Brexit Disclaimer
This website as well as the publications and online tools accessible via this website may contain UK data and analysis based on research conducted before the United Kingdom’s exit from the European Union on 31 January 2020. EU averages or other statistical parameters including the UK reflect the situation in the European Union before 31 January 2020 and should not be considered as representative of the situation in the EU thereafter. Any data or information pertaining to the UK will be gradually phased out from Cedefop’s website, publications and online tools, as ongoing research projects with the United Kingdom’s participation are concluded. Data coming from UK were collected, processed and published before its withdrawal from the EU. Therefore, EU averages contain UK related data up to 2019.

General themes

VET ([1]In the education system and policy of Latvia VET is referred to as ‘vocational education’ (in Latvian: ‘profesionālā izglītība’). The term ‘training’ is not commonly used in the national context.) in Latvia comprises the following main features:

  • VET attractiveness is increasing, especially for early leavers from education;
  • to increase the quality and efficiency of vocational education, many small providers were merged into regional vocational education competence centres offering a wide range of qualifications and other services;
  • there are more females in post-secondary and higher VET;
  • the share of early leavers from education and training has fallen substantially, in line with the national target;
  • apprenticeship-type schemes have become more common and accessible;
  • the introduction of modular vocational education programmes, new occupational standards, sectoral qualifications frameworks supports the use of learning outcomes.

Distinctive features ([2]Cedefop (2017). Spotlight on vocational education and training in Latvia. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8107_en.pdf
)

Initial VET is centralised and highly regulated by the State. Most vocational schools are owned and run by the State; two-thirds have the status of vocational education competence centre and were modernised (infrastructure and equipment) with the support of EU funds in 2007-15. In addition to provision of vocational programmes, they validate non-formal and informal learning and offer lifelong learning and continuing teacher training.

CVET providers are mainly private.

Most vocational education learners (83%) are at upper secondary level. The distribution of students between general and vocational upper secondary education is 61:39 in favour of general education.

VET provides learning opportunities for young adults and early leavers from education. With more investment in infrastructure and the development/implementation of new programmes, VET attractiveness is increasing. More young people use ISCED-P 453 programmes for fast access to labour market than before. These programmes are jointly financed by the Youth guarantee and the European Social Fund.

The national qualifications framework was established in 2010 and referenced to the European qualifications framework (EQF) in 2011. It includes all formal qualifications.

A validation system for professional competences acquired outside formal education has existed since 2011, allowing direct acquisition of professional qualifications at EQF levels 2 to 4. Procedures for assessment and criteria for validation of prior learning were set up for higher education in 2012.

Reforming VET and adult learning are national policy priorities. Recent reforms aim at:

  • promoting VET quality;
  • ensuring its relevance to labour market needs;
  • efficient use of resources to raise VET attractiveness.

Policy strives for a balanced (equal) distribution of students choosing vocational and general education after completing basic education, and for a threefold increase in adult participation in learning.

By 2015, several projects jointly financed by EU Structural Funds had raised VET attractiveness and quality. The projects covered modern infrastructure, equipment and programmes (introducing modules), social partner participation in designing and implementing education policy, introducing sectoral qualifications frameworks, drafting occupational standards for key professions, and raising VET teachers’ competences. Modularisation of vocational education programmes has acquired a legal basis. Content for modular programmes is developed and they are gradually being implemented in vocational education. By 2019/20 all vocational education providers (State and private) have to ensure modular (if applicable) vocational education programmes according to the new occupational standards.

Since 2015, ‘work-based learning’ has been a form of VET implementation. It includes flexible curricula (according to occupation characteristics) and promotes sharing responsibilities of teaching and training between school and enterprises. Vocational education institutions develop the curricula and participate in ensuring the acquisition of theoretical knowledge and practical skills in workshops. Companies provide both theoretical and practical training in a real workplace environment and pay an allowance or a wage to students.

Ensuring access to guidance and counselling for young people, and putting in place ECVET and EQAVET systems for better quality and permeability, are challenges that need aligning stakeholder opinions and extensive promotion. Other challenges include motivating employers to cooperate with VET providers, for example, by offering training at the workplace and promoting continuing training for employees.

The 2014-20 education strategy addresses issues mentioned above and other challenges by continuing reforms (supported by EU funds) including introduction of new EU-level instruments.

Another challenge is to increase adult participation in learning by strengthening the role of the State in adult education. The implementation plan for a new adult education governance model (2016) supports a sustainable adult education system with shared responsibilities between stakeholders, including VET that provides programmes for adults.

Data from VET in Latvia Spotlight 2017 ([3]Cedefop (2017). Spotlight on vocational education and training in Latvia. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8107_en.pdf
), updated in May 2019

Population in 2018: 1 934 379 ([4]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 16.5.2019].)

It decreased by 4.4% since 2013 due to negative natural growth and emigration of people in search of employment abroad ([5]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 16.5.2019].).

As in many other EU countries, the population is ageing.

The old-age dependency ratio is expected to increase from 30 in 2015 to 66 in 2060 ([6]Old-age-dependency ratio is defined as the ratio between the number of persons aged 65 and more over the number of working-age persons (15-64). The value is expressed per 100 persons of working age (15-64).).

 

Population forecast by age group and old-age-dependency ratio

Source: Eurostat, proj_15ndbims [extracted 16.5.2019].

 

Demographic changes have an impact on vocational education and have led to rearrangement of the vocational education institutions network: the number of State governed vocational schools has reduced from 58 in 2010 to 21 in 2018.

To increase the quality and efficiency of vocational education, many small providers were merged into regional vocational education competence centres offering a wide range of qualifications and other services. Several providers were merged by local governments into integrated general and vocational education institutions.

The country has a multicultural community. At the beginning of 2018, 62.2% of the population were Latvians and 25.2% were ethnic Russians; 3.2% were Belarusians, 2.2% were Ukrainians, 2.1% were Poles and 5.1% other nationalities.

State vocational school programmes are in Latvian, while some private providers use Russian or both Latvian and Russian. By 2020 all providers will provide vocational programmes in Latvian only.

Most companies are micro and small-sized.

Main economic sectors:

  • wood-processing;
  • production of chemical products;
  • electrical and optical equipment;
  • manufacture of basic metals;
  • machinery and equipment manufacturing;
  • manufacture of transport and equipment.

Since 2010, the export of Latvian goods and services has grown very quickly, and it is the main driver of economic development.

Domestic demand-oriented industries contributed the most to GDP growth in recent years.

Requirements for non-regulated professions are determined by employers. The Law on Regulated Professions and Recognition of Professional Qualifications and relevant government regulations stipulate special requirements for education programmes, recertification or recognition of qualifications in regulated professions.

The number of regulated professions acquired in secondary vocational education is very limited.

The labour market is generally considered flexible.

Total unemployment ([7]Percentage of active population, 25 to 74 years old.) in 2018: 7.1% (6.0% in EU28); it increased by 0.2 percentage points since 2008 ([8]Eurostat table une_rt_a [extracted 20.5.2019].).

 

Unemployment rate (aged 15-24 and 25-64) by education attainment level in 2008-18

NB: Data based on ISCED 2011; breaks in time series; low reliability for ISCED 0-2 and 5-8, age 15-24.
ISCED 0-2 = less than primary, primary and lower secondary education. ISCED 3-4 = upper secondary and post-secondary non-tertiary education. ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_urgaed [extracted 16.5.2019].

 

Unemployment is distributed unevenly between those with low- and high-level qualifications. The gap has increased during the crisis and has been steady since then. In 2018, there are stark differences between the different ISCED levels. The unemployment rate of people with medium-level qualifications, including most VET graduates (ISCED levels 3 and 4), is almost three times higher than that of people with high-level qualifications (ISCED 5-8), and almost double that of the pre-crisis years. It is also higher compared to the total unemployment rate ([9]Percentage of active population, 25 to 74 years old.) in Latvia (7.1%).

The employment rate of 20 to 34 year-old VET graduates increased from 78.0% in 2014 to 83.3% in 2018 ([10]Eurostat table edat_lfse_24 [extracted 16.5.2019].).

 

Employment rate of VET graduates (20 to 34 years old, ISCED levels 3 and 4)

NB: Data based on ISCED 2011; breaks in time series.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
Source: Eurostat, edat_lfse_24 [extracted 16.5.2019].

 

The increase in employment of 20 to 34 year-old VET graduates at ISCED levels 3 and 4 in 2014-18 (+5.3 pp) was similar to the increase in employment of all 20 to 34 year-old graduates (+5.5 pp) in the same period in Latvia ([11]NB: Breaks in time series. Eurostat table edat_lfse_24 [extracted 16.5.2019].).

Education attainment in Latvia is traditionally high. In 2018, the share of population aged 25 to 64 with upper secondary education including vocational education (ISCED levels 3 and 4) was 56.7%.

The share of people with tertiary education (33.9%) is higher than EU-28 average (32.2%). The share of those with low or without a qualification is the fifth lowest in the EU, following Lithuania, Czechia, Poland and Slovakia.

 

Population (aged 25 to 64) by highest education level attained in 2018

NB: Data based on ISCED 2011. Low reliability for ‘No response’ in Czechia, Iceland, Latvia, and Poland.
ISCED 0-2 = less than primary, primary and lower secondary education.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_pgaed [extracted 16.5.2019].

 

Share of learners in VET by level in 2017

lower secondary

upper secondary

post-secondary

0.6%

38.6%

100%

Source: Eurostat, educ_uoe_enrs01, educ_uoe_enrs04 and educ_uoe_enrs07 [extracted 16.5.2019].

 

Share of initial VET learners from total learners at upper-secondary level (ISCED level 3), 2017

NB: Data based on ISCED 2011.
Source: Eurostat, educ_uoe_enrs04 [extracted 16.5.2019].

 

Traditionally, there are more males in VET (58.8% in upper-secondary education), except at post-secondary level ([12]Source: Eurostat tables educ_uoe_enrs01, educ_uoe_enrs04 and educ_uoe_enrs07 [accessed 18.2.2019].).

The share of early leavers from education and training has decreased from 14.3% in 2009 to 8.3% in 2018. It is below the national objective for 2020 of not more than 10% and the EU-28 average of 10.6%.

 

Early leavers from education and training in 2009-18

NB: Share of the population aged 18 to 24 with at most lower secondary education and not in further education or training.
Source: Eurostat, edat_lfse_14 [extracted 16.5.2019] and European Commission: https://ec.europa.eu/info/2018-european-semester-national-reform-programmes-and-stability-convergence-programmes_en [accessed 14.11.2018].

 

Lifelong learning offers training opportunities for adults, including early leavers from education.

 

Participation in lifelong learning in 2014-18

NB: Share of adult population aged 25 to 64 participating in education and training.
Source: Eurostat, trng_lfse_01 [extracted on 16.5.2019]

 

Participation in lifelong learning in Latvia has increased from 5.6% in 2014 to 6.7% in 2018. It is still below the EU average and far below the national objective (15%) for 2020.

 

VET learners by age group

Source: National data.

 

The share of adults (aged 25 and above) in vocational education has doubled since 2011/12 and reached 12% of the total VET population in 2017/18. This reflects changing labour market needs and the variety of education opportunities for people aged 25+, supported by ESF funds.

The education system comprises:

  • pre-school education (ISCED level 0);
  • integrated primary and lower secondary education (ISCED levels 1 and 2) (hereafter, basic education);
  • upper secondary education (ISCED levels 3 and 4) (hereafter, secondary education);
  • higher (tertiary) education (ISCED levels 5, 6, 7 and 8).

Pre-school education for five to six year-old children is compulsory.

Basic education is mainly general, it is compulsory, and lasts for nine years. Vocational education is mainly offered for learners with mental disabilities or without completed basic education.

Secondary education can be acquired through general or vocational programmes. It is non-compulsory. General programmes last for three years and vocational programmes for four years (after completed basic education).

Higher (tertiary) education includes both academic and professional study programmes.

The Vocational Education Law ([13]Saeima (1999). Profesionālās izglītības likums [Vocational education law]. Last amended 22.6.2017. http://likumi.lv/doc.php?id=20244 
) provides legal regulations and defines three VET levels:

  • basic vocational education;
  • secondary vocational education;
  • professional higher education.

 

Vocational education programmes are mainly school-based, with practical learning periods at schools or enterprises. Since 2015, vocational education can also take the form of an apprenticeship type scheme (nationally called ‘work-based learning’) with flexible curricula implementation taking place alternately at school and enterprise. To acquire a professional qualification (at EQF levels 2 to 4), learners have to undergo qualification practice and take a State qualification exam at the end of the programme.

Basic vocational education

Basic vocational education programmes leading to EQF level 2 (ISCED 254)

These programmes last from one to three years and are part of formal education. The main target groups are learners with intellectual disability and early leavers from compulsory basic education. They lead to a certificate of basic vocational education with a professional qualification at EQF level 2 (such as cook’s assistant, carpenter's assistant).

Vocational education at secondary level

There are four types of secondary vocational education programme.

1) Vocational education programmes (arodizglītība) leading to EQF level 3 (ISCED 353).

These programmes last for three years. They are part of formal education, and they target young people who are at least 15 and have completed basic education. They include general subjects, but not sufficiently to allow access to higher education. To access higher education programmes, students must attend a one-year bridging course.

2) Secondary vocational education programmes leading to EQF level 4 (ISCED 354).

These programmes last for four years. They are part of formal education, and they target young people with completed basic education. They include general subjects; at the end of programme students take four State centralised exams in general subjects. After completion of the programme, learners can enter the labour market or higher education.

3) One-year vocational education programmes leading to EQF level 3 (ISCED 351 or 453)

These programmes last for one year. They are part of formal education, and they target young people who are at least 17 and have completed general basic education. They do not include general subjects. After completion of the programme, learners can enter the labour market.

4) One and a half to three-year vocational secondary education programmes leading to EQF level 4 (ISCED 453)

These programmes last for one and a half to three years. They are part of formal education, and they target young people with secondary education. They do not include general subjects. After completion of the programme, learners can enter the labour market.

Professional higher education

Higher education programmes can be academic (lead to a degree) and professional (lead to a degree and/or professional qualification).

Adult learning programmes

There are two types of adult learning programme:

1) Continuing vocational education

These programmes enable adults with previous education/work experience to acquire a professional qualification ([14]Saeima (1999). Profesionālās izglītības likums [Vocational education Law]. Last amended 22.6.2017.
http://likumi.lv/doc.php?id=20244
) in 480 to 1280 hours. Continuing vocational education and initial vocational education have the same legal and governance framework. Similar to initial vocational education, students of continuing vocational education take a final qualification exam in accordance with procedures approved by the government ([15]Cabinet of Ministers (2011). Profesionālās kvalifikācijas eksāmenu norises kārtība akreditētās profesionālās izglītības programmās [Procedure of professional qualification examinations in accredited vocational education programmes]. Regulation No 662 (last amended 18.12.2012, No 918).
http://likumi.lv/doc.php?id=235206
).

2) Professional development programmes

These programmes (of at least 160 hours) enable people to master systematised professional knowledge and skills corresponding to labour market requirements. They do not have age, previous education, or professional qualification requirements. They do not lead to a formal qualification, but to a certificate of professional development education (profesionālās pilnveides izglītības apliecība) ([16]Cabinet of Ministers (2005b). Kārtība, kādā izsniedzami profesionālās pilnveides un profesionālās ievirzes izglītību apliecinoši dokumenti [Procedures by which documents certifying professional development and professionally oriented education are issued]. Regulation No 902. Last amended 13.12.2016, No 777.
https://likumi.lv/doc.php?mode=DOC&id=122686
).

Other forms of learning

Work-related knowledge, skills and competences can also be acquired through non-formal learning (short courses), or craftsmanship (apprenticeship programmes).

Vocational education programmes are mainly school-based, with practical learning periods at schools or enterprises. Since 2015, vocational education can also take the form of an apprenticeship-type scheme (nationally called ‘work-based learning’) with flexible curricula taking place alternately at school and enterprise. To acquire a qualification (at EQF levels 2 to 4), learners have to undergo qualification practice and take a State exam at the end of the programme.

Learn more about apprenticeships in the national context from the European database on apprenticeship schemes by Cedefop: http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/apprenticeship-schemes/scheme-fiches

Most vocational education providers are governed by the Ministry of Education and Science. Others are under the responsibility of the ministries of culture, welfare and interior. There are also vocational education institutions established (or taken over from the State) by local government and private ones.

The vocational education system is governed by the following institutions:

  • The Cabinet of Ministers (Ministru kabinets) defines policies and strategies for vocational education and sets procedures for the development of occupational standards, the organisation of work placements/apprenticeship-type scheme, and professional qualification exams. It regulates mandatory documents for vocational education provision, a list of mandatory occupational standards, activities of sectoral expert councils, and the quality assurance of the examination centre. It sets the criteria for issuing State-recognised qualifications, and recognising foreign qualifications.

It sets the price list for validation of informal and non-formal learning, it grants the status of ‘vocational education competence centre’ to providers, and it sets the procedure for distributing the State budget subsidies earmarked for teachers’ salaries.

  • The Ministry of Education and Science (MoES) ([17]Izglītības un zinātnes ministrija
    ) develops the framework regulations for vocational education. It proposes allocation of funds from the State budget and finances the vocational education providers it has established. The ministry also organises the implementation of career education, ensures validation of informal and non-formal learning, approves regulations and appoints heads of vocational education institutions under its responsibility.
  • Other ministries (culture, welfare and interior) propose the allocation of funds for vocational schools under their responsibility, and organise continuing professional development for teachers. The ministries also organise continuing vocational education for adults, and professional development and training for the unemployed. They cooperate with MoES on designing occupational standards, ensuring quality assurance and other issues.
  • The National Centre for Education ([18]Valsts izglītības satura centrs (VISC).) is under the supervision of MoES. It develops the content of basic, secondary and continuing vocational education, professional development and vocationally oriented education. It develops the content and procedures for State exams and coordinates development of study materials in line with the State vocational education standards. The centre also coordinates the development of occupational standards and the professional development of vocational teachers.
  • The State Education Quality Service ([19]Izglītības kvalitātes valsts dienests (IKVD).) is under the supervision of MoES. It licenses general and vocational education programmes (at EQF level 1-4). It also ensures quality assurance of vocational education (except professional higher), coordinates validation of informal and non-formal learning (at EQF level 2-4); since 2013 it has coordinated the implementation of the common European quality assurance for VET (EQAVET) in Latvia.
  • The State Education Development Agency ([20]Valsts izglītības attīstības aģentūra (VIAA).) is under the supervision of MoES. It manages and monitors EU funds ex-post, it introduces EU programmes, it supports the development of career education policy, arranges national-level professional skills competitions and ensures participation in international competitions.
  • The Ministry of Welfare ([21]Labklājības ministrija (Ministry of Welfare).) develops labour market policies, including training interventions.
  • The State Employment Agency ([22]Nodarbinātības valsts aģentūra (NVA).) is under the supervision of the Ministry of Welfare. It implements labour market policies, including programmes for the unemployed.
  • Local governments participate in the implementation of vocational education by managing their own schools. They promote business development in their territory, cooperate with employer organisations and help students find work placements.

Social dialogue and strategic cooperation are arranged through the following institutions:

  • the National Tripartite Subcouncil for Cooperation in Vocational Education and Employment ([23]Profesionālās izglītības un nodarbinātības trīspusējās sadarbības apakšpadome. It was founded in 2000 by the ministries of welfare, economy, finance, justice, agriculture, education and science, regional development and local government affairs, the Free Trade Union Confederation of Latvia and the Employers’ Confederation of Latvia.) reviews policy proposals and drafts legal norms for vocational education, human resource development and employment; it evaluates and proposes changes in management, funding and implementation of vocational education; it endorses occupational standards; it endorses annual student enrolment plans prepared by sectoral expert councils.
  • 12 sectoral expert councils (Nozaru ekspertu padomes) propose solutions for long-term human resources development in their respective sectors and ensure that vocational education provision is in line with labour market needs. This includes participation in development of sectoral qualifications frameworks (SQFs), occupational standards, education programmes, quality assessment procedures, work placements, and apprenticeship-type schemes;
  • collegial advisory bodies (conventions) exist in each vocational education institution. Employers or representatives of employers’ organisations, representatives from local government, and representatives from supervising ministries form these conventions. They help shape the development strategy of the education institution, and they contribute to its cooperation with local enterprises, to ensure students’ work placements outside school and apprenticeship-type scheme opportunities ([24]Saeima (1999). Profesionālās izglītības likums [Vocational education law]. Last amended 22.06.2017.
    http://likumi.lv/doc.php?id=20244
    ).

According to Eurostat data, the education budget has decreased from 6.7% of GDP in 2009 to 5.5% in 2016, with a slight increase to 5.8% in 2017 ([25]Eurostat table gov_10a_exp. Last update: 16.5.2018.). The budget for vocational education institutions under the responsibility of the Ministry of Education and Science increased from EUR 54.07 million in 2011 to EUR 70.36 million in 2018 ([26]Saeima (2017). Par valsts budžetu 2018.gadam [Law on State budget for 2018].
https://likumi.lv/ta/id/295569-par-valsts-budzetu-2018-gadam
).

Other resources (including EU funds) have also been allocated to development of the vocational education system. For example, during 2009 to 2015, EUR 163.6 million was invested in the modernisation of equipment and infrastructure. For the same objective, EUR 89.07 million is being invested over 2016 to 2023. Schools also use their own revenues to finance their activities.

Procedures for financing vocational education are stipulated by the Education and Vocational Education Laws ([27]Saeima (1998). Izglītības likums [Education law]. Last amended 20. 9.2018.
http://likumi.lv/doc.php?id=50759; Saeima (1999). Profesionālās izglītības likums [Vocational Education Law]. Last amended 22.6.2017.
http://likumi.lv/doc.php?id=20244
). Education institutions are financed from the State budget, local government budget or private funding according to their ownership. State budget allocations for vocational education programmes are calculated per student.

Salaries of teachers in State and local government education institutions (including pre-schools) are paid from the State budget. Local governments may supplement salaries of teachers. For private schools implementing accredited basic, secondary and higher education programmes the State can also finance salaries of teachers.

The government covers fixed and non-fixed costs ([28]Cabinet of Ministers (2007). Noteikumi par profesionālās izglītības programmu īstenošanas izmaksu minimumu uz vienu izglītojamo [Regulations on expenditures minimum per one student for implementing vocational education programmes]. Regulation No 655 (last amended 3.1.2017, No 4).
http://likumi.lv/doc.php?id=164266
):

  • allowances (scholarships);
  • student residence maintenance;
  • rehabilitation and catering services for students with special needs;
  • culture education and sports activities;
  • practical training in enterprises;
  • accident insurance for practical training in enterprises;
  • salary of employees (wages and employer's State social insurance contributions).

In higher education, the State covers fees for a certain number of negotiated study places for students with good grades. Local governments may charge a fee in municipal sports and music vocational schools. Education institutions may simultaneously implement education programmes funded from different sources.

According to the Education Law ([29]Saeima (1998). Izglītības likums [Education law]. Last amended 20.9.2018.
http://likumi.lv/doc.php?id=50759
), adult education may be financed from the State and local government budgets, employers’ resources, students’ fees, donations and other sources. Some local governments allocate a fixed percentage to adult education from their budget.

Important sources of funding are EU, Norwegian, and Swiss financial assistance instruments, including Structural Funds and Erasmus+ that have helped by creating more learning opportunities for adults through various projects.

In vocational education there are:

  • general subject teachers
  • vocational teachers

The term ‘trainer’ is not used in Latvian vocational education. Teachers provide both theory and practical learning at school. Every vocational education teacher can work in initial and continuing vocational education at basic and secondary education levels.

General subject teachers must have a minimum of either:

  • tertiary education in education and a teaching qualification in the particular subject, or master/doctor degree in education;
  • tertiary education in the relevant field and either a teaching qualification in a particular subject (may be in the process of completing) or working under the supervision of a teacher-mentor for no longer than one year at one school (until 2022).

Vocational teachers must have a professional qualification minimum of either tertiary education in a relevant field (such as engineering) or may be in the process of completing studies (have acquired at least 240 hours), vocational secondary education (EQF level 4), or master of crafts qualification.

Their professional qualification must be complemented by teaching competences acquired in:

  • tertiary teacher education;
  • a teaching-competence development course (72 hours offered by a higher education institution);
  • courses in pedagogy of at least 80 hours in their tertiary education programme.

The requirement for teaching competences does not apply to vocational subject teachers with fewer than 360 teaching hours per year.

Vocational education teachers:

  • implement education programmes according to State vocational education standards, and occupational standards and foster creativity and independence of learners;
  • develop syllabi (to be approved by heads of vocational education institutions);
  • apply new ideas, technologies and methods in the learning process;
  • assess knowledge and skills of learners.

In-company trainers involved in providing an apprenticeship-type scheme must have (as of January 2019) a master of crafts qualification, vocational education or at least three years of relevant work experience. They must also have acquired a 72-hour teaching competence-development course (for teaching in schools) or a special 32-hour teaching competence-development course for in-company trainers of apprenticeships ([30]Cabinet of Ministers (2016). Kārtība, kādā organizē un īsteno darba vidē balstītas mācības [Procedure for organization and implementation of work-based learning]. Regulation No 484. Last amended 12.9.2017.
http://likumi.lv/ta/id/283680-kartiba-kada-organize-un-isteno-darba-vide-balstitas-macibas
).

With the decrease in vocational education institutions since 2010/11, the number of vocational education teachers has decreased by 12%. At the same time, the share of teachers with tertiary education increased from 91% to 93% ([31]For more information see: Daija, Z.; Kinta, G.; Ramina, B. (2016). Supporting teachers and trainers for successful reforms and quality of vocational education and training: mapping their professional development in the EU – Latvia. Cedefop ReferNet thematic perspectives series.http://libserver.cedefop.europa.eu/vetelib/2016/ReferNet_LV_TT.pdf).

The regulations on teachers’ education and professional competences development ([32]Cabinet of Ministers (2018). Ministru kabineta noteikumi Nr.569, 2018.gada 11.septembrī ‘Noteikumi par pedagogiem nepieciešamo izglītību un profesionālo kvalifikāciju un pedagogu profesionālās kompetences pilnveides kārtību’ [Regulations on required teachers’ education and professional qualification and procedure of teachers’ professional competences development].
https://likumi.lv/ta/id/301572-noteikumi-par-pedagogiem-nepieciesamo-izglitibu-un-profesionalo-kvalifikaciju-un-pedagogu-profesionalas-kompetences-pilnveides-...
), adopted in 2014, determine that vocational education teachers should regularly improve their competence through continuing professional development.

Teachers are required to undertake at least 36 hours of continuing professional development every three years. Education institutions register teachers’ continuing professional development in the database of the State Education Information System (hosted by the Ministry of Education and Science).

The Cabinet Regulations ([33]Cabinet of Ministers (2018). Ministru kabineta noteikumi Nr.569, 2018.gada 11.septembrī ‘Noteikumi par pedagogiem nepieciešamo izglītību un profesionālo kvalifikāciju un pedagogu profesionālās kompetences pilnveides kārtību’ [Regulations on required teachers’ education and professional qualification and procedure of teachers’ professional competences development].
https://likumi.lv/ta/id/301572-noteikumi-par-pedagogiem-nepieciesamo-izglitibu-un-profesionalo-kvalifikaciju-un-pedagogu-profesionalas-kompetences-pilnveides-...
) set the framework of two types of competence development programme:

  • 72-hour programmes which award a certificate in pedagogy, teacher career consultant certificate or right to implement a vocational education subject module.
  • 160-hour programmes which award a teacher's certificate for another subject.

Professional competence development of vocational education teachers is mainly provided by the National Centre for Education ([34]Valsts izglītības satura centrs (VISC).), which is subordinated to the Ministry of Education and Science.

There is no evidence on the attractiveness of teaching as an occupation; however, ageing of teachers is observed.

Responsibility for providing labour market forecasts rests with the Ministry of Economics ([35]Ekonomikas ministrija.), which updates reports every other year and the State Employment Agency that updates reports anually ([36]Nodarbinātības valsts aģentūra (NVA).).

The Ministry of Economics produces annual medium- and long-term forecasts. It set up an advisory council for labour market forecasting ([37]Darba tirgus prognozēšanas konsultatīvā padome.), i.e. a platform for dialogue between representatives of the State, employers, employees and local governments.

The annual report with medium- and long-term labour market forecasts ([38]Ministry of Economics (2018). Informatīvais ziņojums ar darba tirgus vidēja un ilgtermiņa prognozēm [Informative report on medium- and long-term labour market forecasts].
https://www.em.gov.lv/files/attachments/DarbaTirgusPrognozes_2018_06_27.pdf and
https://www.em.gov.lv/files/tautsaimniecibas_attistiba/dsp/EMZino_06072018_full.pdf
) includes an overview of labour supply and demand, and education areas, levels and progression routes of the labour force (including vocational education). The Ministry of Education and Science uses the data as well as annual proposals of sectoral expert councils to plan vocational education provision, including numbers of potential students and types of programmes.

The State Employment Agency carries out short-term labour market forecasts and has created a corresponding online tool ([39]https://cvvp.nva.gov.lv/#/pub/pakalpojumi/prognozes/). It also conducts employer express surveys once a year to anticipate changes in the structure of the labour force. The surveys aim at clarifying reasons for changes in demand and supply for occupations. Their results are used to adjust the education offer for the unemployed.

In 2016, the State Employment Agency, in cooperation with the Ministry of Economics, started a national level ESF project Development of labour market forecasting system (2016-21). The system will provide information on skills and professions in the short-, medium- and long-term, as well as information on learning opportunities. Active labour market policy measures will be evaluated and the offer of vocational education programmes will be based on the outcomes of skills forecasts. Currently, work is under way to develop guidelines for the interpretation and practical use of medium and long-term job forecasts. The guidelines’ main target audience is career advisors and education providers, and their development is based on the needs of forecasting users.

The Central Statistical Bureau ([40]Centrālā statistikas pārvalde (CSB).) conducts a labour force survey four times per year and collects data on education levels, employment by type of economic activity and occupation. Data on higher education institutions’ and vocational education provider graduates is collected by the institutions themselves and submitted to the Ministry of Education and Science and to the Central Statistical Bureau for further analysis and publication.

See also Cedefop’s skills forecast ([41]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/skills-forecast) and European skills index ([42]https://skillspanorama.cedefop.europa.eu/en/indicators/european-skills-index)

Vocational education programmes are designed in line with the State education and occupational standards or qualification requirements (if the occupation does not have a standard), and sectoral qualifications frameworks.

The content of vocational education programmes is defined by State vocational education standards ([43]Cabinet of Ministers (2000). Noteikumi par valsts profesionālās vidējās izglītības standartu un valsts arodizglītības standartu [Regulations on the State vocational secondary education standard and the State vocational education standard]. Regulation No 211 (last amended 19. 9.2017, No 564).
http://likumi.lv/doc.php?id=8533
). The standards include strategic aims, basic principles, mandatory content, ratio of theory and practice and evaluation procedures. Vocational education providers also ensure that specific skills and competences required in the occupational standards/professional qualification requirements are included in the programmes they offer.

Occupational standards and professional qualification requirements are elaborated by designated working groups comprising representatives of ministries, local governments, employers, employees, chamber of commerce and industry, NGOs and vocational education providers. The standards are endorsed by the National Tripartite Subcouncil for Cooperation in Vocational Education and Employment. They are reviewed at least once every five years ([44]Cabinet of Ministers (2016). Profesijas standarta, profesionālās kvalifikācijas prasību (ja profesijai neapstiprina profesijas standartu) un nozares kvalifikāciju struktūras izstrādes kārtība [Procedure for the development of occupational standard, professional qualification requirements (if occupational standard is not approved for an occupation) and sectoral qualifications framework]. Regulation No 633.
http://likumi.lv/doc.php?id=285032
).

Since 2007, occupational standards have to include necessary professional competences, skills, and knowledge to perform professional activities. In 2010-15, key occupational standards in 14 sectors were aligned with recent labour market needs and this process is continuing in 2016-21 using ESF support.

In April 2018, 15 sectoral qualifications frameworks were officially approved, marking an agreement between educators and employers on qualifications required by labour market ([45]Cedefop (2018). Latvia: sectoral qualifications frameworks support vocational education development.
http://www.cedefop.europa.eu/en/news-and-press/news/latvia-sectoral-qualifications-frameworks-support-vocational-education-development [accessed 10.8.2018].
). The sectoral qualifications frameworks serve as guidelines for developing occupational standards and implementing vocational education programmes, including modules leading to specialisations.

The new modular approach for vocational education programmes ([46]Cedefop (2013). Latvia – modularisation of VET and work-based learning.
http://www.cedefop.europa.eu/en/news-and-press/news/latvia-modularisation-vet-and-work-based-learning
) includes use of learning outcomes, relevant teaching/learning methods and indicators of achievement. In 2017, the amendments to the Vocational Education Law ([47]Saeima (1999). Profesionālās izglītības likums [Vocational education law]. Last amended 22.6.2017.
http://likumi.lv/doc.php?id=20244
) set the legal framework for the modularisation of vocational education programmes. Modules are defined as parts of professional qualifications and are based on learning outcomes as an assessed and approved set of knowledge, skills and competences. Modular vocational education programmes lead to qualifications at EQF levels 2-4 and their professional content consists of a set of modules. After completing one or several modules recognisable in the labour market, but not proving acquisition of a qualification, vocational schools will have to issue a new type of certificate indicating the programme, module(s), achieved learning outcomes and their assessment. In 2017, modules have been included in the State vocational education standards ([48]Cabinet of Ministers (2000). Noteikumi par valsts profesionālās vidējās izglītības standartu un valsts arodizglītības standartu [Regulations on the State vocational secondary education standard and the State vocational education standard]. Regulation No 211 (last amended 19.9.2017, No 564).
http://likumi.lv/doc.php?id=8533
).

Qualification exams ([49]Cabinet of Ministers (2011c). Profesionālās kvalifikācijas eksāmenu norises kārtība akreditētās profesionālās izglītības programmās [Procedure of professional qualification examinations in accredited vocational education programmes]. Regulation No 662 (last amended 18.12.2012, No 918).
http://likumi.lv/doc.php?id=235206
) that consist of theoretical and practical parts are designed in line with both occupational and State vocational education standards. Representatives from relevant sectoral organisations participate in the examination process.

The Ministry of Education and Science is responsible for policies and strategies to ensure accessibility and quality of education.

Quality is assured through:

  • elaboration of education policy;
  • registration and accreditation of education providers;
  • licensing and accreditation of education programmes;
  • supervising the education process.

The further development of the quality monitoring system is among the priorities of vocational education policy. A principle of accreditation ensures that each programme’s content meets required standards of vocational education provided by public (State, local government) and private institutions ([50]Cabinet of Ministers (2016e). Noteikumi Nr. 831 ‘Kārtība, kādā akreditē izglītības iestādes, eksaminācijas centrus un citas Izglītības likumā noteiktās institūcijas, vispārējās un profesionālās izglītības programmas un novērtē valsts augstskolu vidējās izglītības iestāžu, valsts un pašvaldību izglītības iestāžu vadītāju profesionālo darbību’ [Procedure for accrediting education institutions and examination centres, accrediting general and vocational education programmes, and evaluating professional work of heads of public education institutions]. Regulation No 831. Last amended 18.9.2018.
http://likumi.lv/ta/id/287602-kartiba-kada-akredite-izglitibas-iestades-eksaminacijas-centrus-un-citas-izglitibas-likuma-noteiktas-institucijas
). It also increases the transparency of education provision, and fosters recognition of Latvian qualifications abroad.

The State Education Quality Service ([51]Izglītības kvalitātes valsts dienests (IKVD).) organises licensing and accreditation of vocational education programmes, and accreditation of vocational education providers and examination centres ([52]Examination centre is an accredited commercial company or association in arranging professional qualification exams, which does not implement education programmes.) of State, local government and private entities. A licence is a permission to implement a particular programme that meets all requirements of State education and occupational standards or professional qualification requirements. Providers must ensure proper infrastructure and equipment and, if necessary, obtain an agreement from the relevant professional association. The State Education Quality Service issues a licence for an indefinite period.

Accreditation is the evaluation of the performance of the relevant education provider and/or the quality of implementation of the education programme. As a result of accreditation, an education provider obtains a right for two to six years to issue a State recognised qualification for a particular programme. During the accreditation process, the quality of the implementation of an education programme is evaluated against criteria aligned to EQAVET. For example, when accrediting vocational education programmes (EQF levels 2-4), the following areas of criteria are assessed:

  • content of education – education programmes implemented by institution;
  • teaching and learning;
  • learners’ achievements;
  • support to learners;
  • environment of institution;
  • resources of institution;
  • work organisation, management and quality assurance of institution.

All public continuing vocational education programmes (480 hours or more) and professional development programmes (160 hours or more) must be licensed and accredited by the State Education Quality Service. Providers of professional development programmes (159 hours or less) must obtain a licence from local government. Public providers can offer non-formal learning programmes without a licence.

During the licensing or accreditation process, the State Education Quality Service hires external experts and representatives of sectoral NGOs and employers to evaluate programme compliance with State education standards, occupational standards or professional qualification requirements and other regulations. All experts have specific knowledge of the accreditation process.

The National Centre for Education ([53]Valsts izglītības satura centrs (VISC).) ensures the development of content for vocational education (except higher education) in compliance with the State vocational education standards. It also ensures development and implementation of uniform content for vocational education State examinations, coordinates development of teaching/learning aids complying with State general and vocational education standards, and coordinates teachers’ professional development.

The Higher Education Council ([54]Augstākās izglītības padome.) is responsible for quality assurance of higher (including professional) education. The council takes decisions on accreditation of higher education institutions in general and submits them to the Ministry of Education and Science for approval.

Since 2012, study fields (including all programmes of the same field) undergo joint quality assurance. From 2015, quality assurance of higher education institutions/colleges and study fields, and licensing of study programmes is organised by Higher Education Quality Agency ([55]Augstākās izglītības kvalitātes aģentūra (AIKA).), a department within the Academic Information Centre ([56]Akadēmiskās informācijas centrs (AIC).).

The Academic Information Centre develops and complies with the methodologies and procedures for external quality assessment of higher education institutions/colleges and study fields in line with the standards and guidelines developed by the European Association for Quality Assurance in Higher Education ([57]ENQA). The decision on the accreditation of the study field is taken by the study accreditation committee.

The Academic Information Centre maintains the register of study fields, a public portal ([58]http://svr.aic.lv/Form.aspx?id=contacts) that includes information on higher education programmes and quality assurance of institutions and study fields.

A system for validation of prior learning (EQF levels 2-4) was launched in 2011 after amendments to the Vocational Education Law ([59]Saeima (1999). Profesionālās izglītības likums [Vocational education law]. Last amended 22.6.2017.
http://likumi.lv/doc.php?id=20244
). Accredited education providers and examination centres with a permit from the State Education Quality Service ([60]Izglītības kvalitātes valsts dienests (IKVD).) carry out the validation process according to government regulations ([61]Cabinet of Ministers (2011). Kārtība, kādā novērtē ārpus formālās izglītības sistēmas apgūto profesionālo kompetenci [Procedure how professional competences obtained outside formal education system are assessed]. Regulation No 146 (last amended 30.8.2011, No 663)].
http://likumi.lv/doc.php?id=226788
).

The validation procedure includes the following steps:

  • submission of application;
  • consultation (free of charge) on requirements of relevant occupational standard or professional qualification requirements and the exam procedure;
  • professional qualification exam (for a fee);
  • certification of professional qualification.

Since 2017, ESF support has been used to compensate the cost of the qualification exam both for the unemployed and employed. After successfully passing the exam, a certificate of a professional qualification (EQF level 2-4) is issued according to government regulations ([62]Cabinet of Ministers (2011). Profesionālās kvalifikācijas eksāmenu norises kārtība akreditētās profesionālās izglītības programmās [Procedure of professional qualification examinations in accredited vocational education programmes]. Regulation No 662 (last amended 18.12.2012, No 918).
http://likumi.lv/doc.php?id=235206
). The qualification gives access to labour market.

The validation procedure and criteria for higher education were approved in 2012, following amendments of 2011 to the Law on Higher Education Institutions ([63]Saeima (1995). Augstskolu likums [Law on higher education institutions ]. Last amended 18.10.2018.
http://likumi.lv/doc.php?id=37967
). Knowledge, skills and competences acquired in previous learning may be validated according to learning outcomes of the study course or module (for regulated professions only in a theoretical course or module). Learning outcomes acquired through professional experience may only be recognised in a practical course or module of the study programme ([64]Cabinet of Ministers (2018a). Ārpus formālās izglītības apgūto vai profesionālajā pieredzē iegūto kompetenču un iepriekšējā izglītībā sasniegtu studiju rezultātu atzīšanas noteikumi [Regulations for validation of competences acquired outside formal education or during professional experience and for recognising learning outcomes acquired in previous education]. Regulations No 505.
https://likumi.lv/ta/id/301013-arpus-formalas-izglitibas-apguto-vai-profesionalaja-pieredze-ieguto-kompetencu-un-iepriekseja-izglitiba-sasniegtu
).

An overview of the development and implementation of the system for validation of non-formal and informal learning outcomes (EQF levels 2-7) is provided in the report Implementation of validation of non-formal and informal learning outcomes in Latvia prepared by the Academic Information Centre in 2018.

National policy priorities include increasing the attractiveness of initial vocational education and reduction of early leaving from education.

The education development guidelines 2014-20 ([65]Saeima (2014). Saeimas paziņojums 2014.gada 22.maijā: par Izglītības attīstības pamatnostādņu 2014.-20.gadam apstiprināšanu [Education development guidelines for 2014-20].
http://likumi.lv/doc.php?id=266406
) foresee preventive and compensatory actions, including:

  • promoting youth involvement in leisure and extracurricular activities that increase interest in practical areas and support skills development;
  • providing scholarships for vocational education students;
  • conducting a study on reasons for leaving education early;
  • implementing initial vocational education programmes in the Youth guarantee initiative framework;
  • identifying young NEETs and involving them in education.

Monthly scholarships

Unlike general education students, vocational education students receive monthly scholarships according to government regulations on scholarships ([66]Cabinet of Ministers (2004). Noteikumi par stipendijām [Regulations on scholarships]. Regulation No 740 (last amended 5.12.2017, No706).
http://likumi.lv/doc.php?id=93004
). Students in public vocational education programmes receive a State scholarship of between EUR 10 and 150 per month depending on performance. Orphans/children without parental care (not in care institutions or foster families) and best performers in studies or school social activities receive a higher scholarship.

Scholarships and tax incentives for students of short programmes

17 to 29 year-old students of short programmes in the youth guarantee initiative may receive ESF part-financed scholarship per month up to EUR 70-115.

Tax incentives for individuals are also available and regulated by the Law on Personal Income Tax ([67]Saeima (1993). Par iedzīvotāju ienākuma nodokli [Law on personal income tax]. Last amended 31.5.2018.
http://likumi.lv/doc.php?id=56880
). The Law was amended to introduce, as of January 2017, a tax exemption for apprenticeship scholarships not exceeding EUR 280 per month.

Reduction of taxable income

Individuals may request the State Revenue Service ([68]Valsts ieņēmumu dienests.) to reduce their taxable income by the amount of their education (and medical) expenses up to a maximum of EUR 600 per year (increased in 2018), including expenses paid for brothers/sisters/children under 24 years of age ([69]Saeima (1993). Par iedzīvotāju ienākuma nodokli [Law on personal income tax]. Last amended 31.5.2018.
http://likumi.lv/doc.php?id=56880
). The revenue service is also responsible for monitoring the use of tax incentives. Recent statistics, however, do not include all claims, as expenses may be claimed up to three years after they have been incurred.

For taxation purposes ‘education’ is understood as participation in:

  • accredited education programmes (including higher and vocational education);
  • EU/European economic area occupational learning;
  • skills or qualification development;
  • interest education for children under 18 years of age.

Study loans for tertiary education

Tertiary (including professional) education students can apply for two types of study loan to cover tuition fees and costs of living. Loans are offered by selected banks (or other credit institutions) and are guaranteed by the State ([70]Saeima (1995). Augstskolu likums [Law on higher education institutions]. Last amended 18.10.2018.
http://likumi.lv/doc.php?id=37967
).

Financial support for apprenticeships

The Employers’ Confederation of Latvia started a national level ESF project (2017-23) on vocational education students’ involvement in apprenticeship and work placements. Enterprises, vocational schools and students receive financial support for the project.

Financial support for apprenticeships

The Employers’ Confederation of Latvia started a national level ESF project (2017-23) on vocational education student involvement in apprenticeship and work placements. Enterprises, vocational schools and students receive financial support while part of the project.

The main incentives for companies to provide apprenticeships are:

  • opportunity to prepare the employees they need in a timely manner;
  • to create a positive image of the company in society;
  • to receive financing from the ESF project in this process;
  • an opportunity to pay a student motivational apprenticeship scholarship without paying taxes.

The project is a good support tool to provide additional funding for an employee who trains a student. It provides work safety tools, the opportunity to cover student insurance from the project funds, and purchase a mandatory health check; the project has also provided funding to cover travel costs for learner to get to the company where apprenticeship takes place.

The Education Law ([71]Saeima (1998). Izglītības likums [Education law]. Last amended 20.9.2018. http://likumi.lv/doc.php?id=50759
) stipulates local governments’ responsibility for provision of career education for children and the young; students’ right to receive career guidance and counselling; and responsibilities of heads of education institutions for ensuring access to career development services. The Vocational Education Law ([72]Saeima (1999a). Profesionālās izglītības likums [Vocational education law]. Last amended 22.6.2017. http://likumi.lv/doc.php?id=20244
) determines the responsibility of the Ministry of Education and Science for introducing guidance and counselling in vocational education.

The present career development support system has been in place since 2006. It was launched by a Ministry of Welfare policy paper on improving career guidance ([73]Cabinet of Ministers (2006a). Par Koncepciju Karjeras attīstības atbalsta sistēmas pilnveidošana [White paper on improvement of the career guidance system]. Cabinet Order No 214. http://likumi.lv/doc.php?id=132990
). The paper covers all aspects of lifelong guidance including the mechanisms to ensure better cooperation and coordination between key stakeholders at different levels. The development of career education and widening access to individual career services in a lifelong learning context is also one of policy priorities set by the education development guidelines 2014-20 ([74]Saeima (2014). Saeimas paziņojums 2014.gada 22.maijā: par Izglītības attīstības pamatnostādņu 2014.-20.gadam apstiprināšanu [Education development guidelines for 2014-20]. http://likumi.lv/doc.php?id=266406
) and is implemented with support from public and EU funds.

In 2007, the national guidance and counselling forum (Karjeras attīstības atbalsta sistēmas sadarbības padome) was established. This gathers policy-makers from the relevant ministries, guidance providers, social partners and users. The forum proposes changes at national and local levels, contributing to development of guidance and counselling policy and system. It also cooperates with the Latvian delegation to the European lifelong guidance policy network.

The provision of career education is one of the criteria for assessing quality in general and vocational education schools ([75]Cabinet of Ministers (2016e). Noteikumi Nr. 831 ‘Kārtība, kādā akreditē izglītības iestādes, eksaminācijas centrus un citas Izglītības likumā noteiktās institūcijas, vispārējās un profesionālās izglītības programmas un novērtē valsts augstskolu vidējās izglītības iestāžu, valsts un pašvaldību izglītības iestāžu vadītāju profesionālo darbību’ [Procedure for accrediting education institutions and examination centres, accrediting general and vocational education programmes, and evaluating professional work of heads of public education institutions]. Regulation No 831. Last amended 18.9.2018.
http://likumi.lv/ta/id/287602-kartiba-kada-akredite-izglitibas-iestades-eksaminacijas-centrus-un-citas-izglitibas-likuma-noteiktas-institucijas
). Vocational education competence centres should provide individual career counselling and support measures for career education to help students acquire career management skills ([76]Cabinet of Ministers (2013a). Profesionālās izglītības kompetences centra statusa piešķiršanas un anulēšanas kārtība [Procedure for allocation and nullification of vocational education competence centre status]. Regulation No 144.Last amended 25.8.2015.
http://likumi.lv/doc.php?id=255589
).

The State Education Development Agency (VIAA) represents Latvia in the Euroguidance network and supports implementation of career education policy within the education sector.

The agency develops methodological materials for career guidance practitioners working at schools and guidance materials for young people and adults. VIAA also organises seminars for practitioners, since 2012, including a ‘career week’ in big cities for young people that offers visits to enterprises and meetings with representatives of different occupations; it organises participation of young professionals in international level competitions – EuroSkills and WordSkills – in which Latvian teams have competed successfully since 2010 and 2011 respectively, and, since 2017, has organised SkillsLatvia, the largest national professional skills competition for vocational education learners. The agency also maintains and updates an education opportunities database ([77]See
www.niid.lv [accessed 17.8.2018].
) with information about general, vocational and higher education providers and programmes, as well as about non-formal learning opportunities. VIAA also offers a website ([78]See
www.profesijupasaule.lv [accessed 17.8.2018].
) with information about the world of work.

According to the Support Law for Unemployed Persons and Persons Seeking Employment (Saeima, 2002), the State Employment Agency’s (NVA) functions include ensuring free career advice for the unemployed, job-seekers or other persons and developing career counselling methods and career guidance information.

NVA provides group and individual career consultations. Counselling methods depend on the client’s needs. The first meeting in an individual career consultation is devoted to clarifying the aims of the consultation and selecting the most appropriate working method, which may be focused on exploring professional interests, vocational aptitude, or exploring clients’ knowledge, skills/competences and values. If need be, psychological support is offered, in the form of a client resource assessment to show their strengths for a successful future life planning. The NVA web portal www.nva.gov.lv section Career services ([79]See Karjeras pakalpojumi:
http://www.nva.gov.lv/karjera [accessed 18.7.2018].
) has information on job searching and career decision making, with descriptions of occupations, education opportunities, and self-assessment tests.

According to the Law on Higher Education Institutions ([80]Saeima (1995). Augstskolu likums [Law on institutions of higher education]. Last amended 21.6.2018.
http://likumi.lv/doc.php?id=37967
), students have a right to receive information on issues regarding their studies and potential careers. Higher education institutions have designated career centres that provide information on education and career opportunities.

In the private and NGO sectors, provision of guidance services is underdeveloped, but there are some promising initiatives. An example is the youth consultation web portal ([81]See
www.prakse.lv [accessed 18.7.2018].
) (since 2008), which is considered the largest in Latvia covering career and education issues.

Please also see:

Vocational education and training system chart

Tertiary

Click on a programme type to see more info
Programme Types

EQF 5

College VET

programme

2-3 years

ISCED 554

First level higher professional education (college education) (pirmā līmeņa profesionālā augstākā izglītība (koledžas izglītība)) programme leading to EQF level 5, ISCED 554
EQF level
5
ISCED-P 2011 level

554

Usual entry grade

12+

Usual completion grade

12+

Usual entry age

19+

Usual completion age

21+

Length of a programme (years)

2 to 3

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

a certain number of study places in many programmes are financed by the State.

Is it available for adults?

Y

ECVET or other credits

120-180 ECTS credit points.

Since 2004, Latvia has had a well-established national credit point system. One Latvian credit point corresponds to the workload of one week full-time studies (40 points per academic year). Recalculating in ECTS credits, the amount of Latvian credit points has to be multiplied by 1.5.

Learning forms (e.g. dual, part-time, distance)

Higher education institutions, including colleges (koledža) provide full-time, part-time and distance studies at all levels.

Main providers
  • Higher education institutions (including universities, university colleges, academies, institutes)
  • Colleges
Share of work-based learning provided by schools and companies

=30%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school
  • in-company practice
Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Entry requirement is secondary education.

Assessment of learning outcomes

Learners need to pass a final qualification examination which also includes defence of a qualification paper.

If a learner fails a qualification examination, they are entitled to take a second examination in the following academic year but must cover the costs.

Diplomas/certificates provided

First level professional higher education diploma (pirmā līmeņa profesionālās augstākās izglītības diploms) at EQF level 5.

Examples of qualifications

Accountant, insurance specialist, fitness trainer.

Progression opportunities for learners after graduation
  • labour market
  • professional higher education studies (graduates may have shorter duration of further studies at EQF level 6 if they continue in the same field)
Destination of graduates

Information not available

Awards through validation of prior learning

Y

Learning outcomes are validated based on knowledge, skills, and competences acquired in previous learning or professional experience, as well as learning outcomes achieved in previous learning, with the expected learning outcomes in the respective college study programme by awarding the respective amount of credits.

General education subjects

Y, general education subjects take up at least 17% of the curriculum.

Key competences

Y

The compulsory content includes a module for the development of professional competences in entrepreneurship.

Application of learning outcomes approach

Y

Share of learners in this programme type compared with the total number of VET learners

13% learners of all higher education study programmes.

EQF 6

Professional bachelor

programme,

4 years

ISCED 655

Professional bachelor (profesionālais bakalaurs) programme leading to EQF level 6, ISCED 655
EQF level
6
ISCED-P 2011 level

655

Usual entry grade

12+

Usual completion grade

12+

Usual entry age

19+

Usual completion age

23+

Length of a programme (years)

Minimum 4

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

a certain number of study places in many programmes are financed by the State.

Is it available for adults?

Y

ECVET or other credits

At least 240 ECTS credit points.

Since 2004, Latvia has had a well-established national credit point system. One Latvian credit point corresponds to the workload of one week full-time studies (40 points per academic year). Recalculating in ECTS credits, the amount of Latvian credit points has to be multiplied by 1.5.

Learning forms (e.g. dual, part-time, distance)

Higher education institutions provide full-time, part-time and distance studies at all levels.

Main providers

Higher education institutions (including universities, university colleges, academies, institutes)

Share of work-based learning provided by schools and companies

>=12.5%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at higher education institution
  • in-company practice
Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Entry requirement is secondary education.

Assessment of learning outcomes

Learners need to pass a State examination and defend a final thesis. Study programmes are learning-outcomes based.

Diplomas/certificates provided

Professional Bachelor’s diploma (profesionālā bakalaura diploms)

Examples of qualifications

Lawyer, social worker, civil engineer.

Progression opportunities for learners after graduation
  • labour market
  • second level professional higher education studies
  • master studies
Destination of graduates

information not available

Awards through validation of prior learning

Y

Learning outcomes are validated based on the knowledge, skills, and competences acquired in previous learning or professional experience, as well as learning outcomes achieved in previous learning, with the learning outcomes to be achieved in the respective study programme of the higher education institution by awarding the respective amount of credits.

General education subjects

Y

general education subjects take up 17% of the curriculum

Key competences

Y

Compulsory content includes humanitarian and social sciences study courses, including courses that develop social, communicative and organisational skills, as well as information technology courses. The study courses must include a module for the development of professional competence in entrepreneurship.

Application of learning outcomes approach

Y

Share of learners in this programme type compared with the total number of VET learners

34% learners of all higher education study programmes (academic and professional) including ISCED 655 and 657.

EQF 6 or 7

Professional

higher education programme

(e.g. medical studies),

4-6 years

ISCED 655, 656, 756

Second level higher professional education programme after secondary education (otrā līmeņa profesionālās augstākās izglītības programmas pēc vidējās izglītības) leading to EQF level 6 or 7, ISCED 655, 656 or 756
EQF level
6 or 7
ISCED-P 2011 level

655, 656 or 756

Usual entry grade

12+

Usual completion grade

12+

Usual entry age

23-25+

Usual completion age

27+

Length of a programme (years)

4 for ISCED 655, more than 4 for ISCED 656, 5 minimum for ISCED 756

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

a certain number of study places in many programmes are financed by the State.

Is it available for adults?

Y

ECVET or other credits

240-360 ECTS credit points.

Since 2004, Latvia has had a well-established national credit point system. One Latvian credit point corresponds to the workload of one week full-time studies (40 points per academic year). Recalculating in ECTS credits, the amount of Latvian credit points has to be multiplied by 1.5.

Learning forms (e.g. dual, part-time, distance)

Higher education institutions provide full-time, part-time and distance studies at all levels.

Main providers

Higher education institutions (including universities, university colleges, academies, institutes)

Share of work-based learning provided by schools and companies

>=12.5%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at higher education institution
  • in-company practice
Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Entry requirement is secondary education for ISCED 655, 656 and 756.

Entry requirement can be first level professional higher education (college programme) for ISCED 655.

Assessment of learning outcomes

Learners need to pass a State examination and defend a final thesis. Study programmes are based on learning outcomes.

Diplomas/certificates provided

Professional higher education diploma, diploma of higher professional qualification (profesionālās augstākās izglītības diploms, augstākās profesionālās kvalifikācijas diploms) (at least four years of full time studies for EQF level 6 and at least five years of full time studies for EQF level 7)

Examples of qualifications

Cardiac surgeon, dietitian, occupational health physician

Progression opportunities for learners after graduation
  • labour market
  • master programmes for ISCED 655 and 656
  • doctoral programmes for ISCED 756
Destination of graduates

Information not available

Awards through validation of prior learning

Y

Learning outcomes are validated based on the knowledge, skills, and competences acquired in previous learning or professional experience, as well as learning outcomes achieved in previous learning, with the learning outcomes to be achieved in the respective study programme of the higher education institution by awarding the respective amount of credits.

General education subjects

Y

general education subjects take up 12.5% of the curriculum

Key competences

Y

Compulsory content includes humanitarian and social sciences study courses, including courses that develop social, communicative and organisational skills, as well as information technology courses. The study courses must include a module for the development of professional competence in entrepreneurship (if it was not acquired in lower level study courses).

Application of learning outcomes approach

Y

Share of learners in this programme type compared with the total number of VET learners

7% learners of all higher education study programmes.

EQF 6

Professional

Higher education programme,

1-2 years

ISCED 657

Second level higher professional education programme after bachelor level studies (otrā līmeņa profesionālā augstākās izglītības programma pēc bakalaura līmeņa studijām) leading to EQF level 6 ISCED 657
EQF level
6
ISCED-P 2011 level

657

Usual entry grade

12+

Usual completion grade

12+

Usual entry age

23+

Usual completion age

24+

Length of a programme (years)

1 to 2

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

a certain number of study places in many programmes are financed by the State.

Is it available for adults?

Y

ECVET or other credits

60-120 ECTS credit points.

Since 2004, Latvia has had a well-established national credit point system. One Latvian credit point corresponds to the workload of one week full-time studies (40 points per academic year). Recalculating in ECTS credits, the amount of Latvian credit points has to be multiplied by 1.5.

Learning forms (e.g. dual, part-time, distance)

Higher education institutions provide full-time, part-time and distance studies at all levels.

Main providers

Higher education institutions (including universities, university colleges, academies, institutes).

Share of work-based learning provided by schools and companies

=50%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at higher education institution
  • in-company practice
Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Entry requirement is a bachelor degree or professional bachelor degree, second level higher professional education (after secondary education)

Assessment of learning outcomes

Learners need to pass a State examination and defend a final thesis. Study programmes are based on learning outcomes.

Diplomas/certificates provided

Professional higher education diploma, diploma of higher professional qualification (profesionālās augstākās izglītības diploms, augstākās profesionālās kvalifikācijas diploms)

Examples of qualifications

Fire safety and civil protection engineer, translator, lawyer

Progression opportunities for learners after graduation

Graduates can enter the labour market

Destination of graduates

information not available

Awards through validation of prior learning

Y

Learning outcomes are validated based on the knowledge, skills, and competences acquired in previous learning or professional experience, as well as learning outcomes achieved in previous learning, with the learning outcomes to be achieved in the respective study programme of the higher education institution by awarding the respective amount of credits.

General education subjects

N

Key competences

Y

Compulsory content includes humanitarian and social sciences study courses, including courses that develop social, communicative and organisational skills, as well as information technology courses. The study courses must include a module for the development of professional competence in entrepreneurship (if it was not acquired in lower level study courses).

Application of learning outcomes approach

Y

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 7

Professional master

programme

min 1 year

ISCED 757

Professional master (profesionālais maģistrs) programme leading to EQF level 7, ISCED 757
EQF level
7
ISCED-P 2011 level

757

Usual entry grade

12+

Usual completion grade

12+

Usual entry age

22+

Usual completion age

23+

Length of a programme (years)

Minimum 1

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

a certain number of study places in many programmes are financed by the State.

Is it available for adults?

Y

ECVET or other credits

60 to 120 ECTS, depending on the previous education and field.

Since 2004, Latvia has had a well-established national credit point system. One Latvian credit point corresponds to the workload of one week full-time studies (40 points per academic year). Recalculating in ECTS credits, the amount of Latvian credit points has to be multiplied by 1.5.

Learning forms (e.g. dual, part-time, distance)

Higher education institutions provide full-time, part-time and distance studies at all levels.

Main providers

Higher education institutions (including universities, university colleges, academies, institutes)

Share of work-based learning provided by schools and companies

65%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at higher education institution
  • in-company practice
Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Entry requirement is a bachelor’s degree or professional bachelor’s degree, second level higher professional education (after secondary education)

Assessment of learning outcomes

Learners need to pass a State examination and defend a final thesis. Study programmes are based on learning outcomes.

Diplomas/certificates provided

Professional master’s diploma (profesionālā maģistra diploms)

Examples of qualifications

Economist, electrical engineer, quality manager

Progression opportunities for learners after graduation

Graduates can enter:

  • labour market
  • doctoral studies
Destination of graduates

information not available

Awards through validation of prior learning

Y

Learning outcomes are validated based on the knowledge, skills, and competences acquired in previous learning or professional experience, as well as learning outcomes achieved in previous learning, with the learning outcomes to be achieved in the respective study programme of the higher education institution by awarding the respective amount of credits.

General education subjects

N

Key competences

Y

Compulsory content must include study courses which develop professional competences in entrepreneurship (if it was not acquired in lower level study courses).

Application of learning outcomes approach

Y

Share of learners in this programme type compared with the total number of VET learners

13% learners of all higher education study programmes (academic and professional).

Post-secondary

Programme Types
Not available

Secondary

Click on a programme type to see more info
Programme Types

EQF 2

Mainly

school-based VET,

WBL 65%

ISCED 254

Basic vocational education (profesionālā pamatizglītība) programmes leading to EQF level 2, ISCED 254
EQF level
2
ISCED-P 2011 level

254

Usual entry grade

8

Usual completion grade

9

Usual entry age

15+

Usual completion age

16+

Length of a programme (years)

1-3

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Not applicable

Learning forms (e.g. dual, part-time, distance)
  • school-based learning
  • workshops at school
Main providers

Special education institutions/development centres or vocational education institutions

Share of work-based learning provided by schools and companies

>=65%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • workshops at schools
  • in-company training
Main target groups

The main target groups are learners with intellectual disability and early leavers from compulsory basic education.

Entry requirements for learners (qualification/education level, age)

There are no minimum entry requirements, but learners must be at least 15 years old to enrol.

Assessment of learning outcomes

Learners need to pass a professional qualification examination and qualification practice. The professional qualification examination ([84]Cabinet of Ministers (2011c). Profesionālās kvalifikācijas eksāmenu norises kārtība akreditētās profesionālās izglītības programmās [Procedure of professional qualification examinations in accredited vocational education programmes]. Regulation No 662 (last amended 18.12.2012, No 918).
http://likumi.lv/doc.php?id=235206
) includes both theoretical and practical parts, designed in line with both occupational and State vocational education standards and organised according to government regulations. Representatives from relevant sectoral organisations participate in the examination process.

A learner who fails a qualification examination is entitled to take a second examination in the following academic year, but must covering the costs.

Diplomas/certificates provided

Certificate of basic vocational education (apliecība par profesionālo pamatizglītību), with professional qualification at EQF level 2.

Examples of qualifications

Cook’s assistant, carpenter's assistant

Progression opportunities for learners after graduation

Graduates can:

  • enter the labour market
  • progress to secondary level (vocational) education
Destination of graduates

information not available

Awards through validation of prior learning

N

General education subjects

Y

Key competences

Y

Application of learning outcomes approach

Y

Share of learners in this programme type compared with the total number of VET learners

1% ([85]2017)

EQF 3

Mainly

School-based secondary VET,

WBL 65%,

3 years

ISCED 353

Vocational education (arodizglītība) programmes leading to EQF level 3, ISCED 353
EQF level
3
ISCED-P 2011 level

353

Usual entry grade

10

Usual completion grade

12

Usual entry age

16

Usual completion age

19

Length of a programme (years)

3

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Not applicable

Learning forms (e.g. dual, part-time, distance)

Vocational education programmes are mainly school-based, with practical learning periods at schools or enterprises. Since 2015, vocational education can also take the form of an apprenticeship-type scheme (nationally called ‘work-based learning’) with flexible curricula taking place alternately at school and enterprise.

The learning form of this programme type is contact studies which can also be implemented as an apprenticeship-type scheme.

Main providers

Vocational schools

Share of work-based learning provided by schools and companies

>=65%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • workshops at school
  • in-company training
Main target groups

The main target group is young people after completion of basic education.

Entry requirements for learners (qualification/education level, age)

Entry requirements are 15 years and basic education.

Assessment of learning outcomes

Learners need to pass a professional qualification examination and qualification practice. The professional qualification examination ([86]Cabinet of Ministers (2011c). Profesionālās kvalifikācijas eksāmenu norises kārtība akreditētās profesionālās izglītības programmās [Procedure of professional qualification examinations in accredited vocational education programmes]. Regulation No 662 (last amended 18.12.2012, No 918).
http://likumi.lv/doc.php?id=235206
) includes both theoretical and practical parts, designed in line with both occupational and State vocational education standards and organised according to the government regulations. Representatives from relevant sectoral organisations participate in the examination process.

A learner who fails a qualification examination is entitled to take a second examination in the following academic year but must cover the costs.

Diplomas/certificates provided

Certificate of vocational education (atestāts par arodizglītību) with professional qualification at EQF level 3

Examples of qualifications

Cook, carpenter, gardener

Progression opportunities for learners after graduation

Graduates can:

  • enter vocational secondary education
  • enter the labour market

For admission to higher education, a one-year intermediate general secondary education ‘bridge programme’ must be followed.

Destination of graduates

Information not available

Awards through validation of prior learning

N

General education subjects

Y

The share of theory is 60%.

Key competences

Y

Application of learning outcomes approach

Y

The content of these education programmes, which are elaborated by providers, is defined by the State vocational education standards ([87]Cabinet of Ministers (2000). Noteikumi par valsts profesionālās vidējās izglītības standartu un valsts arodizglītības standartu [Regulations on the State vocational secondary education standard and the State vocational education standard]. Regulation No 211 (last amended 19.9.2017, No 564).
http://likumi.lv/doc.php?id=8533
) and occupational standards ([88]Since 2016, in parallel to the occupational standards, Cabinet Regulations stipulate qualifications requirements and sectoral qualifications framework (SQF) descriptions. In further text, the term ‘occupational standards’ includes all the mentioned documents.) ([89]Cabinet of Ministers (2016). Profesijas standarta, profesionālās kvalifikācijas prasību (ja profesijai neapstiprina profesijas standartu) un nozares kvalifikāciju struktūras izstrādes kārtība [Procedure for the development of occupational standard, professional qualification requirements (if occupational standard is not approved for an occupation) and sectoral qualifications framework]. Regulation No 633.
http://likumi.lv/doc.php?id=285032
) and is based on learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

5% ([90]2017)

EQF 4

Mainly

school-based secondary VET

WBL 50%,

4 years

ISCED 354

Vocational secondary education (profesionālā vidējā izglītība) programmes leading to EQF level 4, ISCED 354
EQF level
4
ISCED-P 2011 level

354

Usual entry grade

10

Usual completion grade

12+

Usual entry age

16

Usual completion age

20

Length of a programme (years)

4

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Not applicable

Learning forms (e.g. dual, part-time, distance)

Vocational education programmes are mainly school-based, with practical learning periods at schools or enterprises. Since 2015, vocational education can also take the form of an apprenticeship-type scheme (nationally called ‘work-based learning’) with flexible curricula taking place alternately at school and enterprise.

Main providers

The main providers are vocational schools and some colleges.

Share of work-based learning provided by schools and companies

>=50%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • workshops at schools
  • in-company training
Main target groups

The main target group is young people after completing basic education.

Entry requirements for learners (qualification/education level, age)

Entry requirements are basic education.

Assessment of learning outcomes

To complete a vocational education programme, learners need to pass a final professional qualification examination and qualification practice. The professional qualification examination ([91]Cabinet of Ministers (2011c). Profesionālās kvalifikācijas eksāmenu norises kārtība akreditētās profesionālās izglītības programmās [Procedure of professional qualification examinations in accredited vocational education programmes]. Regulation No 662 (last amended 18.12.2012, No 918).
http://likumi.lv/doc.php?id=235206
) includes both theoretical and practical parts, designed in line with both occupational and State vocational education standards and organised according to government regulations. Representatives from relevant sectoral organisations participate in the examination process.

Vocational secondary education students must also take State centralised exams in the following general study subjects: Latvian, mathematics, foreign language and one subject selected by the student.

A learner who fails a qualification examination is entitled to take a second examination in the following academic year but must cover the costs.

Diplomas/certificates provided

Vocational secondary education programmes lead to a diploma of vocational secondary education (diploms par profesionālo vidējo izglītību) with professional qualification at EQF level 4.

The State centralised exams in four general subjects provide students with a certificate of general secondary education (vispārējās vidējās izglītības sertifikāts) and the right to enter higher education.

Examples of qualifications

Car mechanic, electronic technician, mechanical engineering technician

Progression opportunities for learners after graduation

Graduates can:

  • enter the labour market
  • continue in higher education after passing the State centralised exams in general study subjects
Destination of graduates

information not available

Awards through validation of prior learning

N

General education subjects

Y

The share of theory is 60%.

Key competences

Y

Key competences are acquired according to the State education standard.

Application of learning outcomes approach

Y

The content of these programmes, which are elaborated by providers, is defined by the State vocational education standards ([92]Cabinet of Ministers (2000). Noteikumi par valsts profesionālās vidējās izglītības standartu un valsts arodizglītības standartu [Regulations on the State vocational secondary education standard and the State vocational education standard]. Regulation No 211 (last amended 19.9.2017, No 564).
http://likumi.lv/doc.php?id=8533
), occupational standards ([93]Cabinet of Ministers (2016). Profesijas standarta, profesionālās kvalifikācijas prasību (ja profesijai neapstiprina profesijas standartu) un nozares kvalifikāciju struktūras izstrādes kārtība [Procedure for the development of occupational standard, professional qualification requirements (if occupational standard is not approved for an occupation) and sectoral qualifications framework]. Regulation No 633.
http://likumi.lv/doc.php?id=285032
), and is based on learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

71% ([94]2017)

EQF 3

Mainly

school-based VET,

WBL 65%

up to 2 years

ISCED 351,453

One year vocational education (viengadīgā arodizglītība) programmes leading to EQF level 3, ISCED 351 or 453
EQF level
3
ISCED-P 2011 level

351 or 453

Usual entry grade

10+

Usual completion grade

11+

Usual entry age

17+

Usual completion age

18+

Length of a programme (years)

1

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Not applicable

Learning forms (e.g. dual, part-time, distance)

Vocational education programmes are mainly school-based, with practical learning periods at schools or enterprises. Since 2015, vocational education can also take the form of an apprenticeship-type scheme (nationally called ‘work-based learning’) with flexible curricula taking place alternately at school and enterprise.

At the end of the learning process there is at least 560 hours of qualification practice, followed by a final qualification examination.

The learning form of this programme type is mainly contact studies which can also be implemented as an apprenticeship-type scheme; however, some programmes are offered in part-time form.

Main providers

The main providers are vocational schools.

Share of work-based learning provided by schools and companies

>=65%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • workshops at schools
  • in-company training
Main target groups

The main target group is young people. Since 2014/15, these programmes have been offered to 17 to 29 year-olds with basic or secondary education in the Youth guarantee initiative using ESF support.

Entry requirements for learners (qualification/education level, age)

Entry requirements are age 17 and basic education (for programmes of ISCED 351) or secondary education (for programmes of ISCED 453 ([95]In Latvia, post-secondary education programmes, in contrast to what their name suggests, belong to secondary education level.)).

Assessment of learning outcomes

At the end of the programme learners must pass a final professional qualification examination.

If a learner fails a qualification examination, they are entitled to take a second examination in the following academic year but must cover the costs.

Diplomas/certificates provided

Certificate of professional qualification (profesionālās kvalifikācijas apliecība) (EQF level 3)

Examples of qualifications

Carer, carpenter, gardener

Progression opportunities for learners after graduation

Graduates can enter the labour market

Destination of graduates

information not available

Awards through validation of prior learning

Y

It is possible to acquire a certificate of professional qualification (EQF level 3) through validation of prior learning.

General education subjects

N

Key competences

N

Application of learning outcomes approach

Y

The content of these programmes, which are elaborated by providers, is defined by the State vocational education standards ([96]Cabinet of Ministers (2000). Noteikumi par valsts profesionālās vidējās izglītības standartu un valsts arodizglītības standartu [Regulations on the State vocational secondary education standard and the State vocational education standard]. Regulation No 211 (last amended 19.9.2017, No 564).
http://likumi.lv/doc.php?id=8533
), occupational standards ([97]Cabinet of Ministers (2016). Profesijas standarta, profesionālās kvalifikācijas prasību (ja profesijai neapstiprina profesijas standartu) un nozares kvalifikāciju struktūras izstrādes kārtība [Procedure for the development of occupational standard, professional qualification requirements (if occupational standard is not approved for an occupation) and sectoral qualifications framework]. Regulation No 633.
http://likumi.lv/doc.php?id=285032
), and is based on learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

9% ([98]2017)

EQF 4

Mainly

school-based VET,

WBL 65%

up to 2 years

ISCED 351, 453

One and a half to three-year vocational secondary education after general secondary education (profesionālā vidējā izglītība pēc vispārējās vidējās izglītības) programmes leading to EQF level 4, ISCED 453
EQF level
4
ISCED-P 2011 level

453

Usual entry grade

12

Usual completion grade

12+

Usual entry age

19

Usual completion age

20+

Length of a programme (years)

1.5-3

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Since 2014/15, these programmes have been offered in the Youth guarantee initiative using ESF support.

Is it available for adults?

Y

ECVET or other credits

Not applicable

Learning forms (e.g. dual, part-time, distance)

Vocational education programmes are mainly school-based, with practical learning periods at schools or enterprises. Since 2015, vocational education can also take the form of an apprenticeship-type scheme (nationally called ‘work-based learning’) with flexible curricula taking place alternately at school and enterprise.

At the end of the learning process there is at least 560 hours of qualification practice, which is followed by a qualification examination.

The learning form of this programme type is mainly contact studies which can be implemented also as an apprenticeship-type scheme. However, several programmes are offered in part-time or distance learning form.

Main providers

The main providers are vocational schools.

Share of work-based learning provided by schools and companies

>=50%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • workshops at schools
  • in-company training
Main target groups

The main target group is young people. Since 2014/15, programmes mainly of one and a half years have been offered to 17 to 29 year-olds with secondary education in the Youth guarantee initiative using ESF support.

Entry requirements for learners (qualification/education level, age)

Entry requirement is secondary education

Assessment of learning outcomes

Learners need to pass a final professional qualification examination.

If a learner fails a qualification examination, they are entitled to take a second examination in the following academic year but must cover the costs.

Diplomas/certificates provided

Short vocational secondary education programmes (ISCED-P 453) lead to a diploma of vocational secondary education (diploms par profesionālo vidējo izglītību) with professional qualification at EQF level 4.

Examples of qualifications

Car mechanic, book-keeper, dental technician

Progression opportunities for learners after graduation

Graduates can enter the labour market

Destination of graduates

information not available

Awards through validation of prior learning

N

General education subjects

N

Key competences

Information not available

Application of learning outcomes approach

Y

The content of these programmes, which are elaborated by providers, is defined by the State vocational education standards ([99]Cabinet of Ministers (2000). Noteikumi par valsts profesionālās vidējās izglītības standartu un valsts arodizglītības standartu [Regulations on the State vocational secondary education standard and the State vocational education standard]. Regulation No 211 (last amended 19.9.2017, No 564).
http://likumi.lv/doc.php?id=8533
), occupational standards ([100]Cabinet of Ministers (2016). Profesijas standarta, profesionālās kvalifikācijas prasību (ja profesijai neapstiprina profesijas standartu) un nozares kvalifikāciju struktūras izstrādes kārtība [Procedure for the development of occupational standard, professional qualification requirements (if occupational standard is not approved for an occupation) and sectoral qualifications framework]. Regulation No 633.
http://likumi.lv/doc.php?id=285032
), and is based on learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

14% ([101]2017)

VET available to adults (formal and non-formal)

Programme Types
Not available

General themes

Luxembourg’s education system (including VET) is shaped by the country’s political, economic, demographic and linguistic particularities, and strongly influenced by its:

  • relatively small territory;
  • multinational population and workforce: almost half of the country’s population have are foreign citizens (47%), among them the largest group being Portuguese (16%) and 24.6% from other European Union countries;
  • multilingualism: there are three official languages (German, French and Luxembourgish);
  • fast growing number of inhabitants since 1991 (the population has increased by 50% to a total of 602 000 inhabitants in 2018).

Distinctive features of VET ([1]Cedefop (2017.) Spotlight on vocational education and training in Luxembourg. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8112_en.pdf
)

Social partner involvement is a core principle in VET policy. The professional chambers act as independent policy institutes; they are represented in the tripartite advisory committee on vocational training and consulted on VET legislation. The 2008 reform reinforced their role, which includes involvement in developing and revising VET programmes. They also accompany enterprises and apprentices through practical training and organise CVET.

Learners have an opportunity to follow cross-border apprenticeship to acquire qualifications that Luxembourg’s education system cannot offer; the number of learners is not always sufficient given the small size of the country. Practical training in a company based in Luxembourg is combined with learning at school in one of the neighbouring countries. Teaching in vocational programmes has been based on units and modules since the VET reform of 2008, which was implemented until 2013/14 ([2]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle]. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
). Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Learner progression to general education or (pre-) VET in secondary education is guided based on achievements and interests, parents’ opinions and the view of education staff, including a (pre-) VET representative.

Close ties with neighbouring countries, multilingualism in all spheres of life and the high share of foreign citizens with a mother tongue other than one of the three official languages have a strong impact on VET. Luxembourg provides more language training than any other country, in terms of both the number of foreign languages studied per learner and time spent in learning. Multilingualism is a strength but also a challenge: the official language used varies, depending on the type and level of education and training.

Tackling youth unemployment and investment in skills are high on the policy agenda. Reinforced stakeholder involvement and youth guarantee measures aim to match young people’s skills/qualifications better to labour market demand, and to target the low-skilled. In line with the Europe 2020 headline targets, national policies focus on keeping the share of early leavers from education and training below 10%. One of the challenges is to ensure education and training equity, irrespective of origin or socioeconomic status. One of the education ministry’s priorities is to ensure a diversified offer to meet the needs of increasingly heterogeneous target groups. Implementation of the 2008 VET reform has revealed weaknesses in the system. Bringing about change was difficult: adapting to new realities was challenging for institutions, teachers and learners. Amendments to current legislation were developed to fine-tune the reform. The law of 22 June 2017 art. 12) which gives its legal basis to the House of Guidance (Maison de l’orientation) also foresees that each secondary school should develop its own clear and general guidance approach.

To give learners better opportunities in the labour market, the education ministry is expanding the apprenticeship offer in vocational and technician programmes.

There is a need for stronger links between the world of education and training and that of work. Emphasis has been put on dovetailing in-company and school-based training phases, and on strengthening on-the-job training requirements. In collaboration with professional chambers, the government promotes implementation of quality assurance in work-based learning. This implies defining the process that will ensure better quality without disrupting doing business.

Data from VET in Luxembourg Spotlight 2017 ([3]Cedefop (2017) Spotlight on vocational education and training in Luxembourg. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8112_en.pdf
).

Population in 2018: 602 005 ([4]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 28.1.2019].)

It increased by 12.1% since 2013 due to immigration ([5]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 28.1.2019].).

Luxembourg's population growth is mainly due to immigration, as the natural balance is relatively low. The share of foreigners in Luxembourg's total population is growing steadily.

As in many other EU countries, the population is ageing.

The old-age dependency ratio ([6]Old-age-dependency ratio is defined as the ratio between the number of persons aged 65 and more over the number of working-age persons (15-64). The value is expressed per 100 persons of working age (15-64).) is expected to increase from 21 in 2015 to 44 in 2060

 

Population forecast by age group and old-age-dependency ratio

Source: Eurostat, proj_15ndbims [extracted 6.05.2019].

 

Demographic changes have an impact on VET.

In 2018, Luxembourg had 602 005 inhabitants. Since 1991 the population has increased by 50% mainly due to immigration, which has a major impact on VET.

The figure below shows that 47% of the country’s population are foreign citizens ([7]Foreign citizens residing in Luxembourg can obtain Luxembourgish nationality by naturalisation. Legislation requires them to attend citizenship training and to pass an oral Luxembourgish language exam.). Their share has more than doubled in the past 25 years. In the first half of the 1960s most of the immigrants came from Italy. However, since 1966, the immigrant population from Portugal increased from 1 100 to 82 400 in 2011 ([8]The latest population census available from 2011.) and became the largest in the country. In 2018, the Portuguese community was 96 800 inhabitants (16.0%).

 

Population structure by nationality - 2018 (%)

Source: Statec 2018- Table b1101 [accessed 30.7.2018].

 

The share of the population with a foreign nationality and a mother tongue other than the official German, French and Luxembourgish languages is high. Multilingualism is one of the country’s strengths but it is also a challenge for education and training. The high share of foreign nationals requires education and training and labour market integration policies. A public agency for integration (Office Luxembourgeois de l'Accueil et de l'Intégration) under the auspices of the Ministry of Family, Integration and the Greater Region implements this policy. This includes providing information on training in the official languages and information about the recognition of foreign diploma and secondary general education ([9]General education is nationally referred to as ‘classical education.) and VET certificates and reports ([10]This information is also easily accessible at
www.guichet.lu and
www.lifelong-learning.lu [accessed 23.1.2019].
).

The economy has undergone structural changes in the past two decades (see Figure below). The industrial economy evolved into a service economy with jobs that often require tertiary level qualifications. Employment in the industrial sector decreased from 16.9% in 1997 to 9.0% in 2017. The service, professional, scientific and technical sectors and the administrative and support service sectors have had the highest growth, from 9.0% to 16.1%. Adapting VET provision to the constantly changing employment structure has been a challenge. In 2017, more than 40% of employment was concentrated in the following sectors:

  • wholesale and retail trade;
  • transport and storage;
  • accommodation and food service activities;
  • public administration and other public services.

The public administration includes civil servants and public employees from the State and municipalities and permanent staff from national railways. In 2016, there were approximately 11 204 teachers; 4 931 of these were in secondary general and technical education ([11]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

 

Employment by activity sector in 1997 and 2017 (%)

Source: Statec 2018 Table - B3003 Emploi salarié intérieur par branche d'activité - données désaisonnalisées 1997-2017

 

Access to skilled craftsperson and commercial activities and some liberal professions is regulated.

Commercial activities and skilled craftsmanship in the territory require a business permit, issued if the manager satisfies qualification requirements and professional integrity. Qualification requirements for skilled craftsperson companies differ depending on the trade. For main craft trades such as baker/confectioner, dental technician, specialist in mechatronics, the manager must have a master craftsperson certificate (brevet de maîtrise) or a bachelor degree (if not linked to the core business it should be complemented with at least two years of professional experience), or a vocational aptitude diploma (diplôme d'aptitude professionnelle, DAP) completed by managing experience of six years in the field. For secondary craft trades such as dry-cleaner/launderer, heating mechanic, the manager must have a DAP or similar in a related field or three years’ professional experience in the activity.

Total unemployment ([12]Percentage of active population, 25 to 74 years old.) (2017): 5.6% (7.6% in EU28), it increased by 1.4 percentage points since 2007 ([13]Eurostat table tps00203 [extracted 25.1.2019].).

 

Unemployment rate (aged 15-24 and 25-64) by education attainment level in 2008-18 ([14]Time series for the 15-24 group must be considered with caution due to the small number of observations taken into account.)

NB: Data based on ISCED 2011; breaks in time series.
ISCED 0-2 = less than primary, primary and lower secondary education.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_urgaed [extracted 16.05.2019].

 

Unemployment differed between those with low- and high-level qualifications only slightly for the age group 25-64 during 2008-18. In 2018 it was the lowest for VET graduates at ISCED levels 5-8 (4.1%) and highest for those at ISCED level 0-2 (6.5%). Since 2008 the unemployment rate of the age group 25-64 has increased for ISCED level 0-2 (by 1.7 percentage points) and 5-8 (1.9 pp.) but remained stable for VET graduates at ISCED level 3-4.

The age group 15-24, however, faced a much higher risk of unemployment during those years (2008-18), especially those having only ISCED level 0-2 who suffered unemployment of 22.4-19.9%.

Employment of 20 to 34-year-old VET graduates is high rate, but decreased between 2014 and 2018, from 88.6% to 81.6%. However, it was always higher than the EU-28 average which was 76.9% in 2014 but increased to 80.5% in 2018.

 

Employment rate of VET graduates (20 to 34 years old, ISCED levels 3 and 4) ([15]Time series must be considered with caution due to the small number of observations taken into account.)

NB: Data based on ISCED 2011; breaks in time series.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education
Source: Eurostat, edat_lfse_24 [extracted on 16.05.2019]

 

The employment rate of VET graduates (20 to 34 years old, ISCED levels 3 and 4) ([16]Time series must be considered with caution due to the small number of observations taken into account.) decreased between 2014 and 2018 by 7.5 percentage points; it increased from 76.9% to 80.5% across the EU-28.

The employment rate of all graduates aged 20 to 34 years was 85% in 2014 and decreased by 1.3 percentage points to 83.7% in 2018. Whereas the employment rate of VET graduates was still above that of all graduates in 2014, in 2018 the employment rate of VET graduates was the below that of all graduates ([17]NB: Break in series. Eurostat table edat_lfse_24 [extracted 16.5.2019].).

Among the working population aged 25-64, 41.9% had ISCED level 5-8, above the EU-28 average of 32.2%, but only 32.8% had ISCED level 3-4, 12.9 percentage points below the EU-28 level. 20.4% of the population only had a low or no qualification (ISCED 0-2), 1.4 percentage points below the EU-28 average.

 

Population (aged 25 to 64) by highest education level attained in 2018

NB: Data based on ISCED 2011. Low reliability for ‘No response’ in Czechia, Iceland, Latvia, and Poland.
ISCED 0-2 = less than primary, primary and lower secondary education.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_pgaed [extracted 16.05.2019].

 

Share of learners in VET by level in 2016

lower secondary

upper secondary

post-secondary

Not applicable

61.0%

100%

Source: Eurostat, educ_uoe_enrs01, educ_uoe_enrs04 and educ_uoe_enrs07 [extracted 31.1.2019].

 

Share of initial VET learners from total learners at upper-secondary level (ISCED level 3), 2016

NB: Data based on ISCED 2011; not applicable for Ireland.
Source: Eurostat, educ_uoe_enrs04 [extracted 31.1.2019].

 

In 2016/17, in lower, middle and upper technical secondary programmes (27 221 learners), there were more males (53%) than females (47%).

The share of early leavers from education and training has fallen from 7.7% in 2009 to 6.3% in 2018. It is below the national target for 2020 of no more than 10%, and the EU-28 average of 10.6% (2018).

 

Early leavers from education and training in 2009-18

NB: Share of the population aged 18 to 24 with at most lower secondary education and not in further education or training; break in series.
Source: Eurostat, edat_lfse_14 [extracted 16.5.2019] and European Commission: https://ec.europa.eu/info/2018-european-semester-national-reform-programmes-and-stability-convergence-programmes_en [accessed 14.11.2018].

 

However, these data are subject to important variations due to the small sample size in the country and may not allow easy identification of the causes of early school leaving at national level. In response to the lack of reliable data, the national education authorities produce annual statistics based on administrative data and on a survey of early school leavers. These data indicate a higher early leaving rate for those up to age 25 (13.5%) ([18]MENJE (2017b). Le décrochage scolaire au Luxembourg, année scolaire 2014-2015 [School drop out in Luxembourg, school year 2014/15]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/secondaire/statistiques-analyses/decrochage-scolaire/decrochage-14-15/index.html
) for 2015 than the rate calculated via the labour force survey for this year. The share of early leavers is relatively high among the migrant population, especially for those not having one of the three national languages as mother tongue.

Lifelong learning offers training opportunities for adults, including early leavers from education.

 

Participation in lifelong learning in 2014-18

NB: Share of adult population aged 25 to 64 participating in education and training; break in series.
Source: Eurostat, trng_lfse_01 [extracted on 16.05.2019]

 

Participation in lifelong learning in Luxembourg has been increasing in the past decade. While it was at 14.5% in 2014, it increased to 18.0% in 2018, almost seven percentage points above the EU-28 average.

 

VET learners in secondary education by age group

NB: VET learners include learners from lower, medium and upper technical secondary education

Source: National data.

 

The education and training system comprises:

  • pre-school education (ISCED level 0);
  • primary and lower secondary education (ISCED levels 1 and 2);
  • upper secondary education (ISCED level 3);
  • post-secondary non-tertiary education (ISCED level 4);
  • higher education (ISCED levels 5, 6, 7 and 8).

School attendance is compulsory between 4 and 16, i.e. for at least 12 years, including two years of pre-school education. At the end of primary education (enseignement primaire), learners receive an end-of-cycle report, stating the level attained for each competence domain. Learners are guided towards either general or vocational secondary education by dedicated councils, which include a teacher working in VET ([19]Following the Law of 29 August 2017 (SCL, 2017d) on secondary education ‘general secondary education’ is nationally referred to as ‘classical secondary education’ (éducation secondaire classique - ESC) while ‘technical secondary education’ is referred to as ‘general secondary education’ (éducation secondaire générale - ESG). However, to allow comparison at EU level, the previous terminology will be kept.). The guidance takes account of learning achievement (based on the end-of-cycle report), parent and teacher opinions and performance in standardised basic skills tests (in relation to the national average).

Secondary education comprises two types with different objectives:

- general secondary education (enseignement secondaire classique ESC) which conveys general knowledge in humanities, mathematics and natural sciences and prepares for higher education studies;

- vocational secondary education, nationally referred to as technical secondary education (enseignement secondaire général) which gives access to higher education and/or to the labour market.

Various programmes at post-secondary and tertiary levels are available as general; others as vocational pathways ([20]Based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

The Luxembourgish VET system comprises initial and continuing VET which are composed of several VET learning options:

  • school-based learning;
  • practical training at school;
  • in-company training in form of apprenticeship or short term work placements.

The dual system is an important feature of secondary VET (hereafter referred to as technical secondary education), which implies a strong relationship between school-based education and work-based learning in enterprises.

In technical secondary education (enseignement secondaire général, ISCED 353 and 354) learners are prepared both for professional life and enrolment in higher education. It is divided into three cycles:

(a) the lower cycle (cycle inférieur);

(b) the medium cycle (cycle moyen);

(c) the upper cycle (cycle supérieur).

A preparatory programme (programme préparatoire) supports learners who find it difficult to adapt to secondary education.

After successful completion of the lower cycle, learners can choose between technical, vocational and technician programmes. Depending on the programme, duration varies between six and eight years. Since 2013/14, all technical secondary programmes are based on principles implemented with the 2008 VET reform, providing also the possibility for learners to move from one type of secondary education to another. Tuition is in French, German and Luxembourgish.

Depending on the occupation, secondary VET programmes may be provided in technical secondary schools or in mixed schools that offer both technical and general secondary education. While most VET learners in 2016/17 attended public schools (86.9%), some were enrolled in private schools that apply national curricula (12.1%) or in private/international schools that do not apply them (1%).

Lower cycle

The lower cycle of technical secondary education (ISCED 244, EQF 1) is considered as pre-VET and lasts three years. It offers learners an orientation phase in which they can decide on their further education pathway. Upon successful completion, they can continue in the medium cycle of technical, technician or vocational programmes.

Practical activities in workshops make up an important part of the technical secondary programmes and focus on supporting learners in choosing their career.

Depending on their performance at the end of primary school, learners are directed to a preparatory (préparatoire) or orientation (orientation) path.

Medium and upper cycles

The medium and upper cycles of technical secondary education offer (mainly) school-based VET programmes, apprenticeships and similar schemes. Learners acquire occupational qualifications for which a certificate or a diploma is awarded. Schooling includes various training schemes, which last from six to eight years, depending on the chosen orientation. There are four different programmes within these cycles:

(a) technical programmes (régime technique) leading to a technical secondary school leaving diploma (diplôme de fin d’études secondaires générales) (ISCED 354, EQF 4);

(b) vocational programmes leading to a vocational capacity certificate (certificat de capacité professionnelle, CCP) (ISCED 353, EQF 2);

(c) vocational programmes leading to a vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) (ISCED 353, EQF 3);

(d) technician programmes (régime de la formation de technicien) leading to a technician diploma (diplôme de technicien, DT) (ISCED 354, EQF 4).

Learners can choose between three different training programmes which (can) include an apprenticeship contract and lead to different qualifications:

  • vocational capacity certificate (certificat de capacité professionnelle, CCP) at EQF level 2 always includes an apprenticeship contract. This programme is designed for learners facing difficulties in being accepted on another programme and lead to semi-skilled worker skills ;
  • vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) at EQF level 3 can be done under an apprenticeship contract or an internship contract. They provide the graduate access to the labour market as a skilled worker;
  • technician programme (diplôme de technician, DT) at EQF level 4 which are school-based and include a job placement of 12 or more weeks. They are mostly organised under an internship contract but can also be organised under an apprenticeship contract. This programme offers in-depth and diversified competences and a higher part of general education than the vocational programmes.

Learners are responsible for finding a training place in an enterprise. The vocational guidance service of the public employment service (Agence pour le Développement de l'Emploi, ADEM) supports young people through counselling and a central register of all available apprenticeship places.

Once the learner has signed a contract with a company, (s)he has the legal status of an apprentice and receives an apprenticeship allowance which varies between EUR 400 and 1 300 depending on the trade/profession learned ([21]https://www.lllc.lu/fr/formation-professionnelle-initiale/indemnites-d-apprentissage-nouveau-regime-dt-dap-ccp). Upon successful completion of an academic year, learners receive a premium allowance based on a monthly rate of EUR 130 for CCP or EUR 150 for DAP and DT. The best apprentices receive an award which also includes a prize of EUR 1 500.

Enterprises offering apprenticeship places need to comply with certain criteria, verified by the professional chambers. Financial support and an award to encourage their engagement are available. VET trainers, who receive special training, supervise the apprentices in the training companies. In accordance with the amended VET legislation of 2008, an apprenticeship is based on key principles such as:

• qualitative assessment of learning outcomes (transcript of acquired and non-acquired skills rather than marks in figures);

• modular system allowing apprentices who fail a required module to continue their training and catch up at a later stage during their apprenticeship ([22]Cedefop (2017.) Spotlight on vocational education and training in Luxembourg. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8112_en.pdf
).

Learn more about apprenticeships in the national context from the European database on apprenticeship schemes by Cedefop: http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/apprenticeship-schemes/scheme-fiches

The Ministry of National Education, Children and Youth ([23]Ministère de l'Éducation Nationale, de l’Enfance et de la Jeunesse (MENJE). Hereinafter referred to as education ministry.) is responsible for all types of education, including initial and continuing VET. Initial and continuing higher education is under the Ministry of Higher Education and Research ([24]Ministère de l'Enseignement Supérieur et de la Recherche (MESR). Hereinafter referred to as higher education ministry.). In cooperation with the Ministry of Labour, Employment and the Social and Solidarity Economy ([25], Ministère du Travail, de l’Emploi et de l’Économie Sociale et Solidaire (MTE). Hereinafter referred to as labour ministry.), the Ministry of National Education, Children and Youth is also responsible for training measures for the unemployed.

Higher education is under the responsibility of the higher education ministry.

Cooperation between the State and the social partners is a core principle in VET. As stated in the law reforming VET ([26]SCL (2008). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273–3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
), social partners are essential stakeholders who contribute to its organisation and implementation. The professional chambers’ opinion is systematically sought on laws and regulations on economic, financial and social policy: labour law, social security, taxation, the environment, initial and continuing vocational training, and education. Development and periodic revision of programmes are ensured by curriculum teams.

There are five professional chambers in Luxembourg. The Chamber of Commerce ([27]Chambre de Commerce.), Chamber of Trades and Skilled Crafts ([28]Chambre des Métiers.) and Chamber of Agriculture ([29]Chambre d’Agriculture.) represent employers. The Chamber of Employees ([30]Chambre des Salariés.), and Chamber of Civil Servants and Public Employees ([31]Chambre des Fonctionnaires et Employés Publics.) represent wage earners. These chambers act as independent policy institutes; they are involved in Luxembourg’s legislative procedures and are officially consulted on education matters. They are represented both at national (Economic and Social Council, Tripartite Advisory Committee on Vocational Training) and at European level (Cedefop Governing Board, Advisory Committee on Vocational Training). In contrast to trade unions and employers’ associations, membership in the professional chambers is compulsory (with an annual subscription) for all employees and private companies.

The professional chambers were created by law in 1924 ([32]SCL (1924). Loi du 4 avril 1924 portant création de chambres professionnelles à base élective. Mémorial A, A(2).
http://www.legilux.public.lu/leg/textescoordonnes/compilation/code_administratif/VOL_1/CHAMBRE_PROF.pdf
) and in 1964 (Chamber of Civil Servants and Public Employees ([33]SCL (1964). Loi du 12 février 1964 ayant pour objet de compléter la loi du 4 avril 1924, portant création de chambres professionnelles à base élective par la création d’une chambre des fonctionnaires et employés publics. Mémorial A, 13, 230.
http://www.legilux.public.lu/rgl/1964/A/0230/1.pdf
). They are public establishments, legal persons governed by civil law. Although the professional chambers are supervised by the government, they enjoy financial autonomy. Since 1929, the chambers have been involved in initial education, especially with regard to VET preparing for an occupation. They also have substantial powers regarding apprenticeships; in 1945, their remit in the establishment, supervision and termination of apprenticeship contracts was extended. Their power and involvement were reinforced by the 2008 law reforming VET ([34]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273–3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2 and SCL (2008b). Loi du 19 décembre 2008 portant révision du régime applicable à certains. Mémorial A, 207, 3135–3138.
). Their involvement in vocational training includes:

  • identifying training needs;
  • guidance and information on training;
  • determining the professions or trades offered in VET;
  • training offers;
  • organising training;
  • designing framework training programmes;
  • assessing training programmes and the training system;
  • qualifications and validating experience acquired.

Professional chambers have established a platform for supervisors/tutors where they can find all the necessary support during apprenticeship. They have also created the label ‘training enterprise’ to put the companies committed to training young people into the limelight.

The Chamber of Commerce and the Chamber of Trades and Skilled Crafts have appointed apprenticeship counsellors for each trade and profession. Their main mission is to inform companies and apprentices about vocational training issues (legislation, organisation, programmes, class visits). They also assist enterprises and apprentices in practical process where they:

  • can intervene as mediators in case of disagreement or conflict between the company, the school or the apprentice;
  • participate in organisation of intermediary tests and support the relationship between the school and the company in case of difficulties;
  • are available to apprentices who need to reorient themselves and find an appropriate apprenticeship;
  • follow their evaluation and, if needed or concerned, take part in the class council and in the disciplinary councils;
  • signal irregularities in legislation on vocational training to the competent institutions.

The professional chambers are also authorised by law to organise continuing training courses.

The Education Ministry has created two new structures, to improve the adaptation of schools to the needs of learners and the professional world.

A National Programme Council ([35]Conseil national des programmes.) was created alongside the National Observatory of School Quality at the beginning of 2018, to allow more exchanges and debates about educational matters and to build a bridge between the educational and professional worlds. It should represent the voice of society in discussions about school programmes. The council has eight members (at least three men and at least three women), chosen according to their experience and expertise in different fields such as culture, economics, ecology, associations and others ([36]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.
http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf
).

Total total government expenditure for public education in percentage of GDP increased from 4.8% in 2008 to 5.0% in 2017 ([37]Eurostat - Table gov_10a_exp [accessed 7.11.2018].). Luxembourg devotes the highest level of financial resources to education per learner among the OECD ([38]OECD - Table 10.1787/ca274bac-en [accessed 7.11.2018].) countries. At secondary level, the expenditure per learner is EUR 18 484, while the OECD average is about EUR 8 080 ([39]OECD (2015). Regards sur l’éducation 2015 [Education at a glance 2015].
http://www.oecd.org/education/education-at-a-glance-2015.htm
, [40]European Central Bank Euro foreign exchange reference rate as on 3 June 2016 EUR/USD=1.1154,
https://www.ecb.europa.eu/stats/exchange/eurofxref/html/index.en.html [accessed 9.1.2019].
).

In 2017, funding for initial public education was EUR 2.09 billion ([41]MENJE (2018b). Rapport d’activités 2017 [Activity report 2017]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/rapports-activites-ministere/rapport-activite-2017/index.html
), shared between the three levels of initial education: primary, general secondary, and technical secondary. Education is financed at two levels: central government and local administrations (106 municipalities).

In 2015, more than half (54.5%) of the funding went to primary education (EUR 928 million). At secondary level, expenditure on technical education was higher (EUR 517 million, 30.4% of total funding) than general education (EUR 258 million, 15.1% of total funding). It covered remuneration of teachers, administrative and technical staff, operating costs and investments.

 

Investment in education 2002-15

Source: MENJE 2018.

 

Public funding for general and VET schools was slightly, but constantly, increasing up to 2012. In 2013, it fell by 3.7% but increased in 2014 (+8%) and remained stable in 2015 (+1%). There was a break in time series in 2009; since then the State has been fully in charge of remunerating primary education teachers, previously shared between the State and the communes.

Public funding includes:

  • teachers’ salaries;
  • non-teaching staff salaries;
  • current expenses (goods and services to ensure the daily functioning of educational services; school allowances; care of children outside school hours at municipal level for extra-curricular and after-school activities; the costs incurred by school medicine and school transport);
  • capital expenses (movable and immovable assets).

 

School funding in 2015, % (EUR million)

Source: MENJE (2018). The key figures of national education : statistics and indicators 2016-17. http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html

 

As shown in the above figure, salaries make up the highest costs of all education programmes (73-77%). The share is greater in primary education (77%) than in secondary education. The share of current expenses is higher in primary (14.5%) education than in general (12.5%) or in technical (13.0%) secondary education, possibly because care of children outside school hours at municipal level is costlier at this level.

 

Funders of public education in 2015

Source: MENJE (2018). The key figures of national education: statistics and indicators 2016-17. http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html

 

According to the latest available data, total central government expenditure (the cumulative expenditure of the various ministries and administrations involved in the financing of education) was nearly EUR 1 390 million. With a total contribution of 81.7%, the State is the primary funder of education in Luxembourg. The 106 communes contribute 18.3%, or about EUR 311 million.

Apart from national funds, money spent on public education can also come from foreign sources. The Schengen-Lyzeum Perl is a German and Luxembourgish high school set up in 2007, located in Germany close to the border. Learners can acquire the general and technical secondary school leaving diplomas (administrative and commercial division). The Landkreis Merzig-Wadern (LKMV), a German neighbouring district, pays 60% of the running costs and 50% of the building maintenance and investment in school equipment. The Luxembourg State pays the other part.

Funding for individuals in higher education

The government offers higher education learners financial support in the form of a grant and a loan (basic grant: EUR 1 000, mobility grant: EUR 1 225, grant on social criteria: EUR 0 to 1 900, family grant: EUR 250, student loan: EUR 3 250, registration fee: EUR 0 to 1 850) per academic semester: the grant and loan proportions depend on the applicant’s income ([42]http://portal.education.lu/etudes/Laide-financi%C3%A8re [accessed 6.3.2017].). Tuition fees are taken into account when calculating the financial support. In each academic year, higher education learners apply for the support twice: before the winter and summer semesters ([43]SCL (2010). Loi du 26 juillet 2010 concernant l’aide financière de l’état pour études supérieures. Mémorial A 118, 2039 - 2043.
http://www.legilux.public.lu/leg/a/archives/2010/0118/a118.pdf#page=2
).

Funding continuing VET

Continuing training for employees or for individuals (private initiative) is normally funded by the enterprises or individuals themselves. However, in some sectors, companies must pay a levy to sectoral training providers to benefit from specific access conditions and prices. Companies may also contribute to training centres voluntarily to benefit from specific access conditions and prices. Companies and individuals can receive support and incentives for CVET, often non-financial but linked to working time arrangements.

Funding training for the unemployed and other vulnerable groups

Training for the unemployed and other groups excluded from the labour market is supported by the labour and the education ministries. The labour ministry finances training schemes run by the national centres for continuing vocational training and training schemes run by private centres under contract with the labour and the education ministries. The public employment service also provides financial support for different training programmes for job seekers.

Some projects for job seekers are jointly financed by the European Social Fund. Most are focused on job segments with a high development potential, such as Fit4coding (development of skills for the IT sector) or Fit4 Greenjobs (in cooperation with Institute for Construction Training - IFSB) ([44]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.
http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf
).

The Law of 25 March 2015 established different teacher careers in the Luxembourgish educational system.

Teacher career

Type of teacher

Type of teaching

Required diploma

Secondary school Teachers A1

Technical and general secondary education

BA and MA

Technical education Teachers A2

Technical secondary education

BA

Master of technical education B1

Technical secondary education

Master craftsman diploma or BTS

There are no additional specific access or training requirements for VET teachers beyond a diploma and language requirements (proficiency in the three administrative languages). Recruitment procedures and training provisions for teachers in general secondary education are the same as for teachers in technical secondary education.

All teacher applicants must have a relevant bachelor or master degree for the subject that is being taught. They must pass an examination, and complete a three-year induction course at the Training Institute of National Education (Institut de formation de l’Éducation nationale, IFEN) created in 2015 ([45]SCL (2015). Collection of laws concerning the Training Institute of National Education. Mémorial A, 166.
http://www.legilux.public.lu/leg/a/archives/2015/0166/a166
). During the induction course, future teachers are already teaching at secondary schools while attending a teacher education programme at the IFEN. The induction course ends with a final examination.

Luxembourg University has provided a master degree in secondary education since the 2016-17 academic year, accessible to students holding a bachelor degree in maths, Romance or German languages, who wish to develop the necessary didactic skills to teach in class. Trainee teachers can thereby acquire teaching skills before applying for the examination at the IFEN. The programme includes courses in educational sciences, sociology of education, and psychology, to provide learners with the necessary skills to understand and meet the challenges of teaching in a multicultural and multilingual school system. Four options are available: maths, French language and literature, German language and literature, Luxembourgish language and literature.

The Chamber of Commerce has a training programme for teachers providing continuing vocational training, to facilitate the transfer and appropriation of knowledge by learners. This programme provides fundamental tools for effective teaching, as well as specific aspects to help perfect teachers’ pedagogic approaches.

The law of 19 December 2008 stipulates that an enterprise offering training or apprenticeship has to designate one or more tutors to mentor apprentices throughout their apprenticeship. The tutor is in charge of the practical training and the pedagogic supervision of the apprentice. He is also appointed as the contact person for the apprenticeship counsellor and the competent professional chamber with regard to the progress of the apprentice. The law has increased the responsibility of the tutor for training and assessment of the apprentices. The training of tutors has become central to increasing and assuring the quality of initial and continuing vocational training and in promoting the recognition of diplomas and certificates across the borders. Participation in tutor training is mandatory for each enterprise involved in the training of one or more apprentices. Each tutor has to undergo three-day training, organised by the competent professional chamber. A trainer holding a master craftsperson diploma (Brevet de Maîtrise) or equivalent is exempted from this mandatory training. The training Tuteur en Entreprise (Tutor in company) comprises a legal section, a pedagogic section and a section on assessment. It gives tutors useful tools to set up a training path, manage the relationship with the apprentice, identify the mission of the tutor and be able to help apprentices integrate in the working world and the enterprise ([46]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

The Training Institute of National Education (IFEN) designs, implements and evaluates the professional insertion (internship) and the continuing professional development of teachers and psycho-social staff in education.

Continuing professional development has become increasingly important over the years and is now considered a professional duty in the Luxembourgish education system. A new regulation has entered into force, in which the minimum mandatory continuing training for secondary school teachers has been increased to 48 hours over three years. Within the SCHiLW framework (Schulinterne Lehrer/innen-Weiterbildung - School teachers’ continuing training), the IFEN supports secondary schools that are willing to set up training plans (plans de formation, not compulsory). These plans contribute to greater coherence between the school’s objectives and teachers’ training activities.

The continuing training offer is elaborated by the IFEN in collaboration with school staff, who are consulted annually, and upon their request. IFEN endeavours to meet individual needs that have been identified at various levels, as well as political decisions. Continuing professional development is therefore organised according to training objectives and the availability of the teachers being trained, such as seminars (one-off training courses), training days, conferences, sequential continuing training (introductory module followed by a practical phase which may or may not be accompanied by an exchange and intensification phase). In a period of rapid technological change, it is essential that VET teachers continuously update their vocational skills and knowledge, to ensure trainees leave the VET system with skills that can be put into practice immediately.

In order to contribute to the academic success of learners, training offered aims to develop, in priority, the following teachers’ professional skills:

  • priority 1: teaching and learning in a competence-based approach;
  • priority 2: teaching and learning language skills in a multilingual context;
  • priority 3: information and communication technologies;
  • priority 4: teamwork and communication;
  • priority 5: personal professional development;
  • priority 6: school development;
  • priority 7: school management;
  • priority 8: socio-educational work.

Each year new continuing training courses are proposed in order to answer to individual needs or needs identified at regional or national level.

VET standards are developed in cooperation between the education ministry and the professional chambers. Curricula are based on occupational standards and informed by skill needs in enterprises. The following institutions ensure VET provision in line with labour market needs:

  • Permanent Labour and Employment Committee (Comité Permanent du Travail et de l’Emploi): the ministries of education and labour, cooperate through this committee. It is responsible for reviewing the labour market situation regularly. Its working methods include analysis of job supply and skills demand;
  • Training Observatory: established in 2012 by the National Institute for the Development of Continuing Vocational Training (INFPC); it provides the government and social partners with detailed statistics and reliable qualitative analyses on training issues; these are useful insights for public policy and private strategies in the lifelong learning domain;
  • Employment Observatory: established by the labour ministry; analyses labour market data, publishes a labour market dashboard and organises annual conferences on relevant labour market issues and employment;
  • Competence Observatory: to help improve initial and continuing training offers, the University of Luxembourg competence centre (previously Luxembourg International University Institute - Institut Universitaire International Luxembourgeois, IUIL), in cooperation with companies, identifies and anticipates competence needs in sectors and occupations. Analyses cover the trade, law, health, food and catering sectors, management, socio-professional integration and green professions;
  • Business Federation of Luxembourg: since 1997 has conducted annual surveys ([47]This survey is conducted in collaboration with the Luxembourg Bankers' Association, the Luxembourg Confederation of Commerce, the Chamber of Commerce and the education ministry, with support from the European Union (EURES).) on skill needs, alternatively in the industrial and in the information technology and communication sectors. It explores skill needs of enterprises to achieve a good balance between vocational training supply and labour market demand. The survey is the basis for the Qualifications of tomorrow (Les qualifications de demain) publication. It offers forecasts of enterprise skill requirements for replacements and new job openings, and the associated qualification levels. The publication provides young people and their parents with insights into education paths and encourages public authorities, professional chambers and other VET actors to take account of enterprises’ training needs in CVET ([48]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

See also Cedefop’s skills forecast ([49]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/skills-forecast) and European Skills Index ([50]https://skillspanorama.cedefop.europa.eu/en/indicators/european-skills-index)

The development of the VET qualifications is based on the following elements:

  • occupational profile: lists the areas of activities as well as the activities and tasks of future occupations after two to three years of workplace experience;
  • training profile: based on the occupational profile by areas of competence: occupational and general competences;
  • training programme based on the training profile:

- defines the learning outcomes for each competence and regroups them by learning domain;

- organises the learning domains and outcomes in modules and credits;

- curriculum: determines the content of the different modules.

The main bodies responsible for designing qualifications are curriculum teams and national vocational commissions ([51]SCL (2011). Règlement grand-ducal du 30 juillet 2011 portant institution et organisation des équipes curriculaires, des commissions nationales de formation et des commissions nationales de l’enseignement général pour la formation professionnelle de l’enseignement secondaire technique. Mémorial A 173.
http://legilux.public.lu/eli/etat/leg/rgd/2011/07/30/n3/jo
). A curriculum team is associated with a specific profession or group of professions; training centres and schools are equally represented. The education minister decides on the maximum number of representatives for each team. The curriculum team:

  • develops and revises programmes for the trades and professions it is responsible for;
  • ensures consistency between the objectives of school-based and work-based training;
  • provides guidelines and procedures for continuous assessment of learners at school and in the workplace, in cooperation with the respective committees. The guidelines and procedures feed into evaluation frameworks adopted by the education minister;
  • develops and evaluates the ’integrated project’ (projet integré) that replaces the former final exams. The project aims to check whether the learner has developed the complex competences needed to solve a real or simulated work situation.

National vocational commissions (commissions nationales de formation) exist for each division, trade and profession of general and technical secondary education; they propose course content, methods and evaluation criteria to the education minister. The commissions are made up of:

  • a teacher from each school where vocational or technician programmes are offered;
  • a representative of the national general education commissions, designated by the minister;
  • a representative of each professional chamber associated to the training;
  • representatives of the higher council of health professions and employer representatives in the case of health sector professions;
  • employer representatives of education and social institutions, in the case of social sector professions.

A Division for Curriculum Development ([52]SCL (2017). Loi du 14 mars 2017 portant modification de la loi modifiée du 7 octobre 1993 ayant pour objet: (1) la création d’un Service de Coordination de la Recherche et de l’Innovation pédagogiques et technologiques; (2) la création d’un Centre de Gestion Informatique de l’Éducation ; (3) l’institution d’un Conseil scientifique. Mémorial A 439.
http://memorial.lu/eli/etat/leg/loi/2017/03/14/a439/jo
) was created within the Department for Coordination of Educational and Technological Research and Innovation (SCRIPT) within the Ministry of Education, to simplify the implementation of the 2008 reform. It provides support to the national commissions of programmes in elementary and secondary education, as well as the curriculum teams and national vocational commissions of vocational training, assisting in their tasks, developing and adapting curricula. This division coordinates the work of national commissions, guarantees the implementation and supervises the coherence and consistency of curricula. The division works in close collaboration with various stakeholders to guarantee the scientific framework of curriculum development. It also works in collaboration with the recently installed National Programme Council.

The development and implementation of the European qualifications framework for lifelong learning (EQF) is seen as an opportunity to make explicit the existing education and training levels and the links between them. The key objective of the eight-level national qualifications framework (cadre luxembourgeois des qualifications, CLQ) is to increase the transparency of qualifications. The CLQ serves as a non-binding guiding framework for stakeholders: individuals, education and training providers, and the labour market.

The CLQ was referenced to the EQF and the qualifications framework in the European higher education area (QF-EHEA) in 2012. Beginning in 2014, a committee represented by the education ministry and the higher education ministry published a report which detailed the links between the CLQ and the EQF and to the QF-EHEA. Levels 6-8 include qualifications awarded by Luxembourg University only. VET qualifications have been assigned to EQF levels 2-5, with the higher technician and the master craftsperson certificate, for instance, at the latter.

The philosophy of the CLQ is to show that lifelong learning is not fragmented and that it should not be restricted to formal qualifications. The referencing report, however, only reflects formal education and training, which is changing and moving towards a learning outcomes approach. Once this change is complete, a new report reflecting an adjusted lifelong learning framework, including qualifications acquired through non-formal and informal learning, will be published ([53]Based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

A national approach to quality assurance has been devised, and evaluation and review procedures are in development stage. There is no real quality framework, but legislation and the current organisation take the quality component into account.

Quality standards for VET providers are part of legislation and are used for accreditation and funding. Guidelines and standards are used to promote a culture of continuous improvement. Over the past 10 years, the education and training system has been overhauled to provide the resources needed to cope with the challenges of a rapidly changing environment. Administrative structures have been changed to allow modern school management with a degree of autonomy. In 2004, the legislation promoted partnership-based school community approaches and school initiatives to improve the quality of education. For VET programmes the education ministry coordinates the implementation of the EQAVET recommendation ([54]See EQAVET recommendation at
http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32009H0708(01)&from=EN [accessed 6.3.2017].
).

National indicators related to the 10 proposed by the recommendation are used and monitored nationally. While most are applied in IVET, their use for CVET, which is not monitored centrally, varies by sector or provider.

Secondary education - School development plan, PDS ([55]Plan de développement de l’établissement scolaire (PDS).)

The school development plan (PDS) was introduced by the law of 15 December 2016 ([56]SCL (2016). A-N° 263 du 21 décembre 2016.
http://legilux.public.lu/eli/etat/leg/loi/2016/12/15/n1/jo
).

Schools should describe their school and extracurricular activities in the school development plan to outline their profile and analyse their general situation, as well as constantly to develop and innovate. This approach covers domains that may help their learners receive the best quality education. Each school should elaborate its own steps in a series of areas that are critical for success.

Seven domains are foreseen for secondary education:

  • organisation of pedagogical support. Each learner should have access to remedial measures that meet their needs and capabilities;
  • supervision of children with specific needs to provide tailor-made solutions for their needs and support their learning process;
  • partnerships with parents to improve their involvement in the schooling process and create a partnership culture between families and schools;
  • integration of information and communication technologies (ICT) to prepare learners for the challenges of the employment market influenced by ICT;
  • psycho-social support for learners who face problems at school, or have psychological or family problems, to prevent school dropouts/failure;
  • relevant guidance for learners to help them make the right choices, according to their profiles;
  • extracurricular activities to guarantee equal access for all learners to non-formal learning opportunities, in addition to mainstream classes.

For each of these domains, national objectives have been defined in a national reference framework. Secondary schools are free to choose the domains and objectives they need to focus on.

The school development plan also contains:

  • definition of at least one objective from the description and analysis mentioned above;
  • an action plan for each objective (persons in charge, resources needed, schedule, evaluation criteria);
  • an evaluation and continuous adaptation of the current PDS.

Following the law of December 2016 ([57]SCL (2016). A-N° 263 21 décembre.
http://legilux.public.lu/eli/etat/leg/loi/2016/12/15/n1/jo
), as of the 2017/18 school year each secondary school should elaborate a PDS produced by a school development committee ([58]Cellule de développement scolaire (CDS).). The school development committee is coordinated by the school directorate and includes school staff appointed by the director for a three-year period that may be renewed. Its mission is to analyse and interpret the school’s data, to identify the school’s priority needs, to define school development strategies, to elaborate the school charter, the profile and the PDS, and to ensure internal and external communication, while establishing a triennial plan for the continuing training of its high-school staff.

The Division for the Development of Schools ([59]Division du développement des établissements scolaires.) from the Department for Coordination of Educational and Technological Research and Innovation (SCRIPT) was set up according to the law of 14 March 2017 ([60]SCL (2017). Loi du 14 mars 2017 portant modification de la loi modifiée du 7 octobre 1993 ayant pour objet: (1) la création d’un Service de Coordination de la Recherche et de l’Innovation pédagogiques et technologiques; (2) la création d’un Centre de Gestion Informatique de l’Éducation; (3) l’institution d’un Conseil scientifique. Mémorial A 439.
http://memorial.lu/eli/etat/leg/loi/2017/03/14/a439/jo
). Its mission is to accompany schools in their general approach to school development and, more specifically, to elaborate and implement the PDS, collaborating with various departments, educational structures, national and international partners, who may to optimise the quality of schools. The Division for the Development of Schools has provided several transversal tools, such as a website ([61]https://portal.education.lu/developpementscolaire/Accueil-Lyc%C3%A9es) dedicated to the development of schools, forms allowing schools to coordinate and follow up their PDS, and adaptable questionnaires to facilitate data collection about the perception of school actors.

The school development committee has been working on the PDS since September 2017; it was then adopted by the Education Ministry in September 2018.

A National Observatory of School Quality ([62]Observatoire national de la qualité scolaire.), created at the start of 2018, is responsible for evaluating and supervising the quality of the education system. It is an independent structure. The observatory systematically evaluates the quality of the school system and the implementation of education policies. It does not assess the individual work of teachers, but the organisation and operation of schools and the Ministry of Education. The observatory is composed of eight observers, from public or private sectors, who are totally independent. They visit schools and meet representatives for various school stakeholders, such as parents, learners and teachers, and have exchanges with Education Ministry departments. The Observatory produces an annual activity report and at least one thematic report on a priority area. Every three years, it produces a national report on the school system with its findings and recommendations.

These reports are transmitted to the Government and the Chamber of Deputies and made accessible to the public.

The Division for Data Analysis of The Department for Coordination of Educational and Technological Research and Innovation (SCRIPT) is commissioned to collect and analyse data on the quality of the education offer by analysing school reports or in the context of a project. The results of the surveys may be consulted during the elaboration of a PDS or before making decisions to improve the school’s organisation. This division organises national and international standardised tests. Standardised tests elaborated by the Luxembourg Centre for Educational Testing (University of Luxembourg) and common tests are used as instruments of formative or summative evaluation or the individual learner guidance process. International tests like the OECD’s PISA (Programme for international student assessment), the IEA’s ICILS (International computer and literacy study) generate results which help with the governance of the education system.

Tertiary education

Short-cycle programmes leading to higher technician certificates (BTS) ([63]Brevet de technicien supérieur.) are evaluated externally before being accredited by the higher education ministry for a period of five years. After this time, the accreditation has to be renewed through a new evaluation. This procedure should ensure that the programmes are relevant to the related professional sector ([64]SCL (2010). Règlement ministériel du 15 mars 2010 portant sur l’accréditation des programmes de formation menant au brevet de technicien supérieur. Mémorial A 65.
http://legilux.public.lu/eli/etat/leg/rmin/2010/03/15/n1/jo
).

The university is largely free to design and implement its own quality assurance processes. At Luxembourg University, quality culture and regular quality control through internal and external evaluation of teaching, research and technical, administrative and logistics services are key elements. External audit of the University of Luxembourg has been conducted every four years since 2008 by an external evaluation committee. The independent Committee of External Evaluation is appointed by the Minister for Higher Education and Research.

The University of Luxembourg produces a key performance indicators report in the frame of a multiannual development contract between the Luxembourgish government and the university (2014-17) ([65]Contrat d’établissement pluriannuel entre l’Etat et l’Université du Luxembourg, 2014-17.); this includes publications per researcher, bachelor degrees awarded, master degrees awarded, and master recruitment rate.

Luxembourg has been a member of the European quality assurance register for higher education (EQAR) since 2008 ([66]Although there are no agencies registered in Luxembourg three foreign EQAR agencies operate in the country.).

Continuing VET

Even though there is no real quality framework, quality is a major concern and is covered in the legislation and in the organisation of CVET. Quality will be a major issue in the future of CVET.

The white paper on the national lifelong learning strategy ([67]Anefore (2012). Livre blanc - Stratégie nationale du lifelong learning [White book on the national lifelong learning strategy].
http://www.men.public.lu/catalogue-publications/adultes/informations-generales-offre-cours/livre-blanc-lifelong-learning/131025-s3l-livreblanc.pdf See also
www.S3l.lu
), defines six cross-cutting key principles and related measures and recommendations for implementation. These include developing the quality of lifelong learning and establishing a framework for the quality of adult education and training. This framework will be based on:

  • a quality label awarded to training providers that meet specified criteria in structure and content of the training offer;
  • accreditation of training offers. A working group on training provider accreditation was set up in 2014.

A quality label for municipal governments and non-profit associations can be awarded in CVET by the education minister for a five-year period ([68]SCL (2000). Règlement grand-ducal du 31 mars 2000 ayant pour objet: (1) de fixer les modalités des contrats conventionnant des cours pour adultes et les conditions d’obtention d’un label de qualité et d’une subvention; (2) de créer une Commission Consultative à l’Education. Mémorial A 34, 846-848.
http://www.legilux.public.lu/leg/a/archives/2000/0034/a034.pdf#page=2
). Courses must be of general interest in so-called areas of general education and social advancement. They must meet educational and financial quality criteria. Objectives and course content must be in line with the priorities for adult education.

Quality criteria and priorities are defined for periods of up to five years by the education ministry based on the advice of the Adult Education Advisory Committee ([69]Commission Consultative à l'Éducation des Adultes.). The committee consists of the persons in charge of the Adult Education Department, two representatives delegated by schools offering evening classes, a representative of the Department of Vocational Education and a private sector representative. The committee may also involve adult training experts in its work.

While some private providers commit to quality assurance approaches, a large part of adult education is not subject to systematic evaluation or quality assurance ([70]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

The 2008 legislation ([71]SCL (2008). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience.

Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([72]SCL (2010). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([73]SCL (2016). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the minister. Validation is possible for technical school-based programmes, all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma, or to a part thereof. Experience must be directly related to the requested certification. At higher technician certificate level, an ad hoc evaluation committee is set up for each individual asking for recognition of prior learning.

At university level, validation of non-formal and informal learning allows experience to be recognised with a view to accessing various bachelor or master university studies. The request is considered by a board of examiners whose members are appointed by the chancellor, following recommendation of the dean of the relevant faculty.

Formal VET leads to seven European qualification levels (1 to 7). The 2008 legislation ([74]SCL (2008). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience.

For more information about arrangements for the validation of non-formal and informal learning please visit Cedefop’s European database ([75]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/european-database-on-validation-of-non-formal-and-informal-learning).

Individual training leave

The objective of individual training leave is to ease access to continuing training. Employees working in a company for at least six months, self-employed workers and individuals in a liberal profession (and having been affiliated to the social security system for at least two years) can benefit from 80 days of paid leave during their entire career, but not more than 20 days per two years. Employers can have salaries reimbursed by the government. Training must be provided by an institution issuing certificates recognised by the government. The employee is required to submit a request to the education ministry which then approves the leave – stating the number of days granted – or refuses it.

Language training leave

Language training leave allows employees, the self-employed and individuals in a liberal profession of all nationalities to learn Luxembourgish for social and professional integration. The courses take place during normal working hours. The maximum paid leave is 200 hours over a professional career. Each leave hour entitles employees to a compensatory allowance equal to their average hourly salary paid by the employer. The employer advances the allowance and is reimbursed 50% by the State. The request must be sent to the labour ministry by the employer prior to the start of the course; the leave can be deferred by the employer if it disrupts company operations.

Unpaid training leave and personal working time arrangement

The 2006 Grand Ducal regulation on the organisation of working time (organisation du temps de travail) ([76]SCL (2006). Règlement grand-ducal du 30 mars 2006 portant déclaration d’obligation générale d’un accord en matière de dialogue social interprofessionnel relatif à l’accès individuel à la formation professionnelle continue conclu entre les syndicats OGB-L et LCGB d’une part et l’Union des Entreprises Luxembourgeoises, d’une autre. Mémorial A 85.
http://legilux.public.lu/eli/etat/leg/rgd/2006/03/30/n2/jo
) stipulates a general obligation to reach an agreement on access to CVET through inter-occupational social dialogue to be signed between the trade union federations and the Union of Enterprises. Organising working hours within a flexi-time arrangement and unpaid leave for vocational training purposes is part of this regulation.

Unpaid training leave releases a worker from duties to take part in professional training. The agreement applies to private sector employees who have been employed for at least two years, regardless of the type of employment contract. During the leave, the employment contract is suspended. The employer can refuse the unpaid leave, if the applicant is a high-level executive or if the company has fewer than 15 employees. The employer can also defer the unpaid leave for up to one year where the leave is no more than three months or for up to two years where the leave exceeds three months.

Employees working flexi-time may request amendment of their working time to support participation in training. The employer can refuse to grant such an amendment based on operational needs or impact on the efficient organisation of the business.

Tax exemptions

Every income tax payer may deduct expenses for professional development from taxable income. Such expenses must have a direct link with the business activity performed by the employee and allow improving professional knowledge. They must be paid by the participant and refund claimed through a tax declaration ([77]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

State shared funding for CVET

A company can receive State funding (operated by the education ministry) for investment in CVET. Private companies established in Luxembourg that undertake most of their activities inside the country are eligible. The training targets:

  • employees affiliated with the national social security system;
  • persons bound to the company by an employment contract (fixed-term or permanent);
  • subcontractors working for the applicant company;
  • owners of craft, trade, industry, agriculture or forestry companies.

Investment in training is capped according to the size of the company:

  • at 20% of total payroll for companies with 1 to 9 employees;
  • at 3% of total payroll for companies with 10 to 249 employees;
  • at 2% of total payroll for companies with more than 249 employees.

The share of funding is calculated based on the investment in CVET ([78]SCL (2018a). Loi du 13 mars 2018 portant création d’un Observatoire national de la qualité scolaire. Mémorial A 183.
http://legilux.public.lu/eli/etat/leg/loi/2018/03/13/a183/jo
). Companies receive direct grants: 15-35% of investment (depending on employee profiles).

Support for learning Luxembourgish

Private sector companies legally established in the country can partly recover the costs associated with learning Luxembourgish. Eligible costs include training fees and the costs of study materials and are paid by the labour ministry.

Funding for additional apprenticeship places

The fund for employment provides financial support for the creation of apprenticeship places to encourage enterprises to hire apprentices. It partly reimburses the apprenticeship allowance (27% for vocational DAP programme ([79]Vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP).) and 40% for the vocational CCP programme ([80]Vocational capacity certificate (certificat de capacité professionnelle, CCP).)) and covers the employer’s share of social security costs for the apprentice ([81]SCL (2012). Règlement grand-ducal du 31 octobre 2012 fixant les conditions et modalités des aides et primes de promotion de l’apprentissage. Mémorial A 239, 3153-3154.http://www.legilux.public.lu/leg/a/archives/2012/0239/a239.pdf#page=5). Applications for financial support must be submitted by the enterprises and the apprentice to the public employment service before 1 July of the year following the year in which the learning ended.

Apprenticeship award for a training company

Since 2013, the award for the best training company has been presented each year during the apprenticeship graduation ceremony to the company that commits itself most to apprenticeships (creation of apprenticeship places, follow-up of apprentices) ([82]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

Most guidance services offered during secondary education, operate within the guidance house (maison de l’orientation, 2012). The initiative centralises administrations and counselling services that help people move into working life. It focuses on young people but anyone can find information and advice there. The guidance house includes:

  1. the vocational guidance service of the public employment service (Adem) which provides information on trades/professions and apprenticeship placement;
  2. the Psycho-Social and Educational Accompaniment Centre (CePAS) which helps learners in their school or career guidance and may provide psychological support;
  3. the National Youth Service (SNJ) which supports the acquisition of practical experience through the voluntary Youth Service;
  4. the Local Bureau for Youth (Antennes locales pour jeunes) which offers individual coaching to achieve school or professional projects;
  5. the school reception centre for newcomers for 12 to 17 year-old immigrant learners;
  6. the Centre of Documentation and Information on Higher Education (CEDIES).

This centralisation ensures better coordination of services and stakeholders, while improving visibility.

In 2017 the Guidance Forum (Forum orientation) was set up this is a national council in charge of establishing a national information and guidance strategy. It includes ministries, social partners, directors of secondary schools, parent and learner representatives. The guidance forum has adopted the following definition of guidance:

’Guidance refers to a series of activities that enable the citizen, at any time in his/her life:

  • to identify his/her abilities, skills and interests;
  • to make informed decisions as regards his/her studies and training choices as well as his/her professional activities.

The shared goal is to foster personal fulfilment and the development of society.’

Since 2017, every secondary school must develop its own general guidance approach. The approach has to be in accordance with the reference framework for school and professional guidance elaborated by the guidance house ([83]MENJE (2017a). Cadre de référence pour l’orientation scolaire et professionnelle [Reference framework for school and professional guidance]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/secondaire/psychologieorientation/170124-cadre-reference/index.html
). In each secondary school, a guidance unit is responsible for the implementation of the guidance process set out in the school's development plan (PDS). It is composed of at least two members of teaching staff,

two educational or psychosocial staff and at least one guidance counsellor.

The Higher Education Documentation and Information Centre (Centre de Documentation et d’Information sur l’Enseignement Supérieur) is available to people who require general information about higher education.

The web portal Anelo ([84]https://www.anelo.lu/) is an information and exchange platform for all young people preparing for training, studies or work experience. It centralises information on:

  • trades and professions ([85]http://beruffer.anelo.lu);
  • the steps to follow during a job search;
  • ePortfolio tool that allows young people to gather important documents and certificates showing their strengths and skills;
  • how to gain practical experience in the world of work (jobs for students, volunteer services);
  • where to find information on guidance and support.

The Anelo Web portal and the various connected sites are now being managed by the Guidance House Coordination Department. They are also in charge of promoting the portal and training courses to help young people use the various tools on Anelo.

The Youth guarantee ([86]http://www.jugendgarantie.lu/) was launched in June 2014. It commits national authorities (National Employment Agency, Local Action for Youth, National Youth Service) to offer young people between 16 and 25 high-quality guidance to help them find a job, make it possible to return to school or an apprenticeship, or to offer work experience in projects on a voluntary basis. Each is offered support tailored to his/her background, personal situation and aspirations. Diversification of the school offer is the main priority for education policies in Luxembourg. A recent reform provides growing autonomy to schools to boost this diversification and to support individual school efforts to innovate.

Choosing the right school is becoming more challenging for learners; the MENJE has launched a platform www.mengschoul.lu to help young people and their parents. The platform is for learners going into secondary education, as well as for those going into higher secondary education and foreign learners joining the Luxembourgish school system. The platform is based on a standardised detailed portrait of each school. An interactive map allows users to filter secondary schools according to the innovative projects on offer; other filters allow users to select the school programmes. This tool helps parents and learners to compare VET schools and their specificities to make the best choice. [87]Based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf

Please see:

Vocational education and training system chart

Tertiary

Click on a programme type to see more info
Programme Types

EQF 5

Higher technician

programmes (BTS),

2 years

ISCED 554

Higher technician programme (brevet de technicien supérieur, BTS) leading to EQF level 5, ISCED 554
EQF level
5
ISCED-P 2011 level

554

Usual entry grade

15-17 ([152]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

17 and later ([153]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

19-20

Usual completion age

21-22

Length of a programme (years)

2

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

N

Registration fees

Is it available for adults?

Y

ECVET or other credits

120 credits

Learning forms (e.g. dual, part-time, distance)

Information not available

Main providers

Public and private secondary schools, and technical secondary schools recognised by the State.

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

BTS programmes alternate; they provide both theoretical instruction including general education (like languages) and training in a work environment ([154]www.bts.lu).

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

To be admitted to the programme, learners require either a general or a technical secondary school leaving diploma (diplôme de fin d'études secondaires classique, diplôme de fin d’études secondaires générales), or a technician diploma (diplôme de technicien – DT) complemented by optional modules.

Assessment of learning outcomes

The BTS programme is organised in modules spread over four semesters. Each module has between 5 and 20 ECTS credits and can be composed of different courses with at least one ECTS credit.

Attendance at courses, practical training courses and any other pedagogical activities organised as part of the training is compulsory.

Each course is subject to knowledge assessment that results in a grade. The score is either the result of a continuous assessment carried out during the six-month period, or of a final examination carried out exclusively during an examination session, or by these two assessment modes combined.

 

Diplomas/certificates provided

Graduates receive the higher technician certificate (brevet de technicien supérieur, BTS;

Examples of qualifications

Nurse, paediatric nurse, responsible for exploitation of automated installations, game artist, character designer

Progression opportunities for learners after graduation

Graduation from the higher technician programme does not provide progression possibilities to any other programme.

Destination of graduates

Information not available

Awards through validation of prior learning

Validation of non-formal and informal learning (Validation des acquis de l'expérience – VAE) allows experience to be recognised with a view to obtaining all or part of a higher technician certificate (Brevet de Technicien Supérieur – BTS).

VAE is for everyone, regardless of age, level of study or professional status. The prerequisite is to have completed at least three years or 5 000 hours of paid, unpaid or voluntary work directly related to the requested certification, whether continuous or not.

In order to identify the diploma matching his/her experience, the applicant is advised to consult the list and obtain information from the schools and colleges in question. Some BTS qualifications are not yet accessible through VAE.

The validation application and registration application should be sent to the Head of the school/college in question in order to obtain the diploma. The validation application is accompanied by a portfolio which must set out, with reference to the diploma sought, the knowledge, aptitude and skills that the applicant has gained through experience.

Based on the proposal of the college director, the ministry appoints an ad hoc committee for each training programme.

This committee assesses the validation request and the portfolio and interviews the applicant. It may request a placement into a professional situation (whether real-life or simulated). While deliberating, it assesses the knowledge acquired through experience with regard to the curriculum of the desired diploma.

The ad hoc committee may take one or several of the following decisions:

  • exemption from producing one of the certificates set out by Article 10 (1) of the Law of 19 June 2009 (setting out the terms and conditions for higher education courses of study leading to a higher technician certificate (BTS));
  • registration, provided that an additional part of the curriculum is completed;
  • exemption from attending some of the training modules or classes comprising the modules;
  • exemption from compliance with some of the validation measures;
  • exemption from all of the modules, classes and examinations leading to the diploma being granted.
General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 6

Professional bachelor

programmes,

3 years

ISCED 655

Professional bachelor programmes leading to EQF level 6, ISCED 655
EQF level
6
ISCED-P 2011 level

655

Usual entry grade

16-17 ([155]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

19-20 ([156]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

19-20

Usual completion age

21-22

Length of a programme (years)

3

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

Information not available

Is it available for adults?

Y

ECVET or other credits

180 to 240 credits

Learning forms (e.g. dual, part-time, distance)

- academic teaching

- applied courses

- internship abroad and/or case studies

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

- practical training at school

- in-company practice abroad

- case studies

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Professional bachelor (bachelor professionnel) programmes are accessible to holders of a general or technical secondary leaving diploma or a technician diploma in the field of study.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Graduates receive an application-oriented bachelor degree (professional bachelor, bachelor professionnel).

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Progression to professional or academic Master programme is possible.

Destination of graduates

Information not available

Awards through validation of prior learning

At university level, validation of non-formal and informal learning allows experience to be recognised with a view to accessing various bachelor or master university studies. The request is considered by a board of examiners whose members are appointed by the chancellor, following recommendation of the dean of the relevant faculty ([157]http://www.lifelong-learning.lu/Detail/Article/Diplomes/pour-les-diplomes-universitaires----bachelor-et-master/en and
http://legilux.public.lu/eli/etat/leg/loi/2009/06/19/n1/jo
).

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 7

Professional master

programme,

2 years

ISCED 757

Professional master programme leading to EQF level 7, ISCED 757
EQF level
7
ISCED-P 2011 level

757

Usual entry grade

19-20 ([158]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

20-21 ([159]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

21

Usual completion age

23

Length of a programme (years)

2

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Information not available

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

Information not available

Is it available for adults?

Y

ECVET or other credits

60 to 120 credits

Learning forms (e.g. dual, part-time, distance)

Information not available

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Learners need to hold a (professional) bachelor degree to enter the professional master programme.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Graduates receive an application-oriented master degree (professional master, Master professionnel).

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Graduates holding a professional master programme can progress to academic PhD programmes.

Destination of graduates

Information not available

Awards through validation of prior learning

At university level, validation of non-formal and informal learning allows experience to be recognised with a view to accessing various bachelor or master university studies. The request is considered by a board of examiners whose members are appointed by the chancellor, following recommendation of the dean of the relevant faculty ([160]http://www.lifelong-learning.lu/Detail/Article/Diplomes/pour-les-diplomes-universitaires----bachelor-et-master/en and
http://legilux.public.lu/eli/etat/leg/loi/2009/06/19/n1/jo
).

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

Post-secondary

Click on a programme type to see more info
Programme Types

EQF 5

Master craftsperson

programmes

ISCED 453

Master craftsperson programmes leading to EQF 5 and ISCED 453 – Brevet de maîtrise.
EQF level
5
ISCED-P 2011 level

453

Usual entry grade

Applicants , who must be at least 18, must hold one of the following qualifications:

  • vocational aptitude diploma (Diplôme d'aptitude professionnelle - DAP) 
  • technician's diploma (Diplôme de Technicien - DT)
  • general secondary school leaving diploma (Diplôme de fin d'études secondaires classiques - DFESC)
  • technical secondary school leaving diploma (Diplôme de fin d'études secondaires générales - DFESG)
  • Any other post-secondary qualification (higher technician's certificate (Brevet de technicien supérieur - BTS), bachelor, master)
  • A foreign diploma or certificate recognised by the Ministry of Education, Children and Youth
Usual completion grade

Not applicable

Usual entry age

18+

Usual completion age

Not applicable

Length of a programme (years)

Information not available

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

N

Is it continuing VET?

Y

Is it offered free of charge?

The registration fee for preparatory courses is EUR 600 per year of registration.

The registration fee for exams is EUR 300 per exam session.

Is it available for adults?

Y

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

Courses are organised in the evenings on weekdays and weekends. They are held either at the training centre of the by the Chamber of Trades and Skilled Crafts, or in secondary schools, or in the National Centre for Continuing Vocational Training (CNFPC).

Main providers

Programmes are organised by the Chamber of Trades and Skilled Crafts

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

The courses in professional theory are specific to each trade. They consist, in principle, of three different modules.
The Chamber of Trades and Skilled Crafts proposes the module that the candidate must follow for the current year.
There is a list with the trades for which preparatory courses are offered. 
In some trades, complementary courses, compulsory and subject to fees, have to be followed.

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

To access these programmes, learners are required to have successfully completed at least EQF level 3 in any trades or occupations. Learners should also have at least one year of work experience to be able to take the final exam.

Assessment of learning outcomes

The master craftsperson programmes is organised in modules and the candidates are free to adapt their training to their own pace. When registering, they choose the modules they would like to follow during the school year.
As the maximum duration to finalise the master craftsperson programmes is six years, the Chamber of Trades and Skilled Crafts proposes course planning that allows regular progression, while preserving a margin of safety

Diplomas/certificates provided

Graduates receive the master craftsperson qualification.

Examples of qualifications

Graduates can settle in the craft industry as self-employed and to train apprentices. The qualification confers the title of master craftsperson in the particular trade.

Progression opportunities for learners after graduation

The master craftsperson qualification does not give any access right for higher education; progression opportunities depend on the certificate gained at secondary level.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([149]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273–3288. http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([150]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6. http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([151]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175. http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification.

General education subjects

Information not available

Key competences

The preparatory courses for the master craftsperson programmes are organised in the following fields:

  • business organisation and management, and applied pedagogy;
  • professional theory and practice.
Application of learning outcomes approach

information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

Secondary

Click on a programme type to see more info
Programme Types

EQF 1

Lower secondary

technical programmes (pre-VET)(ESG),

3 years

ISCED 244

The lower cycle of technical secondary education (ISCED 244, EQF 1) is considered as pre-VET and lasts three years. It comprises the ’orientation programme’ and the ’preparatory programme’, designed for learners who struggle with the regular secondary education curriculum.
EQF level
1
ISCED-P 2011 level

244

Usual entry grade

9 ([90]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

11 ([91]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

12

Usual completion age

14

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults may attend the last year of the lower secondary education programme and then access the technical and technician programme as well as a vocational programme.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

Orientation programmes’ (Les classes inférieures de la voie d’orientation)

In the ‘orientation programme’ classes (three years: 7G, 6G and 5G) of general education (languages, mathematics, human and social sciences, natural sciences) the learners’ knowledge is deepened. The language of instruction is German, except for mathematics and the French language course, which are taught in French. During the second year, language courses (French and German) as well as mathematics are taught on two levels: in a basic course or in an advanced class. The choice of enrolment in one of the two courses is made according to the level of competence of the learner and the orientation advice from the class council. In the last year (5G), English is also taught on two levels. The orientation programme includes workshops in secondary schools that allow the learner to discover several trades and occupations. This is complemented by placements and visits in companies.

The preparatory programme (Les classes inférieures de la voie de preparation) :

The lower grades of the preparatory programme (three years: 7P, 6P and 5P) are for learners who, in one or more disciplines, have not reached the core competence referred to at the end of cycle 4 of primary education. They prepare learners for later transition to the orientation programme or vocational training. German, French, mathematics, general culture, physical education and sports and practical learning in workshops are taught in modules spread over three years of teaching. These allow the learner to progress at his own pace and capitalise on a maximum of modules for the subsequent training envisaged.

These two lower secondary programmes are distinguished by their general orientation, the relative importance of the subjects taught and the teaching methods.

Candidates have the choice between daytime and evening courses.

Main providers

Secondary schools and national school for adults.

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Programmes include workshops that allow learners to discover several trades and occupations. This is complemented by placements and visits in companies.

Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up in mid-2018 ([92]SCL (2018b). Loi du 18 juin 2018 portant: (1) Institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs, and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Young people must have successfully finished primary education.

Candidates should be 17 or more and have a school level allowing access to the last year of lower secondary education.

 

Assessment of learning outcomes

The different functions of assessment are given in detail:

  • formative evaluation: helping the learner to become aware of their strengths and weaknesses while documenting their learning process;
  • certification of the learner's individual knowledge and competences at the end of a learning period;
  • serve as a basis for the learner's guidance.

With a view to these objectives, the quarterly school reports (bulletins trimestriels) are complemented by a report supplement (complément au bulletin).

The quarterly report includes for each taught subject the average (out of 60) of classwork notes and other tests or assignments. The supplement to the report gives information on the progress of the learner in the different areas of competence of the taught subjects, giving an unencrypted assessment. This assessment by skills area offers a differentiated and nuanced view of the learners’ abilities.

At the end of each quarter (or semester), the parents (or the adult learner) receive a report (bulletin) detailing:

  • quarterly (or each semester) marks of the subjects taught;
  • the general quarterly (or each semester) mark;
  • remedial measures for unsatisfactory results.

The report at the end of the school year also includes further details:

  • each subject's annual mark;
  • the general annual mark:
  • promotion decision (positive or not) towards the higher class (at the third year of the lower cycle of technical secondary education).
Diplomas/certificates provided

Not applicable

Examples of qualifications

Not applicable

Progression opportunities for learners after graduation

After successful completion of the lower cycle, learners can choose between technical, vocational and technician programmes.

Destination of graduates

Information not available

Awards through validation of prior learning

N

General education subjects

Y

Languages, humanities and social sciences, mathematics and natural sciences

Key competences

Mathematics, languages

Application of learning outcomes approach

Y

Teaching by competences is applied in the lower classes of technical secondary.

Competences refer to the ability of a learner to implement an organised set of knowledge, skills, and attitudes to provide an adequate response to a problem.

Competences sets describe the knowledge and competences that learners must master in a sustainable way at the end of the two last years of lower cycle of technical secondary education.

For language and mathematics, these sets are divided into two levels: basic set and advanced set.

The set of competences differ from the teaching programme, which describe the contents treated in each domain (maths, French, history…).

Share of learners in this programme type compared with the total number of VET learners

Lower technical secondary education in 2016/17 represented 46.9% ([93]2016/17.) of total learners in technical education (lower, medium and upper level) ([94]MENJE (2018a). Les chiffres clés de l’Éducation nationale : statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in lower technical secondary education has remained stable since 2011/12; at that time 12 915 learners attended lower technical secondary education and 12 760 in 2016/17.

EQF 1

Integration classes

ISCED 244

Integration classes (classe d'insertion) of the lower cycle of technical secondary education, EQF1, ISCED 244
EQF level
1
ISCED-P 2011 level

244

Usual entry grade

9 ([95]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

11 ([96]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

12

Usual completion age

14

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults may attend the last year of the lower secondary education programme and then access the technical and technician programme as well as a vocational programme.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

Information not available

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

Programmes are available for young people and also for adults. For the latter, the completion corresponds to a completion of lower technical secondary education.

Integration classes (classe d'insertion) of the lower cycle of technical secondary education have been created for learners who have a good academic record in their country of origin, but do not have a sufficient command of the languages used for tuition. Based on language skills gaps, learners receive intensive support in learning French or German.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([97]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Information not available

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Information not available

Examples of qualifications

Not applicable

Progression opportunities for learners after graduation

Those who complete the integration classes can continue their studies in one of the following programmes: - vocational programme (CCP), ISCED 354, EQF 4;

- vocational programme (DAP) ISCED 354, EQF 4;

- technician programme (DT) ISCED 354, EQF 4;

- technical programme ISCED 354, EQF 4.

Destination of graduates

Information not available

Awards through validation of prior learning

Information not available

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Teaching by competences is applied in the lower classes of technical secondary.

Competences refer to the ability of a learner to implement an organised set of knowledge, skills, and attitudes to provide an adequate response to a problem.

Competences sets describe the knowledge and competences that learners must master in a sustainable way at the end of the last two years of lower technical secondary education.

For language and mathematics, these sets are divided into two levels: basic set and advanced set.

The set of competences differ from the teaching programme, which describe the contents treated in each domain (maths, French, history…).

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 4

Technical

school-based programmes (ESG),

4 or 5 years,

WBL % varies

ISCED 354

Technical school-based programmes (Diplôme d’enseignement secondaire général) leading to EQF level 4, ISCED 354
EQF level
4
ISCED-P 2011 level

354

Usual entry grade

12 ([98]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

15 ([99]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

18 or 19

Length of a programme (years)

4-5

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

N

This programme is not considered as IVET at national level.

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

The curriculum includes general and technical education; the latter includes practical and theoretical classes. The share of the technical part depends on the grade and on the chosen field and varies from approximately 25 to 65%.

Main providers

Secondary schools

Share of work-based learning provided by schools and companies

Share of work-based learning ([100]Nationally referred to as technical learning.) depends on the grade and on the chosen field and varies from approximately 25 to 65%.

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school
  • in-company practice for some programmes
Main target groups

Programmes are available for young people and some of them also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([101]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires: (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the ‘main-stream’ school system.

Entry requirements for learners (qualification/education level, age)

Information not available

Assessment of learning outcomes

Learner assessment is mainly based on summative evaluations, i.e. periodical tests on contents which have been taught recently. Depending on the subjects, one, two or three tests per term may be organised.

The quarterly report includes for each taught subject the average (out of 60) of classwork notes and other tests or assignments.

At the end of each quarter (or semester), the parents (or the adult learner) receive a report (bulletin) mentioning among others:

  • quarterly (or each semester) marks of the subjects taught;
  • general quarterly (or each semester) mark;
  • remedial measures in case of unsatisfactory results.

The report at the end of the school year also includes further details:

  • each subject's annual mark;
  • general annual mark;
  • promotion decision (positive or not) towards the higher class.
Diplomas/certificates provided

Learners who succeed in technical programmes are awarded a technical secondary school leaving diploma (diplôme de fin d’études secondaires générales). This diploma confers the same rights as that from general secondary education; depending on the strand and section, graduates can enter the labour market or pursue higher education.

Examples of qualifications

Work in the administrative field in private companies or public institutions.

Progression opportunities for learners after graduation

Depending on the strands followed (referred to nationally as ‘divisions’), graduates have the following progression opportunities:

a) administrative and commercial: graduates can pursue higher education in economics, law and accounting. They may work in administration in private companies or public institutions);

b) healthcare and social professions: graduates can pursue higher education in these professions. Graduates in nursing education can continue their education as midwife or medical technical assistant in radiology. Graduates in educator training can continue their studies as a state-certified educator for a period of one year;

c) general technical: graduates can pursue higher education in their specialties: engineering, natural science, architecture, design and sustainable development, computer science, environmental sciences);

d) division of arts: graduates can pursue higher education in the same domain;

e) division of tourism and hospitality: graduates can pursue higher education while preparing for the profession of manager in hospitality.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([102]SC (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([103]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([104]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for technical school-based programmes, all VET diplomas and certificates as well as for master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification. At higher technician certificate level, an ad hoc evaluation committee is set up for each individual asking for recognition of prior learning ([105]SCL (2016b). Loi du 23 juillet 2016 modifiant la loi modifiée du 19 juin 2009 portant organisation de l’enseignement supérieur, fixant les modalités du cycle d’études d’enseignement supérieur aboutissant à la délivrance du brevet de technicien supérieur. Mémorial A 143.
http://www.legilux.public.lu/leg/a/archives/2016/0143/a143.pdf#page=2
).

General education subjects

Y

The curriculum includes general and vocational (nationally referred to as technical) education; the latter includes practical and theoretical classes. The share of the technical part depends on the grade and on the chosen field and varies from approximately 25 to 65%.

Key competences

Information not available

Application of learning outcomes approach

information not available

Share of learners in this programme type compared with the total number of VET learners

Technical programmes (medium and upper level) represents 48.7% ([106]2016/17.) of all medium and upper secondary technical education ([107]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in technical secondary education (medium and upper levels) has increased since 2011/12. At that time 5 677 learners attended technical secondary education programme, with the number increasing to 7 043 in 2016/17.

EQF 4

Technician programmes (DT),

4 years,

WBL % varies

ISCED 354

Technician programmes (le diplôme de technicien), leading to EQF level 4, ISCED 354
EQF level
4
ISCED-P 2011 level

354

Usual entry grade

12 ([108]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

15 ([109]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

18

Length of a programme (years)

4

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

  
ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

This technician programme is mainly offered as a full-time track (filière de plein exercice), where all training occurs in an education institution and includes a minimum job placement of 12 weeks. The offer of programmes in the concomitant track (learning in school and in an enterprise takes place in parallel throughout the year - filière concomitante) or mixed track (theoretical and practical training in school in the first years and last year with the concomitant track - filière mixte) has been extended since 2015/16.

Main providers
  • Secondary schools
  • Companies/training centres
Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

• practical training at school

• in-company practice

Main target groups

Programmes are available for young people and some of them also for adults.

The mediator for school maintenance, inclusion and integration was set up in mid-2018 ([110]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Orientation towards vocational programmes takes place at the end of third year of lower technical education upon decision of the class council based on the assessment reports of the whole academic year.

Assessment of learning outcomes

Since the entry into force of the 2008 reform, the technician (and also vocational) programmes have been organised into modules. For each module, an assessment framework has been set up. It distinguishes compulsory and optional skills and specifies indicators and minimum standards. At the end of the module, learners take an exam to assess the acquisition of required skills for the module and receive an assessment report (bulletin), which indicates whether the module has been passed (unsuccessful, successful, very successful).

Technician and vocational programmes also foresee integrated projects in the middle (only for vocational programmes leading to the vocational aptitude diploma and the technician programme) and at the end ([111]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
). These integrated projects aim to monitor whether the learner has developed the complex skills needed to solve a real or simulated work situation. An integrated project can be spread over a maximum duration of three days (24 hours) for programmes leading to vocational aptitude diploma and technician programmes. This project allows learners to demonstrate the acquisition of required skills in a professional situation. The intermediary and the final integrated projects are a compulsory module for these programmes.

An interim assessment sheet is drawn up at the end of

1. the second academic year of normal four-year training;

2. the first academic year of normal training of three years.

The assessment is based on the learner's results in the compulsory modules as planned in the curriculum from the start. Neither the placement in companies nor the intermediate project is taken into account.

A final assessment is made at the end of the programmes taking into account compulsory modules followed since the interim assessment. Neither the final integrated project nor the intermediate project is taken into account.

Assessments are successful if the following conditions are met:

For a DT (other training durations):

  • 85% success in compulsory modules ([112]Compulsory modules comprise fundamental and complementary modules.);
  • 85% success in compulsory vocational modules;
  • success of all fundamental modules.

For a DT (other training duration of training: one year). For other training periods:

  • 90% success in the compulsory modules of the last two years of training;
  • 90% success of compulsory vocational modules;
  • success of all fundamental modules.
Diplomas/certificates provided

The technician diploma certifies that the holder is competent to perform the trade/profession in question. It differs from the programme leading to the vocational aptitude diploma (DAP) ([113]Diplôme d’aptitude professionnelle (DAP).) by in-depth and diversified competences as well as in-depth general education.

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Technician programme graduates may progress to the third year of the general upper secondary programme or follow a one-year optional preparatory module allowing them to enter tertiary education.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([114]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([115]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([116]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification.

General education subjects

Y

In comparison to the vocational DAP programme, the technician programme offers more in-depth general education

Key competences

Information not available

Application of learning outcomes approach

Y

The major VET reform of 2008 ([117]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) was implemented between 2010/11 and 2013/14. Among the key principles of the reform is also that teaching by subject is replaced with teaching by units and modules. Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Share of learners in this programme type compared with the total number of VET learners

In 2016/17 the number of learners following technician programmes (medium and upper level) was 24.2% ([118]2016/17) of all learners following medium and upper secondary technical education ([119]MENJE (2018a). Les chiffres clés de l’Éducation nationale : statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).The total number of learners in technician programmes (medium and upper level) has slightly increased since 2011/12. At that time 3 378 learners attended technical secondary education programmes, with the number increasing to 3 504 in 2016/17.

EQF 3

Vocational programmes (DAP),

3 years,

WBL % varies

ISCED 353

Vocational programmes leading to a vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) leading to EQF level 3, ISCED 353.
EQF level
3
ISCED-P 2011 level

353

Usual entry grade

12 ([120]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

14 ([121]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

17

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults (those 18 years old and above), having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to the vocational aptitude diploma DAP ([122]Vocational capacity certificate (certificat de capacité professionnelle, CCP).). This is available both to job holders and seekers registered at the public employment service. Upon proof of certain work experience, a dedicated committee may guide the adult learner to a suitable grade. The committee includes representatives of the education ministry, Vocational Training Service, labour ministry, guidance service of the employment service, Chamber of Commerce, Chamber of Trades and Skilled Crafts, Chamber of Agriculture, and Chamber of Employees.

Theory training takes place in a technical secondary school or at the national continuing vocational training centre. The practical part is apprenticeship in an enterprise. Adult apprentices receive allowances equal to the minimum wage for unskilled workers (EUR 1 922.96, 1 January 2016) as defined in a 2010 regulation ([123]SCL (2010c). Règlement grand-ducal du 17 décembre 2010 portant organisation de l’apprentissage pour adultes. Mémorial A 245, 4075-4085.
http://www.legilux.public.lu/leg/a/archives/2010/0240/a240.pdf#page=4
).

The 2008 reform introduced a modular system for apprenticeship, which guarantees the validity of any module acquired during initial training for a certain period, aiding access to lifelong learning.

Vocational programmes for adults: evening classes

Within vocational programmes, employed adults can attend the first year a vocational aptitude diploma (DAP) as administrative and commercial agent. The theoretical part is provided through evening classes in a technical secondary school or in the national continuing vocational training centre. The practical part is acquired through full-time employment in a company. After the first year DAP evening class, adults can continue the second and third year DAP classes under an adult apprenticeship contract.

Vocational programmes for adults: on-the-job training

The nursing assistant vocational aptitude diploma can be obtained through on-the-job training. This training is suitable for those with some work experience in the care sector, who have not had the opportunity to undertake IVET. The three-year training course leads to a nursing assistant DAP. Applicants must fulfil admission criteria such as professional experience of minimum 2 500 hours in the care sector, an employment contract (minimum 50% part-time) and the agreement of their employer.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)
  • school-based learning;
  • work practice (practical training at school and in-company practice);
  • apprenticeships.

DAP Vocational programmes can be followed in one of three different tracks:

a) the concomitant track (filière concomitante), where learning in school and in an enterprise takes place in parallel throughout the apprenticeship. Depending on the profession, the two parts can be organised as day-release (such as two days per week in school and three days in an enterprise) or block-release (for example, nine weeks at school and nine weeks in enterprise); the allocated time may also vary depending on the profession;

b) the mixed track (filière mixte) which is suitable for some professions. This programme offers theoretical and practical training in school in the first year. After successful completion of the school-based part, training is continued in line with the concomitant track;

c) the full-time track (filière de plein exercice), where all training occurs in an educational institution, with 12 weeks of practical training or more within an apprenticeship or internship contract.

The shares of general education, VET theory and practice in vocational programme curricula vary by trade. Vocational learning ratios (practical training in companies and in vocational training school) for each trade/profession are defined by the education ministry on the advice of professional chambers.

Main providers

Technical secondary schools

Share of work-based learning provided by schools and companies

Varies

Work-based learning type (workshops at schools, in-company training / apprenticeships)

• practical training at school

• in-company practice

Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([124]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaire; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Guidance towards vocational programmes takes place at the end of the last year of lower technical education upon decision of the class council based on the assessment reports of the whole academic year.

Except for admission criteria, there are no differences between apprenticeships for adults and young people. Those aged 18 and above, having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to DAP.

Assessment of learning outcomes

Since the entry into force of the 2008 reform, the technician (also vocational and technical) programmes have been organised into modules. For each module, an assessment framework has been set up. It distinguishes compulsory and optional skills and specifies indicators and minimum standards. At the end of the module, learners take an exam to assess the acquisition of required skills for the module and receive an assessment report (bulletin), which indicates whether the module has been passed (unsuccessful, successful, very successful).

Vocational and technician programmes also foresee integrated projects in the middle (only for vocational programme leading to the vocational aptitude diploma and the technician programme) and at the end ([125]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
). These integrated projects aim to monitor whether the learner has developed the complex skills needed to solve a real or simulated work situation. An integrated project can be spread over a maximum duration of three days (24 hours) for programmes leading to vocational aptitude diploma and technician programmes. This project allows learners to demonstrate the acquisition of required skills in a professional situation. The intermediary and the final integrated projects are a compulsory module for these programmes.

An interim assessment sheet is drawn up at the end of

1. the second academic year of normal four-year training;

2. the first academic year of normal training of three years.

The assessment is based on the learner's results in the compulsory modules as planned in the curriculum from the start. Neither the placement in companies nor the intermediate project is taken into account.

A final assessment is made at the end of the programmes taking into account compulsory modules followed since the interim assessment. Neither the final integrated project nor the intermediate project is taken into account.

Assessments are successful if the following conditions are met:

For a DAP (other training durations):

  • 85% success in compulsory modules ([126]Compulsory modules comprise fundamental and complementary modules.);
  • 85% success in compulsory vocational modules;
  • success in all fundamental modules.

For DAP (other training duration of training: one year). For other training periods:

  • 90% success in the compulsory modules of the last two years of training;
  • 90% success in compulsory vocational modules;
  • success in all fundamental modules.
Diplomas/certificates provided

Graduates receive the vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP). This diploma certifies that the holder has the skills to perform the trade/profession in question as a skilled worker on the labour market. DAP graduates may also progress to the third year of a technician programme in the same field of study, the third year of the technical programme, or enter a master craftsperson programme. Subject to completing supplementary preparatory modules they can also pursue higher technical studies (études techniques supérieures, ISCED 550 or 650).

Examples of qualifications

Hairdresser, assistant nurse, administrative and commercial agent, butcher, bricklayer, architectural drafter, aircraft mechanic.

Progression opportunities for learners after graduation

DAP graduates may progress to the third year of a technician programme in the same field of study, the third year of the technical programme, or enter a master craftsperson programme. Subject to completing supplementary preparatory modules they can also pursue higher technical studies (études techniques supérieures, ISCED 550 or 650).

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([127]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([128]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([129]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification.

General education subjects

Y

The general education for the DAP programme includes a module on citizenship education as well as French or German. In comparison to the curricular of the CCP programme, credit units and modules are more detailed and extensive.

Key competences

Y

The general education for the DAP programme includes a module on citizenship education as well as French or German.

Application of learning outcomes approach

Y

The major VET reform of 2008 ([130]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) was implemented between 2010/11 and 2013/14. Among the key principles of the reform is that teaching by subject is replaced with teaching by units and modules. Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Share of learners in this programme type compared with the total number of VET learners

Vocational programmes (medium and upper level) DAP and CCP are 27.1% ([131]2016/17.) of medium and upper secondary technical education ([132]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in vocational programmes (medium and upper level) has decreased since 2011/12. At that time 4 360 learners attended technical secondary education programme, with the number decreasing to 3 914 in 2016/17.

EQF 2

Vocational programmes (CCP),

3 years,

WBL % varies

ISCED 353

Vocational programmes leading to a vocational capacity certificate (certificat de capacité professionnelle, CCP) leading to EQF level 2, ISCED 353
EQF level
2
ISCED-P 2011 level

353

Usual entry grade

12 ([133]Counting of grades starts from age 4 when children enter pre-school, which is the first grade.)

Usual completion grade

14 ([134]Counting of grades starts from age 4 when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

17

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults (18 years old and above) having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to CCP. This is available both to job holders and seekers registered at the public employment service. Upon proof of certain work experience, a dedicated committee may guide the adult learner to a suitable grade. The committee includes representatives of the education ministry, Vocational Training Service, labour ministry, guidance service of the employment service, Chamber of Commerce, Chamber of Trades and Skilled Crafts, Chamber of Agriculture, and Chamber of Employees.

Theory training takes place in a technical secondary school or at the national continuing vocational training centre. The practical part is apprenticeship in an enterprise. Adult apprentices receive allowances equal to the minimum wage for unskilled workers (EUR 1 922.96, 1 January 2016) as defined in a 2010 regulation ([135]SCL (2010c). Règlement grand-ducal du 17 décembre 2010 portant organisation de l’apprentissage pour adultes. Mémorial A 245, 4075-4085.
http://www.legilux.public.lu/leg/a/archives/2010/0240/a240.pdf#page=4
).

The 2008 reform introduced a modular system for apprenticeship, which guarantees the validity of any module acquired during initial training for a certain period, aiding access to lifelong learning.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)
  • school-based learning;
  • work practice (practical training at school and in-company practice);
  • apprenticeships.

Vocational CCP programmes can be followed in the concomitant track (filière concomitante), where learning in school and in an enterprise takes place in parallel throughout the apprenticeship. Depending on the profession, the two parts can be organised as day-release (such as two days per week in school and three days in an enterprise) or block-release scheme (for example, nine weeks at school and nine weeks in an enterprise); the allocated time may also vary depending on the profession;

The shares of general education, VET theory and practice in vocational programme curricula vary by trade. Vocational learning ratios (practical training in companies and in vocational training school) for each trade/profession are defined by the education ministry on the advice of professional chambers.

Main providers
  • Technical secondary schools
  • Companies
Share of work-based learning provided by schools and companies

Varies

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school
  • in-company practice
Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([136]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Guidance towards vocational programmes takes place at the end of the third year of lower technical education upon decision of the Class Council based on the assessment reports of the whole academic year.

Except for admission criteria, there are no differences between apprenticeships for adults and young people. Those 18 years old and above, having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to CCP.

Assessment of learning outcomes

Since the entry into force of the 2008 reform, the technician (also vocational and technical) programmes have been organised into modules. For each module, an assessment framework has been set up. It distinguishes compulsory and optional skills and specifies indicators and minimum standards. At the end of the module, learners take an exam to assess the acquisition of required skills for the module and receive an assessment report (bulletin), which indicates whether the module has been passed (unsuccessful, successful, very successful).

CCP also foresee integrated projects at the end of the programme ([137]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
). These integrated projects aim to monitor whether the learner has developed the complex skills needed to solve a real or simulated work situation. An integrated project can be spread over a maximum duration of three days (24 hours) for programmes leading to vocational aptitude diploma and technician programmes. For programmes leading to a vocational capacity certificate, the integrated project is spread over a maximum duration of two days. This project allows learners to demonstrate the acquisition of required skills in a professional situation. The intermediary and the final integrated projects are a compulsory module for these programmes.

An interim assessment sheet is drawn up at the end of

  1. the second academic year of normal four-year training;
  2. the first academic year of normal training of three years.

The assessment is based on the learner's results in the compulsory modules as planned in the curriculum from the start. Neither the placement in companies nor the intermediate project is taken into account.

A final assessment is made at the end of the programmes taking into account compulsory modules followed since the interim assessment. Neither the final integrated project nor the intermediate project is taken into account.

Assessments are successful if the following conditions are met, for the CCP: 80% success in compulsory modules.

Diplomas/certificates provided

This apprenticeship programme prepares learners for the labour market and leads to the vocational capacity certificate (certificat de capacité professionnelle, CCP). This certificate attests that the holder has the social and basic practical skills for a trade/profession as a semi-skilled worker. After two years of working experience in this trade/profession, the holder is considered a skilled worker.

Examples of qualifications

Automotive mechanic assistant, florist assistant, gardener assistant, plasterer, sales assistant, hairdresser (at a lower level than if acquired over the DAP programme).

Progression opportunities for learners after graduation

This programme prepares learners for the labour market and leads to the vocational capacity certificate (certificat de capacité professionnelle, CCP). It is designed for learners with learning difficulties who cannot access studies leading to a vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) or a technician diploma (diplôme de technician, DT). This certificate attests that the holder has the social and basic practical skills for a trade/profession as a semi-skilled worker. After two years of working experience in this trade/profession, the holder is considered a skilled worker. Learners graduating from CCP can progress to the second year of the DAP programme in the same field. By decision of the class council, the learner can even be admitted to the last year of the DAP programme in the same field ([138]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
).

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([139]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([140]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([141]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification. At higher technician certificate level, an ad hoc evaluation committee is set up for each individual asking for recognition of prior learning ([142]SCL (2016b). Loi du 23 juillet 2016 modifiant la loi modifiée du 19 juin 2009 portant organisation de l’enseignement supérieur, fixant les modalités du cycle d’études d’enseignement supérieur aboutissant à la délivrance du brevet de technicien supérieur. Mémorial A 143.
http://www.legilux.public.lu/leg/a/archives/2016/0143/a143.pdf#page=2
).

General education subjects

Y

Key competences

Y

The general education part includes a module on citizenship education.

Application of learning outcomes approach

Y

The major VET reform of 2008 ([143]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) was implemented between 2010/11 and 2013/14. Among the key principles of the reform is that teaching by subject is replaced with teaching by units and modules. Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Share of learners in this programme type compared with the total number of VET learners

Learners following one of the vocational programmes DAP and CCP (medium and upper level) are 27.1% ([144]2016/17.) of all medium and upper secondary technical education learners ([145]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in vocational programmes (medium and upper level) has decreased since 2011/12. At that time 4 360 learners attended technical secondary education programme, with the number decreasing to 3 914 in 2016/17.

VET available to adults (formal and non-formal)

Click on a programme type to see more info
Programme Types

Optional preparatory module

Optional preparatory module - Modules préparatoires aux études techniques supérieures
EQF level
Not applicable
ISCED-P 2011 level

Not applicable

Usual entry grade

14 or 15 ([146]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

15 or 16 ([147]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

18 or 19

Usual completion age

Not applicable

Length of a programme (years)

Not applicable

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Information not available

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

- school-based learning (English, German, French and Maths)

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([148]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Learners must have graduated from a technician programme or hold a vocational aptitude diploma (DAP) to enter these optional preparatory modules.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

In order to certify access to higher technical studies in the corresponding specialty, learners must have passed all the preparatory modules in a language (German, French or English) and all the preparatory modules in mathematics as described in the timetable of the curricula concerned.

Examples of qualifications

Not applicable

Progression opportunities for learners after graduation

Successful completion of the optional preparatory modules provides the graduates access to tertiary programmes.

Destination of graduates

Information not available

Awards through validation of prior learning

Information not available

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available.