Brexit Disclaimer
This website as well as the publications and online tools accessible via this website may contain UK data and analysis based on research conducted before the United Kingdom’s exit from the European Union on 31 January 2020. EU averages or other statistical parameters including the UK reflect the situation in the European Union before 31 January 2020 and should not be considered as representative of the situation in the EU thereafter. Any data or information pertaining to the UK will be gradually phased out from Cedefop’s website, publications and online tools, as ongoing research projects with the United Kingdom’s participation are concluded. Data coming from UK were collected, processed and published before its withdrawal from the EU. Therefore, EU averages contain UK related data up to 2019.

General themes

The main features of the French VET system are:

  • all IVET qualifications can be obtained either in school-based VET or through an apprenticeship, or by validation of informal and non-formal learning;
  • early leaving in education and training is low and has been below the national target in the last five years;
  • in 2018, one third of all upper secondary learners were following vocational programmes;
  • there are more VET learners in post-secondary VET and their number is on the rise; the share of learners in the short cycle of upper secondary VET is decreasing ([1]Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques, 2018 [Benchmarks and statistics, 2018], pp. 253, 259.
    http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf
    ).

Distinctive features:

Right to education The State ensures the principles of equal opportunities and the right to education. It has the obligation to organise public education that is free of charge and secular.

Role of the social partners The social partners have an essential role in regulatory, political and financial aspects of lifelong learning programmes. The inter-professional agreements they sign were the basis for the introduction of reforms up to 2018, and are generally reflected in legislative and regulatory documents. Social partners also manage different bodies that fund apprenticeship and vocational training schemes for small companies, as well as the unemployment insurance system for job-seekers.

Obligation to contribute financially to CVET French CVET is distinguished by the existence of compulsory contributions allocated to a particular purpose, reflecting the desire to encourage companies to train their staff. The rate is set by law, but some professional branches have applied rates above the legal minimum.

Recognition of ‘individual rights’ to training Another distinctive feature is the recognition of ‘individual rights’ to training, designed to promote social progress and reduce inequalities in access to training. The best known are the recently introduced personal training account (compte personnel de formation, CPF) and the individual training leave named ‘CPF for career transition’ (CPF de transition). The purpose of the CPF is to support the use of an ‘individual right’ scheme, by making it more accessible to all (employed and unemployed) and more portable from one company to another.

Decentralisation / leadership role of regions The law of 2014 brought to a conclusion to the process of decentralisation. It gave regions full authority over vocational training, career advice and coordinating job support policies. Regions develop training policies adapted to their needs and implement them within regional public training (SPRF) and guidance (SPRO) services. Regions are now able to define and manage territorial public policies and can articulate their strategies on VET and economic developments. Since 2019 the Regions are no longer competent for the management of training in apprenticeship provision.

Foster key competences The common set of knowledge, competences and culture was (re)designed in 2015 to ensure the acquisition of key competences in compulsory education (6-16 years) and help learners succeed in VET. The new setting entered into force in 2016-17. It includes personalised support to students throughout their education path.

Strengthen the use of digital technology in education In 2015 France established a three-year digital plan for education to pilot new forms of teaching and learning. The aim is to mainstream digital technology in primary and lower secondary education by providing technical resources, teacher training and funding.

Ease career transition The main aim of the new career guidance service (conseil en évolution professionnelle, CEP) is to offer the employed and unemployed support for personal career transitions and suitable training. This requires coordinated actions among national and regional actors, and active social partner involvement. The service is linked to the personal training account (CPF).

Developing quality processes in CVET According to 2015 legislation, as of 2016 the main CVET funding bodies must ensure the quality of the training they finance, based on predefined criteria. The 2018 reform plans for a new quality framework to apply from 2021 onwards.

Facilitate access to training The active population in the public and private sectors has online access to information related to their personal training account (CPF). Each individual’s rights are entitled in Euro and, by the end of 2019, a digital application will make it easier for beneficiaries to enrol directly in training courses.

Upskilling low-qualified youth and unemployed

The Investment in skills plan (PIC) aims at training and supporting the access to employment of one million young people and one million job seekers. It is funded up to EUR 15 billion for the period 2017-22. The plan links skills needs analysis and innovation with the provision of new training paths.

Population in 2018: 66 926 166 ([2]NB: Data for population as of 1 January; break in series; provisional in 2018. Source: Eurostat, tps00001 [extracted 16.5.2019].)

Population increased by 2% since 2013 ([3]NB: Data for population as of 1 January; break in series; provisional in 2018. Source: Eurostat, tps00001 [extracted 16.5.2019].). This is mainly due to natural growth (France has one of the highest fertility rates in the EU) as well as to positive net migration.

In 2014, there were 6 million immigrants living in France (9.1% of the population), of whom 43.8% (2.61 million) were from Africa. The proportion of immigrants from Europe remains large, though falling: it was 36.1% in 2014, as compared with 50% in 1990. 14.5% of France’s immigrants are from Asia ([4]Insee - Charts of the French economy - 2018 edition:
https://www.insee.fr/fr/statistiques/3353488
).

As people live longer, France’s population is ageing.

The old-age dependency ratio is expected to increase from 29 in 2015 to 43 in 2060 ([5]Old-age-dependency ratio is defined as the ratio between the number of persons aged 65 and more over the number of working-age persons (15-64). The value is expressed per 100 persons of working age (15-64).).

 

Population forecast by age group and old-age-dependency ratio

Source: Eurostat, proj_15ndbims [extracted 16.5.2019].

 

According to national statistics, since 1980, the number of people aged 60 or more has grown from 17% to 25.9%, and their proportion in the French population as a whole is almost the same as that of young people aged under 20 (respectively 24.1% and 25.9%) ([6]Insee - Tableaux de l’économie française, édition 2018 [Charts of the French economy, 2018 edition]:
https://www.insee.fr/fr/statistiques/3353488
).

Most companies are very small: 72% have no employees and 23% have between one and nine employees ([7]Insee - Tableaux de l’économie française, édition 2018 [Charts of the French economy, 2018 edition]:
https://www.insee.fr/fr/statistiques/3353488
).

The economy depends primarily on the tertiary sector. The proportion of the different sectors in terms of gross added value generated in 2016 is:

  • services (commercial and non-commercial) (77.3%), with main branches of activities:
    • real estate (13.2%);
    • wholesale and retail trade (17.6%);
    • non-market services (22.7%);
  • industry (14.1%);
  • construction (5.5%);
  • agriculture (1.6%).

In terms of number of enterprises per sector ([8]Of a total of 4 365 347 enterprises listed in 2016; excluding agriculture and non-commercial activities.):

  • wholesale and retail trade (19.26%);
  • ‘professional, scientific and technical activities and administrative and support service activities’ (17.79%);
  • construction (13.49%);
  • ’public administration, education, human health and social work activities’ (13.79%).

Information not available

In 2018 total unemployment ([9]Percentage of active population, aged 25 to 74.) in France was 7.8% (compared with 6% in the EU-28), marking an increase of 1.7 percentage points since 2008 ([10]Eurostat table une_rt_a [extracted 20.5.2019].).

 

Unemployment rate (aged 15-24 and 25-64) by education attainment level in 2008-18

NB: Data based on ISCED 2011; breaks in time series.
ISCED 0-2 = less than primary, primary and lower secondary education. ISCED 3-4 = upper secondary and post-secondary non-tertiary. Education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_urgaed [extracted 16.5.2019].

 

The economic crisis had less impact on the evolution of unemployment rates of those with medium-level qualifications (including most VET graduates) and with high-level qualifications than for those with low qualifications. However, the unemployment rate of people with medium-level qualifications, including most VET graduates (ISCED levels 3 and 4) remains higher than in the pre-crisis years.

The unemployment rate of young people (15-24 years old) with low- and medium-level qualifications increased sharply at the beginning of the economic crisis and is still almost three times higher than the general working population.

The employment rate of 20 to 34 year-old VET graduates has slightly increased from 73.6% in 2014 to 74% in 2018 ([11]Eurostat table edat_lfse_24 [extracted on 16.5.2019].).

 

Employment rate of VET graduates (20 to 34 years old, ISCED levels 3 and 4)

NB: Data based on ISCED 2011; breaks in time series.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
Source: Eurostat, edat_lfse_24 [extracted 16.5.2019].

 

The increase in employment rate of 20-34 year-old VET graduates in 2014-18 (+0.4pp) was the same as the increase in employment of all 20-34 year olds (+0.4pp) in the same period in France ([12]NB: Data based on ISCED 2011; breaks in time series. ISCED 3-4 = upper secondary and post-secondary non-tertiary education. Eurostat, edat_lfse_24 [extracted 16.5.2019].).

For more information about the external drivers influencing VET developments in France please see the case study from Cedefop's changing nature and role of VET in Europe project [12a]Cedefop (2018). The changing nature and role of vocational education and training in Europe. Volume 3: the responsiveness of European VET systems to external change (1995-2015). Case study focusing in France. Cedefop research paper; No 67. https://www.cedefop.europa.eu/files/france_cedefop_changing_nature_of_vet_-_case_study.pdf

In 2018, most people in the age group 25-64 in France have a medium-level qualification (42.3%, against 45.7% in the EU) while the share of those with high-level qualifications (36.8%) is higher than the EU average (32.2%). The share of people with no or low-level qualifications (20.6%) is below the EU-28 average (21.8%) but is within the ten highest in the EU.

 

Population (aged 25 to 64) by highest education level attained in 2018

NB: Data based on ISCED 2011; Low reliability for ‘No response’ in Czechia, Iceland, Latvia, and Poland.
ISCED 0-2 = less than primary, primary and lower secondary education.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_pgaed [extracted 16.5.2019].

For more information about VET in higher education in France please see the case study from Cedefop's changing nature and role of VET in Europe project [12b]Cedefop (2019). The changing nature and role of vocational education and training in Europe. Volume 6: vocationally oriented education and training at higher education level. Expansion and diversification in European countries. Case study focusing on France. Cedefop research paper; No 70. https://www.cedefop.europa.eu/files/france_cedefop_changing_nature_of_vet_-_case_study_0.pdf

Share of learners in VET by level in 2017

lower secondary

upper secondary

post-secondary

Not applicable

39.9%

57.1%

Source: Eurostat, educ_uoe_enrs01, educ_uoe_enrs04 and educ_uoe_enrs07 [Extracted on 16.5.2019]

The share of learners in upper secondary VET in 2017 decreased by 3.1pp compared to 2013, while the share of VET learners in post-secondary increased by 5.8pp in the same period.

 

Share of initial VET learners from total learners at upper secondary level (ISCED level 3), 2017

NB: Data based on ISCED 2011.
Source: Eurostat, educ_uoe_enrs04 [extracted 16.5.2019].

 

The rates of access to training for men and women are similar. In the academic years 2014-16, there were more men than women among those who left initial education with a vocational qualification (such as CAP/EQF level 3, a vocational baccalaureate/EQF level 4 or BTS, DUT /EQF level 5) (see figure below)

 

Breakdown of young people at the end of initial training according to their highest diploma

Source: Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques, p. 253 ([13]http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf).

 

The share of early leavers from education and training has decreased by 2.9 percentage points, from 12.4% in 2009 to 8.9% in 2018. It has been below the EU average (10.6%) and the national target set (<9.5%) since 2013.

 

Early leavers from education and training in 2009-18

NB: Share of the population aged 18 to 24 with at most lower secondary education and not in further education or training; break in series.
Source: Eurostat, edat_lfse_14 [extracted 16.5.2019] and European Commission: https://ec.europa.eu/info/2018-european-semester-national-reform-programmes-and-stability-convergence-programmes_en [accessed 14.11.2018].

 

National authorities have an obligation to support young people aged 16 to 18 without a diploma and unemployed. There is a training scheme, not leading to qualifications, to support reintegration of early leavers from education and training. The service includes for all beneficiaries:

  • a personalised interview to assess needs, skills and level of education;
  • a training offer and personalised support (a tutor from national education during the training course).

Between 2010 and 2017, the number of people leaving initial training without a diploma was reduced by 42.85% ([14]https://www.education.gouv.fr/cid55632/la-lutte-contre-le-decrochage-scolaire.html%20-%20Les_chiffres_du_decrochage).

Teaching and administrative staff in upper secondary schools involved in the initiative to reduce dropouts from education and training (Mission de lutte contre le décrochage, MLCD) may follow relevant training to acquire the necessary skills (MLCD certificate) ([15]http://eduscol.education.fr/cid55115/mission-de-lutte-contre-le-decrochage.html; Decree 2017-791 of 5 May 2017:
https://www.legifrance.gouv.fr/eli/decret/2017/5/5/MENE1710930D/jo/texte/fr
).

The national youth guarantee scheme (garantie jeunes) targets young people with low education and/or disadvantaged socio-economic background. After a pilot phase begun in 2013, it was made more generally available in 2017. Between October 2013 and July 2018, 229 000 young people benefited from the scheme ([16]DARES (2019). La Garantie jeunes: quels jeunes et quel bilan après cinq and ? [Youth guarantee: assessment after five years]. DARES analyses series, April 2019, No 018.
https://dares.travail-emploi.gouv.fr/IMG/pdf/dares_analyses_garantie_jeunes_bilan.pdf
).

The Investment in skills plan (PIC) aims at training and supporting the access to employment of one million of young people, including dropouts, by 2022.

Lifelong learning (formation tout au long de la vie) is a national obligation of the State. It covers both initial education and training (general, technological/professional and vocational streams, including apprenticeship) as well as continuing vocational training for adults and young people already engaged in working life ([17]http://www.education.gouv.fr/cid217/la-formation-tout-au-long-de-la-vie.html).

 

Participation in lifelong learning in 2014-18

NB: Share of adult population aged 25 to 64 participating in education and training; break in series.
Source: Eurostat, trng_lfse_01 [extracted 16.5.2019].

 

Participation in lifelong learning has been steady since 2014, slightly increasing by 0.2 percentage points (from 18.4% in 2014 to 18.6% in 2018); it is higher than the EU 28 average (10.8% and 11.1% respectively)

According to national statistics, in 2015-16 73% of people aged 14-22 were in education, i.e. a little more than 15 million learners in total ([18]Insee - Bilan formation-emploi 2018 [Assessment of training and employment 2018]:
https://www.insee.fr/fr/statistiques/2526273
). In 2016, one in two employees participated in a training programme.

 

Breakdown of young people at the end of initial training according to their highest diploma

Source: Repères et références statistiques 2018, Ministry of National Education, Higher Education and Research, p. 253 ([19]http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf)

 

Share of learners in vocational and vocationally-oriented programmes either in school-based education or in apprenticeship in 2014-16:

  • in VET EQF level 3 programmes (CAP, BEP): 11%
  • in VET EQF level 4 programmes (vocational baccalaureate): 17%
  • in EQF level 4 technological programmes (vocational-oriented): 6%
  • in EQF level 5 post-secondary non-university programmes (DUT, BTS etc.): 13%

National statistics make no differentiation between academic and professional bachelor and master degrees.

The following levels are included in initial education and training:

  • pre-primary (ISCED level 0);
  • primary (compulsory) education for children aged 6-11, (ISCED level 1);
  • lower secondary education for learners aged 12-16 in collèges (ISCED level 2);
  • upper secondary education for learners aged 16-18 (ISCED level 3);
  • tertiary (ISCED level 5) and higher education (ISCED levels 6, 7 and 8)

Pre-primary education is optional, but in practice is attended by all children aged three to six.

Primary education is the first part of compulsory education (five years, learners aged 6 to 11); lower secondary marks the end of compulsory education (learners aged 12 - 16) and is delivered in junior high schools (collèges).

In 2017, 5 629 800 pupils were in public and private secondary institutions in mainland France and in the overseas territories ([20]Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques, 2018 [Benchmark and statistics, 2018], p.86.
http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf
). In initial education, each pathway prepares students for an exam to obtain a qualification. Altogether, there are around 15 000 IVET qualifications referenced in the national register of vocational qualifications (RNCP) ([21]http://www.intercariforef.org/formations/recherche-formations.html;
http://www.cncp.gouv.fr/sites/default/files/media/projet_ra2017ga2.pdf
) and more than 500 000 CVET training programmes referenced by information centres ([22]Database managed by a network of regional information centers:
http://www.intercariforef.org/formations/recherche-formations.html
).

Lower secondary offers general education, but vocational courses preparing students to enter an apprenticeship are also offered. At the end of the cycle, learners pass an exam to obtain the end of lower secondary education certificate (diplôme national du brevet) which is not essential to access upper secondary.

In upper secondary (three years, learners aged 16-18) learners may choose between

  • the general path leading to the end of secondary education general exam (and Baccalauréat degree), opening up access to higher education and tertiary level studies;
  • the technological path leading to the technological baccalaureate which opens up the possibility to follow VET studies offered at EQF levels 5 or 6;
  • the vocational path that includes a two-year path to obtain a professional skills certificate at EQF level 3 (CAP) and a three-year path leading to a vocational baccalaureate at EQF level 4 (BAC-pro). Those with a CAP may also continue in one-year school-based programme to receive the applied arts certificate (EQF level 4).

In tertiary non-academic education there are two-year VET programmes

  • in university technology institutes (IUTs) attached to universities to prepare an undergraduate certificate of technology (DUT, EQF level 5);
  • in an advanced technician section in vocational high schools to prepare an advanced technician certificate (BTS).

Professional bachelor (EQF 6) and master (EQF 7) programmes are also offered in parallel to higher education academic studies (EQF levels 6 to 8); the latter are delivered in universities and in public or private higher colleges of excellence (grandes écoles).

In Initial VET the following learning options are available:

  • full-time education in VET schools;
  • work-based learning in school-based VET; which length varies depending on the type and education level of the programme:
    • 50% in EQF 4 upper secondary VET programmes (BAC-pro);
    • 30% in EQF 5 VET programmes (DUT, BTS);
    • 10% in EQF 6 professional bachelors;
    • 30% in EQF 7 professional masters
  • work-based learning delivered as apprenticeship. This type of learning is delivered partly in apprenticeship training centres (CFA) and partly in companies under an apprenticeship (employment) contract.
    • the share of work-based learning (in-company practical training) is 67%.

Types of learning in school-based programmes:

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.

Learning forms in continuing VET:

Lifelong learning (formation tout au long de la vie) is a national obligation. It includes both initial education and training (general, technological and vocational streams, including apprenticeship) offered from upper secondary to higher education levels; and continuing vocational training for adults and young people already engaged in working life ([23]http://www.education.gouv.fr/cid217/la-formation-tout-au-long-de-la-vie.html). Under this concept, vocational education and training is offered as:

  • initial vocational training for young people, including apprenticeship; it is offered from upper secondary to tertiary education enabling young people to obtain qualifications for the labour market;
  • continuing vocational training for young people who have left or completed initial education ([24]Initial education includes pre-elementary to higher education levels.) and to adult employees, job seekers, civil servants, self-employed workers and business owners. It promotes and supports labour market (re)integration, encourages skills and career development through acquiring new qualifications and contributes to economic and cultural development and social advancement;
  • a scheme that allows adults to gain vocational qualifications through knowledge and skills acquired at work ([25]http://skillpass-game.com/sites/default/files/doc/assembleenationale.pdf).

Since 2009 ([26]Act No 2009-1437 of 24 November 2009 on lifelong career guidance and vocational training:
http://www.legifrance.gouv.fr/affichTexte.do;jsessionid=?cidTexte=JORFTEXT000021312490
), every working person has a right to a professional qualification. Under this right, the (self-) employed and job seekers may choose a training course that enables them to progress in a career by at least one level, by acquiring a qualification corresponding to the short- or medium-term needs of the economy. This qualification should either be

  • included in the national register of vocational qualifications (RNCP - Répertoire National des Certifications Professionnelles);
  • recognised in the professional sector classifications;
  • a certificate of professional qualifications (CQP) recognised by the branches but not attached to a qualification level.

The legal definition of training action was broadened by the law of September 2018, including position tests, distance learning and on-the-job training (Action de formation en situation de travail, AFEST).

The State is the only body that develops qualifications that can be accessed through initial education. All the qualifications developed by the State can also be accessed via lifelong learning and validation of non-formal and informal learning (VAE- validation des acquis de l'expérience).

Beside formal IVET programmes leading to qualifications issued and recognised by the State, different bodies offer training programmes leading to sectoral vocational qualifications and certificates issued by them.

The methods for accessing different qualifications are flexible. They can be accessed through the initial education system, but also through apprenticeship, continuing vocational training, and validation of non-formal and informal learning ([27]Art L335-5 du Code de l’éducation:
https://www.legifrance.gouv.fr/affichCodeArticle.do?cidTexte=LEGITEXT000006071191&idArticle=LEGIARTI000006524828
). A qualification acquired through continuing vocational training has exactly the same value as one obtained in initial education.

All VET qualifications offered in school-based and classroom VET programmes may be obtained in apprenticeship; in the latter case, practical training spend in a company covers 60 to 75% of the total programme duration.

A major reform of the vocational training system is under way ([28]The 2018 Bill for the freedom to choose one’s professional future:
https://www.legifrance.gouv.fr/affichTexte.do;jsessionid=A6446FA6AF9D1ED55743DC8A12894157.tplgfr36s_2?cidTexte=JORFTEXT000037367660&categorieLien=id
) affecting CVET governance, funding mechanisms, and apprenticeship provision. The 2018 Bill defines for apprenticeship training centres (CFAs) the same obligations and quality standards as those for IVET training centres and a new funding model for CFAs and apprenticeship contracts.

All training providers, including apprenticeship training centres, will have to be quality certified by 2021, as long as the training they offer is financed by public funds and mutual funds.

Since 2018, France Compétences is the new governance and monitoring body responsible for VET implementation and financing ([29]https://travail-emploi.gouv.fr/ministere/acteurs/agences-et-operateurs/a...) that will replace and absorb several national instances ([30]Copanef (National Inter-professional Committee for Employment and Training - Comité paritaire interprofessionnel national pour l'emploi et la formation), Cnefop (National Council for Employment, Vocational training and Guidance - Conseil national de l'emploi, de la formation et de l'orientation professionnelle), FPSPP (Joint Fund for professional career security - Fonds paritaire de sécurisation des parcours professionnels) and CNCP (National Committee on Vocational Qualification - Commission nationale de certification professionnelle).).Gradual implementation is foreseen as of 2019. It will distribute the mutual fund envelopes and ensure the equalisation of apprenticeship funds to skills operators (OPCO) ([31]OPCO - Opérateurs de compétences (former OPCA):
https://travail-emploi.gouv.fr/ministere/acteurs/partenaires/article/opca-organismes-paritaires-collecteurs-agrees
) and the regions. Skills operators will manage two envelopes, the financing of alternance training programmes (apprenticeship contracts and professionalisation contracts) and the financing of the training plan for companies ([32]French employers can organise collective training for their employees. All these training sessions are presented in a specific document, the skill development or training plans.) with less than 50 employees. Full implementation and transition from the old system to the new one is to be completed by 2021 ([33]http://www.cedefop.europa.eu/en/news-and-press/news/refernet-france-reforming-continuing-vocational-training-2018-bill).

Learn more about apprenticeships in the national context from the European database on apprenticeship schemes by Cedefop: http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/apprenticeship-schemes/scheme-fiches

Governance of the French VET system

Vocational training in France is a matter of shared competences between the State, the regions and representatives of the business world ([34]http://media.eduscol.education.fr/file/dossiers/61/5/formation_professionnelle_VF_151615.pdf).

At State-level, initial VET is mainly regulated by the Ministries of Education (upper secondary VET) and Higher Education (tertiary VET). Different ministries develop VET qualifications and nationally valid certificates. Continuing VET is under the remit of the Ministry of Labour ([35]Adapted from Cedefop (2019). Spotlight on VET – 2018 compilation: vocational education and training systems in Europe. Luxembourg: Publications Office.
https://www.cedefop.europa.eu/en/publications-and-resources/publications/4168
).

Initial vocational education and continuing vocational training are managed by different ministries, have different funding sources and even different objectives. There are qualifying requirements for VET teachers and trainers, and various funding IVET schemes.

IVET

Governance of initial VET

Initial education covers all levels of education from pre-primary to higher education. Initial VET is offered from upper secondary to higher education (EQF levels 3 to 7).

The Ministry of Education and other ministries that develop VET qualifications in their remit:

  • develop standards for IVET qualifications in consultation with business representatives;
  • define examination regulations;
  • issue/award VET qualifications and diplomas;
  • offer various types of training in their institutions for school learners and apprentices;
  • recruit, train and pay teachers;
  • monitor quality of training and training delivery (results and resources used).

The Regions are responsible for the planning and coherence of vocational training in their territories, except for apprenticeship provision. They define their policies according to their economic and social priorities, in consultation with the State and the social partners.

Social partners are the main stakeholders systematically involved in VET implementation. They:

  • contribute to the elaboration of VET qualifications;
  • participate in examination boards;
  • offer in-company training;
  • contribute financially to VET provision (technological and vocational training paths) by paying the apprenticeship tax.

In practice, ministerial advisory professional committees are formed with the participation of social partners to plan the revision of VET qualifications in line with labour market needs.

The national commission for collective bargaining (CNNC) issues opinions on draft legislation (laws, decrees, ordinances) for employment policies, guidance, IVET and CVET policies and training actions financed though calls (training plans) organised by the State ([36]Art. L2227-1 of the Labour Code.
https://www.legifrance.gouv.fr/affichCode.do?idArticle=LEGIARTI000019870676&idSectionTA=LEGISCTA000006177940&cidTexte=LEGITEXT000006072050&dateTexte=20121101
).

IVET providers

IVET is offered from upper secondary to tertiary/higher education in public and private establishments. In upper secondary three paths are offered: general, technological and vocational (respectively, teaching staff specialise as upper secondary teacher, technological path teacher and VET teacher).

In 2017, upper secondary VET programmes were running in 1456 schools (lycées professionnels) (834 public and 622 private establishments). Upper secondary VET prepares learners for VET qualifications at EQF level 3 and 4; in an advanced technician section learners may also prepare an advanced technician certificate (BTS) (EQF level 5).

Higher education comprises:

  • universities, public establishments which do not have selection processes;
  • university technology institutes (IUTs) attached to universities offering VET programmes leading to an undergraduate certificate of technology (DUT) at EQF level 5;
  • a non-university sector made up of higher education elite establishments (Grandes Ecoles), which are only accessible via competitive entrance competitions, and preparatory classes for those establishments ([37]Grance ecoles are tertiary education institutions of excellence operating in limited fields (public administration, science and engineering, humanities and business administration). Access to Grandes Ecoles programmes is possible through a competitive and selective admission procedure (upper secondary – Baccalaureate - graduates, pre-selected based on their school profile and grades, must undertake preparatory classes in a two-year programme with eliminatory examinations at the end of each year). Higher education in French is free, but only the State may issue university degrees and diplomas. Private HE institutions must be accredited or State-labelled (for a validity of six years), through the Commission d'évaluation des formations et diplômes de gestion (CEFDG). The State-approved label is a recognition procedure conducted by the Ministry of National Education which gives the diploma the value of a national qualification. The label is granted for a maximum renewable period of six years. Grandes écoles offering programmes leading to business and management qualifications are mainly private institutions managed by professional organisations. A State-approved qualification provides access to the LMD cycle (Licence-Master-Doctorat), whether in France or abroad.).

Reforming upper secondary VET

Reforming the upper secondary vocational path started in May 2018; it is part of the national skills strategy and will be developed in line with the regional development strategy ([38]Cedefop (2019). Spotlight on VET – 2018 compilation: vocational education and training systems in Europe. Luxembourg: Publications Office.
https://www.cedefop.europa.eu/en/publications-and-resources/publications/4168
). The organisation of the vocational baccalaureate will evolve in September 2019. Whatever the specialty, a set of key skills will be common.

54 hours per year are dedicated to the career guidance project for the transition from upper secondary to higher level studies ([39]http://www.education.gouv.fr/cid2604/la-voie-technologique-au-lycee.html#Vers_le_nouveau_baccalaureat_2021). Personalised support focuses on written and oral expression and guidance. It includes:

  • two weeks of orientation dedicated to the discovery of professional sectors;
  • training in higher education;
  • personalised guidance interviews.

A personalised guidance service is in place (reviens te former) ([40]http://reviensteformer.gouv.fr/) for those aged 16-25 with at most an upper secondary baccalaureate but no vocational qualification, wishing to return to education and training to acquire a VET qualification.

CVET

Governance of continuing VET

The vocational training system is managed within the framework of a ‘four-party system‘: the State, the Regions and the social partners (employer representatives and trade unions) contribute to the development and implementation of continuing vocational training and national apprenticeship policy.

The State develops the standards and strategies for vocational training. It guides CVET/apprenticeship policies in order to secure professional careers and access to employment. Three ministries are particularly concerned with continuing vocational training and apprenticeship:

Since 2014, the Regions have been in charge of

  • training specific audiences ([44]People with illiteracy, people with disabilities, prisoners, French people living outside France.) previously under the responsibility of the State;
  • appointing operators to provide professional development advice, as part of the regional public guidance services;
  • organising and financing the regional public service for vocational training ([45]Art. L214-12 à L214-16-2 du Code de l'éducation.).

Social partners have an essential role in regulatory, policy and financial aspects of lifelong learning programmes (IVET and CVET). They:

  • sign inter-professional agreements which are used in shaping reforms and are reflected in legislative and regulatory documents;
  • manage 11 bodies called ‘skills operators’ (OPCOs - Opérateurs de compétences) organised by professional sector. Among their tasks, skills operators can help benefit from mutual funds the SMEs employing fewer than 50 persons, to develop training programmes for their employees (plans de développement des compétences). OPCOs are also responsible for developing apprenticeship and funding the training costs of apprenticeship pathways leading to a qualification.
  • contribute to the development of diplomas by taking part in boards of examiners.

Reforming continuing vocational training

A major reform of the vocational training system is under way. It aims to improve VET attractiveness and responsiveness to the labour market by restructuring its governance, funding mechanisms, and apprenticeship provision.

New governance: the 2018 Law for the freedom to choose one’s professional future ([46]https://www.legifrance.gouv.fr/affichTexte.do;jsessionid=A6446FA6AF9D1ED55743DC8A12894157.tplgfr36s_2?cidTexte=JORFTEXT000037367660&categorieLien=id) established France Competences, a new governance and monitoring body on VET implementation and financing ([47]https://travail-emploi.gouv.fr/ministere/acteurs/agences-et-operateurs/a...). This is a single, four-party public institution operating under the supervision of the Minister in charge of vocational training. France Compétences replaces and absorbs several national bodies on VET implementation and financing ([48]Copanef (National Inter-professional Committee for Employment and Training - Comité paritaire interprofessionnel national pour l'emploi et la formation), Cnefop (National Council for Employment, Vocational training and Guidance - Conseil national de l'emploi, de la formation et de l'orientation professionnelle), FPSPP (Joint Fund for professional career security - Fonds paritaire de sécurisation des parcours professionnels) and CNCP (National Committee on Vocational Qualification - Commission nationale de certification professionnelle).).

France Compétences will distribute the mutual fund envelopes and ensure the equalisation of apprenticeship funds to skills operators (OPCO) ([49]OPCO - Opérateurs de compétences (former OPCA):
https://travail-emploi.gouv.fr/ministere/acteurs/partenaires/article/opca-organismes-paritaires-collecteurs-agrees
) and the regions. Skills operators will manage two envelopes, the financing of alternance training programmes (apprenticeship contracts and professionalisation contracts) and the financing of the training plan for companies ([50]French employers can organise collective training for their employees. All these training sessions are presented in a specific document, the skill development or training plans.) with less than 50 employees.

The activities of France compétences and the new OPCOs start from the first quarter of 2019; full implementation and transition from the old system to the new one is to be completed by 2021 ([51]http://www.cedefop.europa.eu/en/news-and-press/news/refernet-france-reforming-continuing-vocational-training-2018-bill).

The national framework of vocational qualifications (RNCP): the 2018 Bill foresees that, from 2019 onwards, the levels of qualification in the national nomenclature are to be aligned with EQF. Implementing provisions came into force in January 2019 ([52]Decree No 14 of 8 January 2019, implementing provisions of the 2018 Bill (Chapter IV, Article 31).). France Compétences assumes the responsibilities of the national commission for vocational certifications ([53]CNCP - Commission nationale de la certification professionnelle.).

CVET training – main characteristics

Continuing vocational training comprises lifelong learning programmes and training schemes for vulnerable groups. It targets the unemployed and people already engaged in working life (private sector employees, civil servants, self-employed). The aim of CVET is to support workers to adapt more quickly to the changing labour market needs and acquire a (new) VET qualification. There are various routes and progression opportunities while training is offered from a range of VET providers. The type of training programme depends on the status of the beneficiary. A list of available lifelong learning programmes is presented in the table below.

Lifelong learning programmes by target groups, objectives and funding sources

Programme name

Target group

Target qualification

Funding

sources

Professional development contract

Young people

Jobseekers

People on basic

welfare benefits

RNCP registered diploma or qualification 74% other than:

- certificates of vocational qualification (CQP): 11.8%

- Or qualification recognised in the classification of a non- RNCP registered collective agreement: 14.2%

Social partners, employers and State

Skills development plan

Employees

These training initiatives mainly aim to adapt, develop, acquire, maintain or enhance skills.

Mainly employers and social partners

Promotion or transition through apprenticeship (new in 2019)

Mainly employees

This programme lead to a recognised diploma, title or qualification

Mainly social partners, employers

Personal training account with professional transition (new in 2019)

Employees, Jobseekers who have previously held a temporary contract

This programme lead to a recognised diploma, title or qualification

Mainly social partners

Personal training account

Employees, jobseekers, unqualified young people

Notably:

- Courses providing basic

knowledge and skills;

- Courses leading to a RNCP registered qualification or to an

identified part of a vocational

qualification, classified in the list,

for the purpose of acquiring a et of skills;

- CQP;

- work experience accreditation

(VAE) support initiatives

All funding sources: Regions, local job centres, social partners, learners, etc.

Courses funded by the Region

Mainly jobseekers, sometimes employees

Courses leading to and preparing for qualifications, professional development courses 85.4%

Social and professional integration courses 16.6%

Regions, joint funding by State social partners

is possible

Courses funded by local job centers

 

Jobseeker courses for qualifications,

Professional development,

Job adaptation

Regions,

joint funding by

State, social partners

is possible

Source: Appendix to the finance white paper 2018 – Vocational training ([54]http://www.performancepublique.budget.gouv.fr/sites/performance_publique/files/farandole/ressources/2015/pap/pdf/jaunes/jaune2015_formation_professionnelle.pdf).

CVET providers

The training market in France is free. In 2016, 68 000 CVET providers had a turnover of EUR 14.3 billion. Their number and turnover are relatively stable compared to 2015.

 

Breakdown of the number of training providers, learners and annual turnover by status of training providers (%), 2016

Source : Appendix of the draft budget bill – November 2018 ([55]https://www.performance-publique.budget.gouv.fr/sites/performance_publique/files/farandole/ressources/2018/pap/pdf/jaunes/Jaune2018_formation_professionnelle.pdf).

 

Employment policies relevant to VET

A major investment plan for a skills society 2018-22 aims to train one million low-skilled jobseekers. This plan is implemented in the form of national calls for projects and regional skills investment pacts. It follows the 2016 initiative to offer 500 000 additional training places, which mainly involves the employment agency in sponsoring training for jobseekers ([56]https://travail-emploi.gouv.fr/actualites/l-actualite-du-ministere/article/plan-d-investissement-2018-2022-former-2-millions-de-demandeurs-d-emploi).

There are several training schemes targeting the low qualified. They aim to facilitate (re)integration into the labour market, leading or not to a qualification; the most representative are:

  • support scheme for NEET’s ([57]People not in education, employment, or training.) aged 16-18 to reengage in education and training;
  • supporting measures through the national youth guarantee scheme, which is integrated into the investment plan for a skills society 2018-22 and received increased funding;
  • a training scheme for teachers and school staff on strategies/tools to prevent drop outs, leading to a certificate (award);
  • a key competences scheme of tailored training modules to acquire five basic skills ([58]Written comprehension and expression, initiation to a foreign language, mathematics and basic scientific and technological skills, numeracy, the ability to develop knowledge and skills.). The scheme is implemented by the regions and targets mostly jobseekers and young people aged 16-25; it may take place in parallel with a subsidised contract for a training action leading to qualifications;
  • the CléA ([59]http://www.cedefop.europa.eu/cs/news-and-press/news/france-clea-certificate-key-competences-demand-among-jobseekers-and-employees), an inter-professional certificate attesting to proficiency in basic knowledge and vocational skills. The scheme is leading funded certification in CPF ([60]CPF (Compte personnel de formation / personal training account) is an individual right to training for all those entering the working life (the unemployed and employees).) training.

IVET funding

Education funding includes:

  • teaching and training (including in apprenticeships);
  • administration and educational research;
  • catering and lodging, counselling and medical service;
  • transportation, purchase of books and other educational materials.

All funding sources combined, expenses for general, technological and vocational education were estimated, in 2016, at EUR 149.9 billion (State funds 54.6%, 23.8% regional funds, 1.3% household and 8.5 % company funds).

Funding of initial education and training, 2016

Funding category

Share of total funding

Teaching and training

85.3%

Catering and lodging

7.2%

Administration, guidance, transports and other expenses

7.5%

Source: Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques 2018, p. 316 ([61]http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf).

CVET funding

Companies are the main CVET funding source (30.8% of total expenditure, see table below), through their contributions to skills operators (Opérateur de compétences, OPCO) and the apprenticeship tax.

The Regions are the second largest funder (18.7%). The appropriations allocated to training (excluding public officials) by local and regional authorities other than the Regions (departments, municipalities, etc.) account for less than 1%.

State intervention expenditure on CVET/apprenticeship training decreased by 7.1%, along with the expenditure of other administrations or bodies with a public service mission, including Agefiph (association managing the fund for the professional integration of people with disabilities), Unédic ([62]The Unédic (Union nationale interprofessionnelle pour l'emploi dans l'industrie et le commerce / National Professional Union for employment in industry and trade) is managed by social partners. From consultancy to evaluation, to piloting and deployment, management or communication. Unédic implements unemployment insurance through support and sharing expertise services.) and Pôle Emploi.

Individual spending, consisting of individual training purchases, was dynamic (+3.0%).

The expenditure of the State, territorial and hospital public services for the training of their staff, representing 22%, is stable overall. Expenditure by the civil service is down (-4.0%) but expenditure by civil servants in the territorial and hospital sectors is up by 2.3% and 3.1% respectively.

Overall CVET expenditure by main financers

 

2014

(EUR millions)

2015

(EUR millions)

Structure 2015 (%)

Évolution 2015 / 2014 (%)

Companies (excluding direct expenses)

7 992

7 677

30.8 %

-3.9

Unédic/Pôle emploi and other public administrations

2 135

2 104

8.4

-1.5

Regions

4 500

4 647

18.7 %

3.3

State

3 748

3 483

14.0 %

-7.1

Other local authorities

116

113

0.5%

-2.8

Private individual

1 362

1 403

5.6%

3.0

State, territorial and hospital public services

5 481

5 469

22%

-0.2

TOTAL

25 334

24 896

100.0

-1.7

Source : Annex of the draft finance law on vocational training 2018 ([63]https://www.performance-publique.budget.gouv.fr/sites/performance_publique/files/farandole/ressources/2018/pap/pdf/jaunes/Jaune2018_formation_professionnelle.pdf).

In 2017 a major investment plan (2018-22 Plan d’investissement dans les compétences, PIC) aimed at mobilising EUR 57 billion over a five-year period was set up. One of the objectives of this plan is to raise the level of employment by building a skills company: to this end, EUR 15 billion managed by a High Commissioner for Skills and Inclusion through Employment ([64]Haut-commissaire aux compétences et à l’inclusion par l’emploi. See
https://travail-emploi.gouv.fr/grands-dossiers/plan-d-investissement-dans-les-competences/article/le-haut-commissaire-aux-competences-et-a-l-inclusion-par-l-emploi
) are allocated to training actions for skills development targeting mostly long-term jobseekers and young people without qualifications.

Reforming CVT governance and funding mechanisms A major reform of the continuing vocational training system is under way. It aims to improve VET attractiveness and responsiveness to the labour market by restructuring its governance, funding mechanisms, and apprenticeship provision ([65]http://www.cedefop.europa.eu/en/news-and-press/news/refernet-france-reforming-continuing-vocational-training-2018-bill 
).

Since 2018, France Compétences is the new governance and monitoring body on VET implementation and financing ([66]https://travail-emploi.gouv.fr/ministere/agences-et-operateurs/article/france-competences  
). Gradual implementation is foreseen as of 2019. France Compétences replaces and absorbs several national bodies on VET implementation and financing ([67]Copanef (National Inter-professional Committee for Employment and Training - Comité paritaire interprofessionnel national pour l'emploi et la formation), Cnefop (National Council for Employment, Vocational training and Guidance - Conseil national de l'emploi, de la formation et de l'orientation professionnelle), FPSPP (Joint Fund for professional career security - Fonds paritaire de sécurisation des parcours professionnels) and CNCP (National Committee on Vocational Qualification - Commission nationale de certification professionnelle).). It will distribute the mutual fund envelopes and ensure the equalisation of apprenticeship funds to skills operators (OPCO) ([68]OPCO - Opérateurs de compétences (former OPCA):
https://travail-emploi.gouv.fr/ministere/acteurs/partenaires/article/opca-organismes-paritaires-collecteurs-agrees
) and the regions.

Skills operators will manage two envelopes, the financing of alternance training programmes (apprenticeship contracts and professionalisation contracts) and the financing of the training plan for companies ([69]French employers can organise collective training for their employees. All these training sessions are presented in a specific document, the skill development or training plans.) with less than 50 employees.

Full implementation and transition from the old system to the new one is to be completed by 2021 ([70]http://www.cedefop.europa.eu/en/news-and-press/news/refernet-france-reforming-continuing-vocational-training-2018-bill).

The following categories of VET teachers and trainers are in place:

  • VET school teachers;
  • apprenticeship general courses teachers;
  • apprenticeship technical, theoretical and practical courses teachers;
  • in-company apprenticeship mentors (in-company trainers) ([71]Centre Inffo (2016). Supporting teachers and trainers for successful reforms and quality of vocational education and training: mapping their professional development in the EU –France. Cedefop ReferNet thematic perspectives series.
    http://libserver.cedefop.europa.eu/vetelib/2016/ReferNet_FR_TT.pdf
    ).

Requirements for VET school teachers A national entrance examination has been set up for teachers wishing to work as vocational teachers in upper secondary vocational programmes (lycée professionnel). To participate, candidates must demonstrate either a level of qualification in the subject to be taught or a number of years of professional practice in the relevant profession.

Requirements for teachers in apprenticeship training centres (CFA) and in-company trainers For apprenticeship, there is no national examination to become a teacher; each apprenticeship training centre (CFA – centre de formation des apprentis) does its own recruitment, and candidates should apply directly to it. Formal requirements for CFA teaching staff:

  • VET teachers (general teaching roles) must demonstrate a qualification equivalent to that required for a similar post in a public establishment;
  • in-company trainers, called apprenticeship mentors (maîtres d’apprentissage) (performing technical, theoretical and practical teaching roles) must have a relevant qualification that is at least at the same level as the qualification that the apprentices are working towards and have several years of working experience in the relevant speciality/skills.

In IVET

Teachers may benefit from continuing training schemes.

Every year the Ministry of Education prepares a National training plan (Plan national de formation, PNF), which sets out guidelines for continuing training of State education staff ([72]http://www.education.gouv.fr/pid285/bulletin_officiel.html?cid_bo=131780
http://cache.media.education.gouv.fr/file/26/85/0/perso149_annexe_972850.pdf
).

In 2018, a circular for 2018/19 is supporting initiatives to encourage regional education authorities support training activities for VET school teachers, reinforce contacts with trades and professions and relationships between schools and businesses ([73]https://www.education.gouv.fr/pid285/bulletin_officiel.html?cid_bo=131780).

In CVET

CVET trainers may benefit from dedicated training programmes for their continuing professional development.

A range of CVET programmes exist, such as pedagogy adapted to adult education, to the conception and management of training actions and other skills development paths. These are accessible throughout the main CVET training schemes (the skills development plan at the initiative of the employer and the personal training account (CPF) scheme at the initiative of the employee). Participation of their staff in continuous training actions is a criterion required for the quality accreditation of the training providers. Professional skills and continuing professional development of VET instructors are among quality criteria required for training providers, so that their programmes can be funded by the main CVET funding bodies.

More information is available in the Cedefop ReferNet thematic perspective on teachers and trainers ([74]http://www.cedefop.europa.eu/en/publications-and-resources/country-reports/teachers-and-trainers).

The role of skills operators in skills anticipation

Following the 2018 reform ([75]Loi n° 2018-771 du 5 septembre 2018 pour la liberté de choisir son avenir professionnel [The 2018 Bill for the freedom to choose one’s professional future]:
https://www.legifrance.gouv.fr/affichTexte.do;jsessionid=A6446FA6AF9D1ED55743DC8A12894157.tplgfr36s_2?cidTexte=JORFTEXT000037367660&categorieLien=id
), Skills operators (OPCO) ([76]OPCO - Opérateurs de compétences (former OPCA):
https://travail-emploi.gouv.fr/ministere/acteurs/partenaires/article/opca-organismes-paritaires-collecteurs-agrees
) is a new body which is managed by social partners and supervised by France Competence ([77]France Competences is the new governance and monitoring body on VET implementation and financing: https://travail-emploi.gouv.fr/ministere/acteurs/agences-et-operateurs/a...). As part of their mandate, OPCO will support skills anticipation in the labour market by:

  • supporting companies and professional sectors to build forward-looking management of jobs and skills;
  • providing technical support to professional branches and a local service to small and medium-sized businesses;
  • helping companies and industries to anticipate technological changes and needs in their businesses;
  • supporting companies involved in apprenticeships ([78]Joint construction of vocational qualifications (that may be acquired in IVET or in apprenticeships), definition of the cost of the contract for diplomas and professional titles, payment of CFAs, etc.) to plan and implement their training provision.

Regional employment and training observatories ([79]Oref - Observatoire régional de l’emploi et de la formation:
http://reseau.intercariforef.org/
) provide regionally based systems for analysis and research on the relationship between employment, training and qualification requirements. Using data provided by their national and regional VET stakeholders, they conduct research and provide expertise to anticipate economic changes and skills for the future. They focus on:

  • training needs;
  • job trends;
  • links between employment and training;
  • sectoral approaches;
  • professional mobility and economic development.

Financial support to SMEs

Public subsidies are in place to support very small and small companies anticipate their human resources management skills.

--------

Information on skills anticipation in France is also available in Cedefop skills panorama, 2017 ([80]Skills Panorama (2017). Skills anticipation in France. Analytical highlights series. Available at
http://skillspanorama.cedefop.europa.eu/en/analytical_highlights/skills-anticipation-france
).

See also Cedefop’s skills forecast ([81]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/skills-forecast) and European skills index ([82]https://skillspanorama.cedefop.europa.eu/en/indicators/european-skills-index)

Designing VET qualifications

The framework for establishing professional qualifications is based on certification processes in place since 2002 when the national committee on vocational qualifications (Commission nationale de la certification professionnelle- CNCP) and the national register of vocational qualifications (Registre national de la certification professionnelle, RNCP) were put in place ([83]See also Cedefop (2016). European inventory on NQF, 2016: France. Cedefop country specific report.
http://www.cedefop.europa.eu/files/france_-_european_inventory_on_nqf_2016.pdf
).

Certification process refers to a description of skills, abilities and knowledge associated with a qualification that is necessary to exercise this profession, function or professional activity. It’s a document, obtained by an individual following a set procedure, which confirms these professional skills according to given criteria. In 2017, there were around 18 000 identified qualifications. More than 15 500 vocational qualifications were listed in the RNCP ([84]CNCP (2017). Rapport au Premier Ministre, 2017 [Activity report 2017].
http://www.cncp.gouv.fr/sites/default/files/media/projet_ra2017ga2.pdf
). These processes lead to a variety of vocational qualifications:

  • IVET certificates and qualifications (EQF levels 3 to 7), which are awarded on behalf of the State by ministries;
  • CVET sectoral qualifications recognised by the social partners and issued by other bodies:
  • certificates of professional qualifications (CQP) (certificat de qualification professionnelle) created by the social partners of a branch;
  • the title of ‘qualified engineer’ (titre d’ingénieur diplômé) created and controlled by the CTI (Commission des titres d’ingénieur – engineering qualification committee) ([85]https://www.cti-commission.fr/);
  • the vocational certificate (certificat professionnel) created by public or private training providers ([86]Such as: (a) consular schools placed under the control of the chambers of trades and crafts or the chamber of commerce and industry;(b) the National Conservatory of Arts and trades - CNAM (Conservatoire national des arts et métiers) or the national association for adult vocational training - AFPA (Association pour la formation des adultes); (c) private establishments awarding vocational qualifications and diplomas in their own name.).
  • Most of these CVET qualifications are registered in the RNCP.

Designing IVET qualifications

Ministries design and create VET qualifications on the basis of opinions from consultative bodies:

  • vocational advisory committees (CPC - commissions professionnelles consultatives), mainly collaborating with the education ministry, but also those of employment, social affairs, agriculture, youth and sport, and culture;
  • national bodies responsible for assessing training courses on behalf of the Ministry of Higher Education.

Vocational advisory committees (CPC)

CPCs are a place of consultation between VET stakeholders for State-issued VET qualifications. Members include representatives of employers (large companies, business federations), trade union organisations in the sectors concerned, teachers, the government and other qualified professionals). CPSs are divided into major spheres of economic activity and decide on needs for qualifications based on skill needs in the labour market. One CPC per ministry is mandatory for all ministries delivering VET qualifications. By 2018, 14 committees were set up by the education ministry representing the main sectors (over 560 members); seven by the labour ministry; one in each of the ministries of social affairs, agriculture, youth and sport and culture. CPCs operating under the ministry of labour cover the following fields:

  • construction and public works;
  • wholesale and retail trade;
  • industry;
  • management and data processing;
  • the tourism, leisure, hotel and restaurant sectors;
  • transport and logistics;
  • ‘other services to businesses, local authorities and individuals’;

The education ministry publishes its own certification processes in two guides: the Guidelines for the development of professional qualifications; and the Guidelines for members of the vocational advisory committees. To design a new or update a VET qualification the following steps are necessary:

  • a study ([87]Outside research bodies can be commissioned to pursue the work.) analyses economic data and sectoral trends to define (future) needs in jobs and skills;
  • a directory listing professional activities relevant to the qualification is drawn up; certification processes are detailed in a certification directory (expected skills outcomes, associated knowledge, assessment and approval procedures);
  • the file is submitted for consultation by two advisory bodies, the higher council for education (CSE) ([88]Conseil supérieur de l’éducation.) and the advisory inter-professional committee (CIC) ([89]Comité interprofessionnel consultatif.); the latter focuses on upper secondary technological and vocational qualifications and on future trends in education. CIC work affects the work of all vocational advisory committees (CPCs). CPCs are represented on the CIC board.

Certification processes under the Ministry of Higher education

Except for the BTS (advanced technician certificate) and the DUT (undergraduate certificate of technology), EQF level 5 qualifications, there is no standardised description of the content and duration of courses or the procedures for assessing students.

The higher education qualification system is exclusively regulated by an assessment process (which forms a quality assurance process), conceived as an evaluation of the quality of training content: the quality of training programmes in terms of aims and objectives, the level of education, the quality of the education teams, the job prospects of students. The main assessment bodies are:

  • the high council for the evaluation of research and higher education for training programmes provided by universities and certain schools;
  • the engineering qualification committee (CTI) for engineering courses and qualifications;
  • the management training and qualification assessment committee for business and management schools (Grandes ecoles).

Assessment is based on a set of criteria, notably the link with research, relevance to the training offer of the HE institution, and subsequent professional opportunities.

The decision establishing a (new) qualification is published in the official Journal of HE and Research. For engineering qualifications a ‘decision’ is taken by the CTI for private engineering schools, and a notice is given for State engineering schools.

Certification processes in CVET

Professional sectors may create their own qualifications through two main bodies: the joint employment and vocational training committees and the observatories of trades and qualifications.

The joint employment and vocational training committees (CPNEF) ( [90]Commission paritaire nationale de l’emploi et de la formation professionnelle.) was created by employers and trade unions in 1069 and its scope widened to vocational training. Based on research on quantitative and qualitative data on trends in employment ([91]Backed up by the Employment and qualifications observatories.) they identify priority areas in sectors. Certain branches have delegated to CPNEF the responsibility for creating sector-specific CQPs/ certificates of professional qualifications. For a CQP to be registered to the national register of qualifications (RNCP) the request should be initiated by CPNEF and not the branches themselves.

Since 2004 ([92]The 2004 Law on lifelong learning and social dialogue.) each industrial sector (one or several branches) must create its own observatory of trades and qualifications (OPMQ,Observatoires Prospectifs des Métiers et des Qualifications). OPMQs help businesses define their training policies and employees develop their skills ([93]In other words, in establishing their professional projects – projet professionnel in the national context.). Their work focuses on:

  • studies on topics associated with the management of jobs and skills in the sector (diversity and gender equality, training, ageing management, skills replacement, etc.);
  • statistical databases on sectoral economics, jobs and workforce, basic or lifelong training;
  • job maps or directories (job descriptions, job lists).

There is no fixed or mandatory methodology for establishing sectoral qualifications. A 2012 methodological guide produced by CPNFP for the development of certificates of professional qualifications/CQPs suggests:

  • conducting a study on the need for a new qualification;
  • listing the set of competences and skills (and if possible, relevant training content) a learner should possess to be awarded a vocational certificate for a given sector;
  • developing assessment tools and processes;
  • defining the process for implementing relevant training (including apprenticeships)

The results from OPMQ studies are used by both the vocational advisory committees (CPC), which are advisory bodies on VET established by the Ministries, and the joint employment and vocational training committees (CPNEF) (see above) to identify training needs and sectoral skills requirements. France Compétences, as the new VET governance State body, should support and promote the work on the observatories.

The national register of vocational qualifications (RNCP) is a centralised repository of all IVET and CVET vocational qualifications issued by public and private institutions and professional bodies. In the new governance setting (CVET 2018 reform), France Compétences shall monitor certification processes for RNCP qualifications:

  • IVET qualifications awarded by the State (ministries, assisted by vocational advisory committees, CPCs);
  • sector-specific certificates of professional qualifications (certificats de qualification professionnelle, CQP) developed by the social partners; these are not automatically registered to the RNCP; the professional body concerned makes a request (application form), subject to CNCP approval; this is the only body that may request the inclusion in the RNCP register;
  • other vocational qualifications, described as ‘qualifications voluntarily registered with the RNCP’, produced by training organisations, professional bodies and ministers without CPC backing. The registration of qualifications in the RNCP is subject to approval by the national committee on vocational qualifications (CNCP).

Qualifications in the RNCP register are nationally recognised and are classified by field of activity and level of qualification. Private training organisations have no obligation to register their professional qualifications in the RNCP ( [94]Provided that they do not use terms in the description such as licence, master or diplôme d’État. See: CNCP (2015). Rapport au Premier Ministre, 2015 [Activity report 2015].
http://www.cncp.gouv.fr/sites/default/files/media/rapport_premier_ministre_cncp_2015_0.pdf
).

Modularisation of RNCP qualifications From 1 January 2019, it became mandatory that all RNCP vocational qualifications are structured into skills sets (blocs de compétences).

A skills set is a minimum, homogeneous and coherent set of competences contributing to the autonomous exercise of a professional activity that can be credited.

The measure aims to facilitate equivalences and bridges between qualifications. These blocks can be assessed through validation of prior learning ([95]The vocational aptitude certificate (CAP), the vocational baccalaureate and the advanced technical diploma (BTS) are already offered in skills set in adult education.). An online database for referencing qualifications in skill blocks is in place ([96]www.certifications-blocs-competences.fr/inscription).

The 2018 reform ([97]The 2018 Bill for the freedom to choose one’s professional future:
https://www.legifrance.gouv.fr/affichTexte.do;jsessionid=A6446FA6AF9D1ED55743DC8A12894157.tplgfr36s_2?cidTexte=JORFTEXT000037367660&categorieLien=id
) has put emphasis on transparency and efficiency through new obligations for all training providers using mutual funds to inform and monitor their training actions. France Compétences is the new governance and monitoring body on VET implementation and financing ([98]https://travail-emploi.gouv.fr/ministere/acteurs/agences-et-operateurs/a...) responsible for the quality of vocational training and apprenticeship. It will evaluate the actions carried out by skills operators ([99]OCPO (former OPCA) are joint bodies organised by professional sector managed by social partners, and supervised by France Compétences. They shall distribute funds for training, support skills anticipation in SMEs and be involved in apprenticeship provision.), the evolution of costs, and can alert the State to possible malfunctions.

France Compétences shall monitor implementation of quality arrangements. All training organisations, including apprenticeship training centres, will have to be quality certified by 2021, as long as the training they offer is financed by public funds and mutual funds.

Training providers shall be ‘quality’ certified: the process and body that will run it is to be defined (an ad hoc national reference framework is under development in 2019). The use of specific indicators to assess the quality of the training offer and associated audit procedures are also considered.

The methodology used for certification processes is a quality assurance mechanism in itself ([100]For instance, ministries develop standards for professional diplomas in consultation with professionals/experts, define examination regulations, award diplomas, offer various types of training in its institutions, recruit, train and pay teachers, monitor the quality of training and reports on the results and resources used.).The need for the training organisation to be accredited or recognised by the awarding authority is conceived as an important element of quality ([101]Ministère du Travail (2018). Les opérateurs de compétences : transformer la formation professionnelle pour répondre aux enjeux de compétences [Skills operators: transform vocational training to meet skills challenges]. A report by Marx, M. and Bagorski, R. published on 6.9.2018.
https://travail-emploi.gouv.fr/ministere/documentation-et-publications-officielles/rapports/article/rapport-les-operateurs-de-competences-transformer-la-formation-professionnelle
).

Since the social modernisation act of 17th January 2002, validation of non-formal and informal learning (Validation des acquis de l’expérience) (VAE) has offered a third route to qualifications and vocational certificates, alongside initial education and training and lifelong learning.

In order to obtain accreditation, the applicant (self-employed, employees or volunteers) must submit a dossier and potentially undergo an interview with the jury for the relevant qualification, which then decides whether to award the chosen qualification fully or partially. The interview is used to complete and clarify the information contained in the application dossier. It allows the jury to check the authenticity of the file, to check the level of proficiency of all the skills required to obtain the (partial) qualification and to discuss the experience and practice acquired in respect of the activities or functions that the applicant has exercised or held.

Through VAE, anybody can obtain a full qualification or certificate based on his or her professional experience ([102]Around 24 600 qualifications and degrees awarded. See DARES (2017). La VAE en 2015 dans les ministères certificateurs: le nombre de diplômés par la voie de la VAE continue de diminuer [VAE in 2015 in the accrediting ministries : the number of people who have obtained a degree through the VAE process is decreasing]. DARES results series, June 2017, No 038.
https://dares.travail-emploi.gouv.fr/IMG/pdf/2017-038v2.pdf
).

All vocational qualifications registered in the national register of vocational qualifications (RNCP) can also be accessed via validation of non-formal and informal learning. This includes all formal qualifications issued by the State and those recognised by the social partners.

Since 2016, three IVET qualifications are accessible in adult education for certification through VAE ([103]The vocational aptitude certificate (CAP) (EQF level 3); the vocational Baccalaureate (EQF level 4) and the advanced technical diploma (BTS) (EQF level 5).), and can possibly be partly validated in skills set (blocs de compétences). Offering more IVET qualifications in a modular form depends on (high) demand for such qualifications in adult education. An online database for referencing qualifications in skill blocks is in place ([104]www.certifications-blocs-competences.fr/inscription).

For more information about arrangements for the validation of non-formal and informal learning please visit Cedefop’s European database ([105]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/european-database-on-validation-of-non-formal-and-informal-learning).

The personal training account

The personal training account scheme is a personal right to training (CPF, compte personnel de formation) that can be used by any employee, throughout working life, to follow qualifying training. From 2019, the account is funded in Euro at the end of each year and by additional financing, also fixed in Euro. The amount of acquired rights is fixed by decree. Part-time employees have the same rights as full-time employees. The amount of the fees should be EUR 500 per year to a maximum of EUR 5000 over a period of 10 years. Entitlements will always be increased for employees with low qualifications (below NQF level V / EQF level 3) (EUR 800 per year to a maximum of EUR 8 000).

The 2018 Bill sets up a new mechanism, the personal training account scheme (CPF) for career transition. An employee may use his CPF account to enrol in training actions intended to bring about change, including by benefiting from specific leave if the training is carried out, in whole or in part, over working time. The remuneration of the beneficiary of the career transition project is then paid by the employer (for firms employing 50 persons or more), who is reimbursed by one regional joint body (joint body regional committee called transition pro), or paid directly by the regional joint body if employed in a firm of fewer than 50 persons ([106]https://travail-emploi.gouv.fr/formation-professionnelle/formation-des-salaries/article/projet-de-transition-professionnelle
https://www.defi-metiers.fr/breves/un-ani-precise-les-missions-des-transitions-pro-les-commissions-paritaires
).

Training aids for jobseekers

There are many training aids for jobseekers. For example, Pôle emploi regularly buys training places in different training organisations. It selects and finances training programmes that support skills development at local level, in targeted sectors of the economy where there is insufficient demand for employment (jobs in tension) ([107]https://www.pole-emploi.fr/candidat/l-action-de-formation-conventionnee-par-pole-emploi-afc--@/article.jspz?id=60683).

Individual training aid

The individual training aid (AIF, aide individuelle à la formation) provided by Pôle emploi indirectly helps to finance vocational training. The training must have a direct professional aim (award a VET qualification, such as BTS, EQF level 3 or master degree) and be of between one and three years maximum duration. Depending on the cost of the training, Pôle emploi reimburses the costs directly to the training organisation where it takes place ([108]https://www.pole-emploi.fr/candidat/l-aide-individuelle-a-la-formation-aif--@/article.jspz?id=60856).

The government provides public subsidies for companies, primarily small and very small, and for professional organisations, to promote training, employment and skills.

Public subsidies

The purpose of these subsidies varies. National credits can be granted for:

  • encouraging and helping SMEs to anticipate their human resources management needs;
  • public employment service support to jobseekers in accompanying economic change and securing career paths;
  • training and adaptation agreements of the National Employment Fund (FNE-Formation). Vocational training measures are implemented to support workforce employability in a changing work environment;
  • support for employees to adapt to new jobs due to technological innovation, technical developments or changes in the production sector ([109]Annexe au projet de loi de finances pour formation professionnelle 2018 [Annex to the Bill on the VET budget 2018]: publique.budget.gouv.fr/sites/performance_publique/files/farandole/ressources/2018/pap/pdf/jaunes/Jaune2018_formation_professionnelle.pdf).

Financial incentives to engage in apprenticeship Regional or government subsidies encourage apprenticeship contract take-up, which is a major priority of public youth employment policy.

Since 2018 a one-off subsidy is available for small businesses (fewer than 250 employees) that recruit an apprentice, if this prepares for certification up to Baccalaureate level (EQF 4 or less).

Another complementary financial incentive takes the form of an internship bonus; this is a subsidy granted to companies employing 250 people or more, if they go beyond the minimum threshold for employees on work study contracts.

In addition to these subsidies, apprenticeship contracts are fully or partially exempt from social security charges, the costs of training apprentice supervisors are supported by the skills operators (Opérateurs de competences, Opco), and specific subsidies are granted for the recruitment of apprentices with disabilities.

Training aid for job creation In some cases, an employer who hires a jobseeker who needs training to carry out the requested tasks may benefit from training aid financed by Pôle emploi. Operational employment preparation (POE, préparation opérationnelle à l’emploi) is financial assistance allowing jobseekers to be trained in order to be able to respond to a job offer. This assistance may be granted to the employer who undertakes to recruit the jobseeker after the training period ([110]https://www.service-public.fr/professionnels-entreprises/vosdroits/F17485).

Targeted support to SMEs Following the 2018 reform (the 2018 Bill), the former OPCA became skills operators (OPCO) ([111]OPCO - Opérateurs de compétences (former OPCA):
https://travail-emploi.gouv.fr/ministere/acteurs/partenaires/article/opca-organismes-paritaires-collecteurs-agrees
), managed by social partners. Their new responsibilities include supporting companies and professional sectors to anticipate and create forward-looking management of jobs and skills.

OPCO will provide technical support to professional branches and a local service to small and medium-sized businesses in skills anticipation and apprenticeship provision (joint creation of vocational diplomas, definition of the cost of the contract for diplomas and professional titles, payment for apprenticeship training centres).

Skills operators will manage two envelopes, the financing of alternance training programmes (apprenticeship contracts and professionalisation contracts) and the financing of the training plan for companies ([112]French employers can organise collective training for their employees. All these training sessions are presented in a specific document, the skill development or training plans.) with fewer than 50 employees.

Lifelong career guidance was established by law in 2009 ([113]Framework law on (vocational) training of November, 24 2009.). A public career information and guidance service (SPO, service public de l’orientation) is in place including online and telephone services ([114]A web portal (
www.orientation-pour-tous.fr) and a single national number (08 11 70 39 39).
); local career information and advice services are based on regionally approved partnership agreements backed by the Regional Council. The right to career guidance depends on different organisations and instruments, depending on age and individual status.

Career guidance in IVET

Throughout secondary education, an individualised vocational guidance service is offered to every learner to discover the world of work, professions and training pathways leading to (sectoral) skills and qualifications.

Parcours avenir ([115]http://www.education.gouv.fr/cid83948/le-parcours-avenir.html), a support programme set up for pupils and their families, informs and guides education choices to ensure a smoother transition from lower secondary general education to upper secondary paths.

In grade 9 (last year of lower secondary), a preparatory vocational guidance subject has been added to raise awareness of the upper secondary vocational pathway and apprenticeship opportunities offered ([116]The 2018 Law for the freedom to choose one’s professional future [LOI n° 2018-771 du 5 septembre 2018 pour la liberté de choisir son avenir professionnel]:https://www.legifrance.gouv.fr/eli/loi/2018/9/5/MTRX1808061L/jo/texte).

The 2018 law for the freedom to choose one’s professional future supported integration into employment and the value of diplomas from all apprenticeship training centres (CFAs) and vocational high schools. It assigned regions a strengthened role in their territories; they coordinate the ‘discovery of sectors and professions’ guidance scheme.

Dedicated bodies such as the National Office for Information on Curricula and Professions - ONISEP ([117]Office national d’information sur les enseignements et les professions.) and the Youth information and documentation centre – CIDJ ([118]Centre d’information et de documentation jeunesse (CIDJ).) provide their services to young people. The 2018 law allows collaboration between ONISEP and the Regions to develop and distribute career guidance material to the young.

Career guidance for adults, employees or jobseekers

The public lifelong career guidance service guarantees universal access to free, full and objective information on careers, training, qualifications, outlets and pay scales and access to high-quality, network-based career advice and support services. Various systems support this, both within and outside companies:

  • compulsory professional development interviews run every two years in companies, including ([119]Following the 2018 Law for the freedom to choose one’s professional future.) information on validation of non-formal and informal learning (VAE);
  • the personal training account scheme, CPF ([120]Compte personnel de formation.);
  • the professional development counselling service, CEP ([121]Conseil en évolution professionnelle.);
  • career development interviews, career assessment reports, appraisals, etc., are used to evaluate career prospects.

These career guidance services are provided by career information and guidance bodies such as local support services, career advice institutions, employment and training centres, the Pôle emploi, and the joint collecting bodies.

The professional development counselling service, CEP ([122]Conseil en évolution professionnelle.), in place since 2013, supports career development and security for all individuals engaged into working life. It provides information on the work environment and the evolution of jobs in the territory, on the necessary skills to acquire and develop, and on available training schemes. A set of specifications adopted by the Minister of Labour will specify the evolution of the CEP, which will always be free of charge.

Counselling is provided by the four national operators for specific audiences (disabled, managers, young people and jobseekers). In January 2020, employees will be advised by new operators, selected at regional level, on the basis of the national specifications. The selection of these new operators will be orchestrated by France Compétences.

Public and private career guidance and counselling actors at national level

Job-related information

Public bodies produce quantitative and qualitative studies on employment and training: France Stratégie ([123]http://www.strategie.gouv.fr), the Centre for studies and research on certifications (Céreq) ([124]Centre d’études et de recherches sur les qualifications.), the Centre for employment and labour research (Ceet) ([125]Centre d’études de l’emploi et du travail:
http://recherche.cnam.fr/ceet/centre-d-etudes-de-l-emploi-et-du-travail-ceet--859105.kjsp
), the national institute for statistics and economic research (INSEE) and the research and statistics management department (Darès) ([126]La Direction de l'animation de la recherche, des études et des statistiques.). Results support public debate; they are used by public authorities and VET stakeholders developing and implementing VET policies at national and regional level, and by ministries and social and economic actors determining (new) labour market needs, IVET (including technological) policies and CVET training needs and policies ([127]See also Observatory of trades and qualifications (OPMQ - Observatoires prospectifs des métiers et des qualifications) in Section
12. Shaping VET Q - design
).

Centre Inffo in partnership with the main career information and guidance providers ([128]Different ministries, the regions, the professional bodies, the CARIF-OREF, Pôle emploi, the national office for education and career information (Onisep) or the youth information and documentation center (CIDJ).) runs the national online career guidance for all platform. The online service provides real-time data on careers and jobs, training courses, events, videos and personal stories. It offers more than 2 000 job descriptions, 200 000 basic education and lifelong learning courses, directory of approved training providers, practical information on schemes, entitlements and procedures.

Information on training sources

Such information is subject to new requirements for clarity and visibility. Since May 2012, the Government has published and updated the list of registered and approved training structures on the website https://www.data.gouv.fr

The ‘ offre-info’ portal is a national reference for training centres and training programmes run by the Carif-Oref (Centre Animation Ressources d'Information sur la Formation / Observatoire Régional Emploi Formation).

Public and private career guidance and counselling actors at regional/local levels

Carif – Training management, resource and information centres operate in all regions collecting, producing and disseminating information on training options, entitlements and access to training. They assist local information providers in their role. The information sources they provide guide the general public, training providers and operators in career and training opportunities and processes in place.

Oref – Regional employment and training observatories provide regionally based systems for analysis and research on the relationship between employment, training and qualification requirements. Using data provided by their national and regional partners, they conduct research and provide expertise in order to anticipate economic changes and adjust skills to projected employment needs. They deal with training needs, job trends, the link between employment and training, sectoral approaches, professional mobility, and economic development.

Please see also:

Vocational education and training system chart

Tertiary

Click on a programme type to see more info
Programme Types

EQF 5

Higher technician

programmes (BTS, DUT)

WBL 30%,

2 years

ISCED 554

Tertiary VET programmes leading to EQF 5, ISCED 554 (DUT- Diplôme universitaire technologique – Undergraduate certificate of technology) (BTS – Brevet de technicien supérieur – advanced technician certificate)
EQF level
5
ISCED-P 2011 level

554

Usual entry grade

13

Usual completion grade

14

Usual entry age

18

Usual completion age

20

Length of a programme (years)

2

  
Is it part of compulsory education and training?

N

(education is compulsory until age16)

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

Y

Is it offered free of charge?

Y

Is it available for adults?

Y

Programmes are accessible to learners over 18

ECVET or other credits

Information not available ([150]https://ec.europa.eu/education/resources-and-tools/the-european-credit-system-for-vocational-education-and-training-ecvet_en )

Other credit system: 120 ECTS points ([151]French referencing report to the European qualifications framework for lifelong learning, 2010:
https://ec.europa.eu/ploteus/sites/eac-eqf/files/Report-FR-NQF-EQF-VF.pdf
)

 

Learning forms (e.g. dual, part-time, distance)

In classrooms (WBL 30%):

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies (1 or 2 for BTS programmes).

In apprenticeship training centres (CFAs) (WBL 67%):

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.
Main providers
  • public and private education schools (Advanced technician certificate - BTS - Brevet de technicien supérieur);
  • In university technology institutes attached to universities (IUTs) (DUT - Diplôme universitaire technologique - Undergraduate certificate of technology);
  • apprenticeship training centres (CFAs);
  • accessible through validation of non-formal and informal learning (for adults).
Share of work-based learning provided by schools and companies
  • WBL 30% in classroom-based programmes;
  • WBL 67% in apprenticeship training centres (in-company practice).
Work-based learning type (workshops at schools, in-company training / apprenticeships)

In VET institutions:

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.

In apprenticeship training centres (CFAs):

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.
Main target groups
  • people over 18 in VET institutions;
  • people in adult education

Learners with an upper secondary technological baccalaureate usually continue their studies in tertiary VET programmes in selected fields. Those with a vocational baccalaureate may also access these programmes.

Entry requirements for learners (qualification/education level, age)

All learners having completed upper secondary general, technological or vocational programmes may enrol in VET programmes at EQF level 5 in selected fields.

Entry through validation of non-formal and informal learning is also possible.

Assessment of learning outcomes

At the end of the respective training programme, learners take an exam to obtain a VET qualification.

Diplomas/certificates provided

Learners follow programmes in an advanced section of high schools preparing for an advanced technician certificate - BTS - Brevet de technicien supérieur;

Learners enrolled in VET programmes offered by university technology institutes (IUTs) prepare an undergraduate certificate of technology (DUT - Diplôme universitaire technologique).

All IVET programmes are offered, assessed and recognised by the State.

Examples of qualifications
  • bank – customer adviser (Bank- conseiller de clientèle) (BTS), EQF 5;
  • librarian (documentaliste) (DUT), EQF5

Information on 88 BTS ([152]BTS, Brevet de technicien supérieur [advanced technician certificate],
https://www.sup.adc.education.fr/btslst/ [accessed 15.3.2019].
) diplomas across all fields; DUT ([153]DUT, Diplôme universitaire technologique [undergraduate certificate of technology],
http://www.iut.fr/formations-et-diplomes/les-specialites/les-specialites-de-dut.html [accessed 15.3.2019].
) diplomas in 22 specialities is available online.

Progression opportunities for learners after graduation

BTS (Brevet de technicien supérieur) ([154]http://www.enseignementsup-recherche.gouv.fr/cid20183/brevet-de-techniciensuperieur-b.t.s.html) - the Advanced technician certificate provides specialist education and training. While the purpose of the BTS is immediate entry into work, it is nevertheless possible to continue studying.

  • entry to the labour market;
  • pursuing a vocational Bachelor’s degree (EQF 6);
  • access is also possible to:
    • preparatory courses for the selective admission to Grandes Ecoles (elit HE schools);
    • access to some engineering schools (after examination or interview or through admission of an application file).

DUT - Diplôme universitaire technologique Undergraduate certificate of technology ([155]http://www.enseignementsup-recherche.gouv.fr/cid20192/diplome-universitairetechnologie.html#specialites-dut). These qualifications prepare people for technical and professional management roles in certain sectors of production, applied research and the service sector. It is also possible for students to pursue their education, for example towards a Bachelor degree.

  • entry to the labour market;
  • pursuing a Bachelor or vocational Bachelor degree (EQF 6);
  • acces is also possible to some engineering schools (after examination or interview or through admission of an application file).
Destination of graduates

Information not available

Awards through validation of prior learning

Y

All the qualifications developed by the State can be accessed via validation of non-formal and informal learning (VAE- validation des acquis de l'expérience). VAE is the third option to access formal (VET) qualifications, mainly in adult education.

General education subjects

Information not available

Key competences

The key competences are included in the general courses that are defined (syllabi) and examined nationally ([156]Centre Inffo (2016). Key competences in vocational education and training – France. Cedefop ReferNet thematic perspectives series.
http://libserver.cedefop.europa.eu/vetelib/2016/ReferNet_FR_KC.pdf
)

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

13% ([157]2014-16) of graduates with a BTS, DUT or equivalent EQF 5 qualification as a share of all graduates from initial education ([158]Initial education extends from lower secondary to higher education.
).

In terms of gender, there are more men than women.

 

Breakdown of young people at the end of initial training according to their highest diploma

Source: Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques 2018, p. 253 ([159]http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf).

EQF 6

Bachelor programmes

WBL 10%,

3 years

ISCED 655

Vocational Bachelor leading to EQF level 6, ISCED 655 (Licence professionnelle)
EQF level
6
ISCED-P 2011 level

655

Usual entry grade

13

Usual completion grade

16

Usual entry age

18

Usual completion age

21

Length of a programme (years)

3

  
Is it part of compulsory education and training?

N

(education is compulsory until age16)

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

Y

Is it offered free of charge?

Y

Is it available for adults?

Y

Programmes are accessible to learners over 18

ECVET or other credits
Learning forms (e.g. dual, part-time, distance)

In full time university programmes (WBL 10%):

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.

In apprenticeship delivery (WBL 67%):

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.
Main providers
  • public universities (EPSCPs) ([161]EPSCPs are scientific, cultural and professional public institutions (établissements publics à caractère scientifique, culturel et professionnel). They consist of universities and some 71 other establishments (mainly public engineering schools). Only EPSCPs may award Bachelor’s and Master degrees, therefore private universities may only award such diplomas if they have signed a partnership agreement with an EPSCP.),
  • private higher education institutions;
  • accessible through validation of non-formal and informal learning (for adults).
Share of work-based learning provided by schools and companies
  • WBL 10% in classroom-based programmes;
  • WBL 67% in apprenticeship (in-company practice).
Work-based learning type (workshops at schools, in-company training / apprenticeships)

In VET institutions:

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.

In apprenticeship delivery:

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.
Main target groups
  • people over 18 in VET institutions;
  • people in adult education.
Entry requirements for learners (qualification/education level, age)
  • learners with an upper secondary general baccalaureate may enrol in three-year vocational bachelor programmes;
  • those with an advanced technician certificate (BTS) or an undergraduate certificate of technology (DUT) (EQF level 5 qualifications) may continue their studies to acquire a vocational bachelor in selected fields. The programme requires two semesters (one year), a 12-16 week work placement and the completion of a supervised project.

Entry through validation of non-formal and informal learning is also possible.

Assessment of learning outcomes

At the end of the respective training programme, learners take an exam to obtain a VET qualification.

For holders of a BTS or DUT (EQF level 5 VET qualifications) a 12-16 week work placement and the completion of a supervised project are also necessary.

Diplomas/certificates provided

Vocational Bachelor (Licence professionnelle), EQF level 6, ISCED 655.

All IVET programmes are offered, assessed and recognised by the State.

Examples of qualifications

Digital marketing (E-commerce et marketing numérique), tourism and leisure sports (Tourisme et loisirs sportifs).

Information on 173 vocational Bachelor degrees across all fields is available online ([162]http://www.enseignementsup-recherche.gouv.fr/cid20181/licence-professionnelle.html [accessed 15.03.2019]).

Progression opportunities for learners after graduation

The vocational Bachelor degree was designed to allow people to move directly into a profession. It relates to European undertakings on the provision of a degree course that reflects the demands of the labour market in Europe and to the need for new qualifications between advanced technician level and advanced executive-engineer level. It enables students who wish to acquire quickly a professional qualification corresponding to clearly identified needs and jobs.

  • entry to the labour market;
  • pursuing a vocational Master degree (EQF 7).
Destination of graduates

Information not available

Awards through validation of prior learning

Y

All the qualifications developed by the State can be accessed via validation of non-formal and informal learning (VAE- validation des acquis de l'expérience). VAE is the third option to access formal (VET) qualifications, mainly in adult education.

General education subjects

Information not available

Key competences

Information not available

The key competences are included in the general courses that are defined (syllabi) and examined nationally ([163]Centre Inffo (2016). Key competences in vocational education and training – France. Cedefop ReferNet thematic perspectives series.
http://libserver.cedefop.europa.eu/vetelib/2016/ReferNet_FR_KC.pdf
).

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

9% ([164]2014-16.) of graduates with a bachelor degree programme as a share of all graduates from initial education ([165]Initial education extends from lower secondary to higher education.).

Available national statistics do not differentiate between different types of bachelors.

In terms of gender, there are more women than men.

 

Breakdown of young people at the end of initial training according to their highest diploma

Source: Ministry of National Education, Higher Education and Research(2018). Repères et références statistiques 2018, p. 253 ([166]http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf).

 

EQF 7

Master programmes

WBL: up to 50%,

2 years

ISCED 757

Vocational Master leading to EQF level 7, ISCED 757 (Master)
EQF level
7
ISCED-P 2011 level

757

Usual entry grade

16

Usual completion grade

17

Usual entry age

21

Usual completion age

22

Length of a programme (years)

2

  
Is it part of compulsory education and training?

N

(education is compulsory until age16)

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

Y

Is it offered free of charge?

Information not available

Is it available for adults?

Y

Programmes are accessible to learners over 18

ECVET or other credits

120 ECTS credits, spread over four semesters.

Learning forms (e.g. dual, part-time, distance)

In full time university programmes (WBL 50%):

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.

In apprenticeship delivery (WBL 67%):

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies
Main providers
  • public universities (EPSCPs) ([167]EPSCPs are scientific, cultural and professional public institutions (établissements publics à caractère scientifique, culturel et professionnel). They consist of universities and some 71 other establishments (mainly public engineering schools). Only EPSCPs may award Bachelor’s and Master degrees, therefore private universities may only award such diplomas if they have signed a partnership agreement with an EPSCP.);
  • private higher education institutions;
  • accessible through validation of non-formal and informal learning (for adults).
Share of work-based learning provided by schools and companies
  • WBL 50% in classroom-based programmes;
  • WBL 67% in apprenticeship (in-company practice)
Work-based learning type (workshops at schools, in-company training / apprenticeships)

In higher education institutions:

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.

In apprenticeship delivery:

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.
Main target groups
  • people over 18 in VET institutions;
  • people in adult education.
Entry requirements for learners (qualification/education level, age)

Learners with a bachelor degree, EQF level 6.

Entry through validation of non-formal and informal learning is also possible.

Assessment of learning outcomes

At the end of the respective training programme, learners take an exam to obtain a VET qualification.

To be awarded a Master degree, learners must demonstrate good knowledge of a modern foreign language ([168]Source:
http://www.enseignementsup-recherche.gouv.fr/cid20193/le-master.html
).

For holders of a BTS or DUT (EQF level 5 VET qualifications) a 12-16 week work placement and the completion of a supervised project are also necessary.

Diplomas/certificates provided

Vocational Master (Master professionnel), EQF 7, ISCED 757.

The course content includes theoretical, methodological and applied (vocational) elements and, when required, one or more internships. It also includes an initiation to research and, in particular, the completion of a dissertation or other original research work.

All IVET programmes are offered, assessed and recognised by the State.

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

The Master degree provides access to high-level jobs for people with five years of education following the baccalaureate or access to PhD studies. Some regulated professions, i.e. professions which can only be exercised with certain qualifications, require a Master degree.

  • entry to the labour market;
  • pursuing PhD studies (EQF 8).
Destination of graduates

Information not available

Awards through validation of prior learning

Y

All the qualifications developed by the State can be accessed via validation of non-formal and informal learning (VAE- validation des acquis de l'expérience). VAE is the third option to access formal (VET) qualifications, mainly in adult education.

General education subjects

Information not available

Key competences

The key competences are included in the general courses that are defined (syllabi) and examined nationally ([169]Centre Inffo (2016). Key competences in vocational education and training – France. Cedefop ReferNet thematic perspectives series.
http://libserver.cedefop.europa.eu/vetelib/2016/ReferNet_FR_KC.pdf
).

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

14% ([170]2014-16) of graduates with a Master or a PhD as a share of all graduates from initial education ([171]Initial education extends from lower secondary to higher education.). National statistics do not differentiate between Master and PhD degrees, and do not specify the share of graduates with a vocational Master.

In terms of gender, there are considerably more women than men.

Breakdown of young people at the end of initial training according to their highest diploma

Source: Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques 2018, p. 253 ([172]http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf).

EQF 7

Qualified engineer

Master degree programmes

at public or private

higher colleges of excellence

5 years,

ISCED 756

‘Qualified engineer’ Master degree leading to EQF level 7, ISCED 756 (titre d’ingénieur diplômé).
EQF level
7
ISCED-P 2011 level

756

Usual entry grade

13

Usual completion grade

17

Usual entry age

18

Usual completion age

23

Length of a programme (years)

5

  
Is it part of compulsory education and training?

N

education is compulsory until age16)

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

Y

Is it offered free of charge?

Y

Is it available for adults?

Y

Programmes are accessible to learners over 18

ECVET or other credits
Learning forms (e.g. dual, part-time, distance)
  • Full-time classroom programmes (Formation initiale sous statut d'étudiant);
    • classroom theoretical vocational learning;
    • practical training in the form of courses, practical work, workshops, indoor and outdoor;
    • project work;
    • interships in companies.
  • delivered as part of lifelong learning programmes (formation continue) ([174]The delivery modes for each accredited HE institution are available at:
    http://www.enic-naric.net/france.aspx; http://www.enseignementsup-recherche.gouv.fr/cid20256/liste-des-ecoles-d...
    )
    • classroom theoretical vocational learning;
    • practical training in the form of courses, practical work, workshops, indoor and outdoor;
    • project work;
    • interships in companies.
  • delivered in apprenticeship (Formation initiale sous statut d'apprenti) (WBL 67%):
    • classroom theoretical vocational learning;
    • practical training in the form of courses, practical work, workshops, indoor and outdoor;
    • project work;
    • internships in companies.
Main providers
  • public or private engineering schools accredited by CTI ([175]CTIs (Commission des titres d’ingénieur / Engineering qualification committee) was established in 1934. CTI role is to assess and accredit HE institutions that may award the title of Qualified Engineer, they main tasks include periodical assessment of all engineering programmes offered nationwide, define the job profile (and award criteria for the title) of a qualified engineer and award the relevant degree and the ‘Quality label’ award:
    https://www.cti-commission.fr/en/la-cti/histoire-et-missions
    );
  • accessible through validation of non-formal and informal learning (VAE).
Share of work-based learning provided by schools and companies
  • WBL 16% in classroom-based programmes;
  • WBL 67% in apprenticeship (in-company practice).
Work-based learning type (workshops at schools, in-company training / apprenticeships)

In VET institutions:

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.

In apprenticeship delivery:

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.
Main target groups
  • people over 18 in VET institutions;
  • people in adult education (formation continue)
Entry requirements for learners (qualification/education level, age)

The 5-year programme is accessible to learners holding general baccalaureate (EQF level 4), ISCED 344.

Entry through validation of non-formal and informal learning is also possible.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

‘Qualified engineer’ Master degree (titre d’ingénieur diplômé), EQF 7, ISCED 747.

The title of ‘qualified engineer’, which has both an academic and professional quality, is protected and controlled by the CTI (commission des titres d’ingénieur – engineering qualification committee). Only institutions that are accredited by the CTI are allowed to award the title of ‘qualified engineer’ ([176]https://www.cti-commission.fr/).

All IVET programmes are offered, assessed and recognised by the State.

Examples of qualifications

‘Qualified engineer’ Master degree (titre d’ingénieur diplômé)

The list of higher education accredited institutions offering the Qualified Engineer Master degree is published each year in the Official Journal of the French Republic and is available online ([177]http://cache.media.enseignementsup-recherche.gouv.fr/file/Formations_et_diplomes/09/6/MENS1637878A_-_JO_30_du_040217-arr_fixant_liste_ecoles_accredit_titre_inge_2016_718096.pdf [accessed 17.3.2019].).

Progression opportunities for learners after graduation
  • entry to the labour market;
  • pursuing a PhD degree (EQF 8).

Possessing the title ‘qualified engineer’ (titre d’ingénieur diplômé) allows a person to work as an engineer.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

All the qualifications developed by the State can be accessed via validation of non-formal and informal learning (VAE- validation des acquis de l'expérience). VAE is the third option to access formal (VET) qualifications, mainly in adult education.

General education subjects

Information not available

Key competences

The key competences are included in the general courses that are defined (syllabi) and examined nationally ([178]Centre Inffo (2016). Key competences in vocational education and training – France. Cedefop ReferNet thematic perspectives series.
http://libserver.cedefop.europa.eu/vetelib/2016/ReferNet_FR_KC.pdf
).

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

14% ([179]2014-16) of graduates with a Master or a PhD as a share of all graduates from initial education ([180]Initial education extends from lower secondary to higher education.). National statistics do not differentiate between Master and PhD degrees, and do not specify the share of graduates with a vocational Master.

In terms of gender, there are more women than men.

Breakdown of young people at the end of initial training according to their highest diploma

Source: Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques 2018, p. 253 ([181]http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf).

EQF 6 -7

Programmes at public or private

higher colleges of excellence

degree or certificate in

business and management (State-labelled)

3 years,

ISCED 655

Degree or Master in

business and management (State-labelled)

5 years,

ISCED 756

Degree or certificate in business and management (State-labelled) leading to EQF level 7, ISCED 655 (Diplôme ou certificat d'école de commerce bac+3). Degree or Master in business and management(State-labelled)leading to EQF level 7, ISCED 756 (Diplôme ou certificat d'école de commerce bac+5).
EQF level
6 (three-year programmes) 7 (five-year programmes)
ISCED-P 2011 level

655 (three-year programmes)

756 (five-year programmes)

Usual entry grade

13 or 15 ([182]There are several types of schools of commerce and management. Some of them select students coming from two-year preparatory schools (CPGE). Others recruit directly after a baccalaureate (EQF 4):
http://www.enseignementsup-recherche.gouv.fr/cid70660/les-ecoles-de-commerce-et-de-gestion.html
)

Usual completion grade

15 - 17

Usual entry age

18 – 22 (three-year programmes)

18 (five-year programmes)

Usual completion age

21 - 23

Length of a programme (years)

3 - 5

  
Is it part of compulsory education and training?

N

(education is compulsory until age16)

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

Information not available

Is it offered free of charge?

Y

Public higher education is free

Is it available for adults?

Y

Programmes are accessible to learners over 18

ECVET or other credits
Learning forms (e.g. dual, part-time, distance)

In full time university programmes:

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • interships in companies.

In apprenticeship delivery (WBL 67%):

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.
Main providers
  • elite business and management schools (Grandes écoles) ([184]Grandes écoles are tertiary education institutions of excellence operating in limited fields (public administration, science and engineering, humanities and business administration). Access to Grandes écoles programmes is possible through a very competitive and selective admission procedure (upper secondary –Baccalaureate- graduates, pre-selected based on their school profile and grades, must undertake preparatory classes in a two-year programme with eliminatory examinations at the end of each year). Grandes écoles offering programmes leading to business and management qualifications are mainly private institutions managed by professional organisations. A State-approved qualification provides access to the LMD cycle (Licence-Master-Doctorat), whether in France or abroad. NB: Higher education in French is free, but only the State may issue university degrees and diplomas. Private HE institutions must be accredited or State-labelled, through the CEFDG (la commission d'évaluation des formations et diplômes de gestion,
    https://www.cefdg.fr/). The State-approved label is a recognition procedure conducted by the Ministry of National Education which gives the diploma the value of a national qualification. The label is granted for a maximum renewable period of six years.
    );
  • accessible through validation of non-formal and informal learning (for adults).
Share of work-based learning provided by schools and companies
  • WBL >15% in classroom-based programmes;
  • WBL 67% in apprenticeship (in-company practice).
Work-based learning type (workshops at schools, in-company training / apprenticeships)

In business and management higher education institutions (Grandes écoles) ([185]Grande écoles are tertiary education institutions of excellence operating in limited fields (public administration, science and engineering, humanities and business administration). Access to Grandes écoles programmes is possible through a very competitive and selective admission procedure (upper secondary –Baccalaureate- graduates, pre-selected based on their school profile and grades, must undertake preparatory classes in a two-year programme with eliminatory examinations at the end of each year). Grandes écoles offering programmes leading to business and management qualifications are mainly private institutions managed by professional organisations. A State-approved qualification provides access to the LMD cycle (Licence-Master-Doctorat), whether in France or abroad. NB: Higher education in French is free, but only the State may issue university degrees and diplomas. Private HE institutions must be accredited or State-labelled, through the CEFDG (la commission d'évaluation des formations et diplômes de gestion,
https://www.cefdg.fr/). The State-approved label is a recognition procedure conducted by the Ministry of National Education which gives the diploma the value of a national qualification. The label is granted for a maximum renewable period of six years.
):

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.

In apprenticeship delivery:

  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.
Main target groups
  • people over 18 in Grandes écoles;
  • people in adult education.

Grandes écoles are non-academic tertiary education institutions of excellence operating in limited fields (public administration, science and engineering, humanities and business administration). Access is possible through a very competitive and selective admission procedure ([186]Upper secondary – Baccalaureate – graduates, pre-selected based on their school profile and grades, must undertake preparatory classes in a two-year programme with eliminatory examinations at the end of each year).). Business and management Grandes écoles are mainly private institutions managed by professional organisations. There must be accredited by the State to be able to award degrees and certificates that have national validity. The label is granted for a maximum renewable period of 6 years.

Entry requirements for learners (qualification/education level, age)

There are several types of business and management schools (Grandes écoles) ([187]http://www.enseignementsup-recherche.gouv.fr/cid70660/les-ecoles-de-commerce-et-de-gestion.html):

Assessment of learning outcomes

At the end of the respective training programme, learners take an exam to obtain a VET qualification.

Diplomas/certificates provided

Degree or certificate in business and management

(Diplôme ou certificat d'école de commerce bac+3);

EQF level 7, ISCED 655.

Degree or Master in business and management;

(Diplôme ou certificat d'école de commerce bac+5) ;

EQF 7, ISCED 756.

All IVET programmes are offered, assessed and recognised by the State ([189]Higher education in French is free, but only the State may issue university degrees and diplomas. Private HE institutions must be accredited (validity is for six years) by the State, through the Commission d'évaluation des formations et diplômes de gestion (CEFDG). The State-approved label is a recognition procedure conducted by the Ministry of National Education which gives the diploma the value of a national qualification. The label is granted for a maximum renewable period of six years. Grandes écoles offering programmes leading to business and management qualifications are mainly private institutions managed by professional organisations. A State-approved qualification provides access to the LMD cycle (Licence-Master-Doctorat), whether in France or abroad.).

Examples of qualifications

Degree in marketing and management (Diplôme en gestion et marketing bac+3);

Degree in marketing, finance and international business management (Diplôme de responsible marketing, finance et commerce international bac+4);

Master in Management science (Diplôme en sciences de gestion bac+5).

135 State-labelled business and management degrees are offered nationally ([190]https://www.cefdg.fr/fr/ecoles-et-formations-visees [accessed 17.3.2019].).

Progression opportunities for learners after graduation
  • entry to the labour market;
  • move on to further studies, along the LMD model.
Destination of graduates

Information not available

Awards through validation of prior learning

N

Among these VET qualifications, only the ones registered to the national register of vocational qualifications (RNCP) are accessible through validation of prior learning (VAE).

General education subjects

Information not available

Key competences

Information not available

The key competences are included in the general courses that are defined (syllabi) and examined nationally ([191]Centre Inffo (2016). Key competences in vocational education and training – France. Cedefop ReferNet thematic perspectives series.
http://libserver.cedefop.europa.eu/vetelib/2016/ReferNet_FR_KC.pdf
).

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

2.4 % ([192]In 2017. Calculated by Centre Inffo, based on: CGE; ENSAI (2018). Insertion des diplomés des Grandes écoles [Integration of the Grandes écoles degree holders], p. 12.
https://www.cge.asso.fr/themencode-pdf-viewer/?file=https://www.cge.asso.fr/wp-content/uploads/2018/06/2018-06-19-Rapport-2018.pdf and Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques, 2018 [Benchmarks and statistics, 2018], p. 13.
https://cache.media.education.gouv.fr/file/RERS_2018/28/7/depp-2018-RERS-web_1075287.pdf
)

Post-secondary

Programme Types
Not available

Secondary

Click on a programme type to see more info
Programme Types

EQF 4

Upper secondary technological

programmes,

3 years,

ISCED 344

Technological upper secondary programmes leading to EQF level 4, ISCED level 344 (baccalauréat technologique)
EQF level
4
ISCED-P 2011 level

344

Usual entry grade

10

Usual completion grade

12

Usual entry age

16

Usual completion age

18

Length of a programme (years)

3

  
Is it part of compulsory education and training?

N

(education is compulsory until age16)

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits
Learning forms (e.g. dual, part-time, distance)
  • full-time education in VET schools;
Main providers
  • public and private education schools;
  • apprenticeship training centres (WBL 67%);
  • accessible through validation of non-formal and informal learning (for adults).
Share of work-based learning provided by schools and companies
  • WBL 0% in school-based programmes;
  • WBL 67% in apprenticeship training centres (in-company practice).
Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • in-company practice (in apprenticeship training centres)
Main target groups
  • young people between 16-18;
  • people over 18 in adult education.
Entry requirements for learners (qualification/education level, age)

All learners having completed lower secondary general education, with or without the end of lower secondary certificate (Brevet des collèges) may move on to upper secondary general, technological or vocational pathways.

Assessment of learning outcomes

At the end of the training programme, learners take an exam to obtain the technological baccalaureate.

Diplomas/certificates provided

At the end of the training programme, learners take an exam to obtain the technological baccalaureate (Baccalauréat technologique)

All IVET programmes are offered, assessed and recognised by the State.

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

The technological curriculum leads to the end of secondary education technological degree (baccalaureat technique) (EQF level 4). This degree opens up access to two-year studies in higher education to obtain a higher technician certificate (BTS) or a technological university diploma (DUT) (EQF level 5), and moving on to engineering bachelor and master studies (respectively, EQF levels 6 and 7). Those with a good high school record (baccalauréat technique, EQF 4) may also access engineering studies (EQF level 6), on the condition they follow a preparatory class ([132]http://www.education.gouv.fr/cid2604/la-voie-technologique-au-lycee.html).

Destination of graduates

Information not available

Awards through validation of prior learning

Y

All the qualifications developed by the State can be accessed via validation of non-formal and informal learning (VAE, validation des acquis de l'expérience). VAE is the third option to access formal (VET) qualifications, mainly in adult education.

General education subjects

Y

The first year (grade 10) is common with the general upper secondary stream (general subjects); in grades 11 and 12 students prepare mainly for higher VET studies (BTS and DUT).

There are eight different specialisations in grades 11 and 12.

In grade 12, learners may choose between four streams:

Key competences

The key competences are included in the general courses that are defined (syllabi) and examined nationally ([134]Centre Inffo (2016). Key competences in vocational education and training – France. Cedefop ReferNet thematic perspectives series.
http://libserver.cedefop.europa.eu/vetelib/2016/ReferNet_FR_KC.pdf
)

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

6% ([135]2014-16.) of graduates with a technological baccalaureate as a share of all graduates from initial education ([136]Initial education extends from lower secondary to higher education.)

In terms of gender, there are more women than men.

 

Breakdown of young people at the end of initial training according to their highest diploma

Source: Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques 2018, p. 253 ([137]http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf).

 

Upper secondary VET

programmes,

WBL ca 50%,

2 or 3 years

ISCED 353,354

Upper secondary vocational programmes in VET schools leading to EQF level 3 or 4, ISCED 353 or 354 (lycées professionnels).
EQF level
3 (professional skills certificate, CAP) 4 (vocational Baccalaureate, BAC-pro, or BMA-applied arts certificates)
ISCED-P 2011 level

353 (professional skills certificate, CAP)

354 (vocational baccalaureate, BAC-pro, or BMA-applied arts certificates)

Usual entry grade

10

Usual completion grade

11 (professional skills certificate, CAP)

12 (vocational Baccalaureate, BAC-pro, or BMA-applied arts certificates)

Usual entry age

16

Usual completion age

17 (professional skills certificate, CAP)

18 (vocational Baccalaureate, BAC-pro, or BMA-applied arts certificates)

Length of a programme (years)

2 (professional skills certificate, CAP)

3 (vocational baccalaureate, BAC-pro, or BMA-applied arts certificates)

  
Is it part of compulsory education and training?

N

(education is compulsory until age16)

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits
Learning forms (e.g. dual, part-time, distance)

In schools (WBL 50%):

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work, workshops, indoor and outdoor;
  • project work;
  • internships in companies.

In apprenticeship training centres (CFAs) (WBL 67%):

  • classroom theoretical vocational learning;
  • practical training in the form of courses, practical work workshops, indoor and outdoor;
  • project work;
  • internships in companies.
Main providers
  • public and private education schools;
  • apprenticeship training centres (CFAs);
  • accessible through validation of non-formal and informal learning (for adults).
Share of work-based learning provided by schools and companies
  • WBL 50% in school-based programmes;
  • WBL 67% in apprenticeship training centres (CFAs) (in-company practice).
Work-based learning type (workshops at schools, in-company training / apprenticeships)

In schools:

  • practical training in the form of courses, practical work, workshops, indoor and outdoor
  • project work;
  • internships in companies.

In apprenticeship training centres (CFAs):

  • practical training in the form of courses, practical work, workshops, indoor and outdoor
  • project work;
  • internships in companies.
Main target groups
  • young people between 16-18;
  • people over 18 in adult education.
Entry requirements for learners (qualification/education level, age)

All learners having completed lower secondary general education, with or without the end of lower secondary certificate (Brevet des collèges) may move on to upper secondary general, technological or vocational pathways.

Assessment of learning outcomes

At the end of the training programme, learners take an exam to obtain the technological baccalaureate.

Diplomas/certificates provided

There are two programme cycles in the upper secondary vocational stream.

In two years, learners may prepare a professional skills certificate (CAP, certificat d’aptitude professionnelle); in a third year, those with a CAP may prepare:

  • an advance diploma (BM - brevet de maîtrise, or
  • a BMA-applied arts certificate (brevet des arts et métiers).

In a three-year programme learners may prepare a vocational baccalaureate (BAC–pro, baccalauréat professionnel)

All IVET programmes are offered, assessed and recognised by the State.

Examples of qualifications
  • security officer (agent de sécurité) (CAP), EQF 3
  • baker-pastry cook (boulanger-pâtissier) (Bac-Pro), EQF4
  • cabinetmaker (ébéniste) (BMA), EQF 4

Up to 200 CAP specialities ([139]CAP, certificat d’aptitude professionnelle [professional skills certificate]:
http://eduscol.education.fr/cid47637/le-certificat-d-aptitude-professionnelle-cap.html
); 100 BAC-pro specialities ([140]Baccalauréat professionnel [vocational baccalaureate], EQF 4:
http://eduscol.education.fr/cid47640/le-baccalaureat-professionnel.html [accessed 15.3.2019].
) and 20 BMA specialities ([141]BMA, Brevet des métiers d’arts [applied arts certificate]:
http://eduscol.education.fr/cid47643/le-brevet-des-metiers-d-art-bma.html [accessed 15.3.2019].
) are available.

Progression opportunities for learners after graduation

The professional skills certificate- CAP (Certificat d’ aptitude professionnelle) (EQF 3) ([142]http://eduscol.education.fr/cid47637/le-certificat-d-aptitude-professionnelle-cap.html [accessed 15.03.2019]) demonstrates a first level of qualification to its holder as qualified worker or employee in a given employment sector. CAP provides direct access to employment and/or to upper secondary vocational studies (EQF level 4) in order to prepare for a brevet de maitrise (BM – advanced diploma) or a vocational baccalaureate, either at school or through an apprenticeship.

The vocational baccalaureate (Baccalauréat professionnel, EQF 4) is a qualification that allows successful candidates to enter a profession. Access to tertiary VET in selected fields is also possible to prepare an advanced technician certificate (BTS) in an advanced technician sector or an undergraduate certificate of technology (DUT) in university technology institutes (IUTs) (EQF level 5). Prior VET knowledge may be recognised affecting programme duration.

BMA (Brevet des métiers d’arts - Applied Arts certificate) ([143]http://eduscol.education.fr/cid47643/le-brevet-des-metiers-d-art-bma.html) is a national qualification in a specific skill, which aims to preserve and pass on traditional techniques while promoting innovation. It is available to holders of a CAP in the same professional sector. The programme consists of vocational training specific to each BMA speciality, general education, and work placements lasting between 12 and 16 weeks. It gives direct access to employment.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

All the qualifications developed by the State can be accessed via validation of non-formal and informal learning (VAE- validation des acquis de l'expérience). VAE is the third option to access formal (VET) qualifications, mainly in adult education.

General education subjects

Y

Vocational programmes provided for pupils in vocational lycées (high schools) combines general education with a high level of specialised technical knowledge ([144]French referencing report to the European qualifications framework for lifelong learning, 2010:
https://ec.europa.eu/ploteus/sites/eac-eqf/files/Report-FR-NQF-EQF-VF.pdf
).

Key competences

The key competences are included in the general courses that are defined (syllabi) and examined nationally ([145]Centre Inffo (2016). Key competences in vocational education and training – France. Cedefop ReferNet thematic perspectives series.
http://libserver.cedefop.europa.eu/vetelib/2016/ReferNet_FR_KC.pdf
).

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

In 2018, one-third of upper secondary students (665 000) are enrolled in the vocational stream.

In years 2014-2016 the share of VET graduates compared to all graduates from initial education ([146]Initial education extends from lower secondary to higher education.) was:

  • 11% ([147]2014-16) for those with a CAP or equivalent EQF level 3 qualification;
  • 17% ([148]2014-16) for those with a vocational baccalaureate or equivalent EQF level 4 qualification.

In terms of gender, there are more men than women.

 

Breakdown of young people at the end of initial training according to their highest diploma

Source: Ministry of National Education, Higher Education and Research (2018). Repères et références statistiques 2018, p. 253 ([149]http://cache.media.education.gouv.fr/file/RERS_2018/31/0/depp-2018-RERS-web_1007310.pdf).

 

VET available to adults (formal and non-formal)

Click on a programme type to see more info
Programme Types

Certificates of

professional qualifications (CPQ)

continuing vocational training

(lifelong learning) programmes

Certificates of professional qualifications (Certificats de qualification professionnelle - CQP). Certificates of professional qualifications may be acquired as part of an apprenticeship, in different continuing training programmes and through validation of prior learning. They are accessible through a variety of programmes designed for different learner group (the unemployed, employees, the self-employed, specific groups etc.).
EQF level
Not applicable
ISCED-P 2011 level

Not applicable

Usual entry grade

Not applicable

Usual completion grade

Not applicable

Usual entry age

People in adult education (over 18 who have left initial education and training)

Usual completion age

Not applicable

Length of a programme (years)

Information not available

  
Is it part of compulsory education and training?

N

(education is compulsory until age16)

Is it part of formal education and training system?

Information not available

Is it initial VET?

N

Is it continuing VET?

Y

Continuing vocational programmes are lifelong learning programmes (formation tout au long de la vie) for adults.

Is it offered free of charge?

Y

There is a variety of training schemes preparing CQPs, mostly targeting jobseekers and employed people. CVET is mostly financed by employers’ contributions; training courses are most of the time free for beneficiaries (or taken as part of the individual right to training (the so-called compte personnel de formation – CPF).

Is it available for adults?

Y

Continuing vocational programmes are lifelong learning programmes (formation tout au long de la vie) for adults.

ECVET or other credits
Learning forms (e.g. dual, part-time, distance)

Certificates of professional qualifications (CQP) enable employees to acquire an operational qualification. The credential may be granted by:

  • a ‘professionalisation contract’ (one of the two existing alternance training programmes, with the apprenticeship contract);
  • continuing training;
  • through validation of non-formal and informal learning (VAE - validation des acquis de l’experience) if the CQP is registered in the national register of vocational qualifications (RNCP).

The CQP are recognised by the collective or branch agreement it relates to; it is thus created and issued within an industry sector by a joint industry body, usually the CPNE (National Joint Employment Committee).

The CQP can only be accessed through lifelong learning programmes and training is usually provided by a body created and managed by the branch in question. As of 2019, these certificates are under the responsibility of France compétences.

The CQPs are not attached to a level of qualification, but are classified separately (when registered) in the national register of vocational qualifications (RNCP), by sector of activity.

Main providers

The training market is free.

Certificates of professional qualifications (CQP) enable employees to acquire an operational qualification. A CQP, recognised by the collective or branch agreement it relates to, is thus created and issued within an industry sector by a joint industry body, usually the CPNE (National Joint Employment Committee) ([194]Article L6113-4 of the Labour Code:
https://www.legifrance.gouv.fr/affichCodeArticle.do;jsessionid=80F0D87426DBC7277F61C5EF06EF7E4C.tplgfr37s_1?cidTexte=LEGITEXT000006072050&idArticle=LEGIARTI000037374062&dateTexte=20181005&categorieLien=cid#LEGIARTI000037374062
).

  • they can only be accessed through lifelong learning programmes and training is usually provided by a body created and managed by the branch in question;
  • accessible through validation of non-formal and informal learning (VAE – validation des acquis de l’ expérience) is also possible.
Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

In CVET, programmes target

  • young people not in initial education and training;
  • the unemployed (job seekers);
  • employees.
Entry requirements for learners (qualification/education level, age)

CVET training offer is designed (and then financed) on the basis of the status (unemployed, job seeker, employee etc.). of the beneficiary. Programmes that lead to a CQP are available through:

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Certificates of professional qualifications (CQPs – certificats de qualification professionnelle).

Up to 2018, CQPs are not attached to a level of qualification, but are classified separately in the national register of vocational qualifications (RNCP), by sector of activity ([196]http://www.cncp.gouv.fr/site/cncp/Accueil35701/Repertoire). The 2018 Bill ([197]And Decree No 14 of 8 January 2019, implementing provisions of the 2018 Bill (Chapter IV, Article 31).) foresees that, from 2019 onwards, all vocational qualifications included in RNCP will be (gradually) associated with a level of qualification in the national nomenclature (NQF levels V to I/EQF levels 3 to 8). France Compétences ([198]New governance and monitoring body responsible for VET implementation and financing:
https://travail-emploi.gouv.fr/ministere/acteurs/agences-et-operateurs/article/france-competences
) assuming the responsibilities of the national commission of vocational certifications (CNCP) is in charge of the process.

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Information not available

Destination of graduates
  • (re)entry to the labour market;
  • progress in own career;
  • career mobility.
Awards through validation of prior learning

All vocational qualifications registered in the RNCP (this includes all formal qualifications issued by the State and those recognised by the social partners) can also be accessed via validation of non-formal and informal learning.

General education subjects

Information not available

Key competences

N

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

Professional diploma

(titre professional)

continuing vocational training

(lifelong learning) programmes

‘Professional diploma’ (Titre professionnel). Professional diplomas are accessible through a variety of programmes designed for different groups of learners (the unemployed, employees) (see section learning form). They may be acquired as part of an apprenticeship, in continuing training and through validation of prior learning.
EQF level
3-6
ISCED-P 2011 level

Information not available

Usual entry grade

Not applicable

Usual completion grade

Not applicable

Usual entry age

People in adult education (over 18 who have left initial education and training)

Usual completion age

Not applicable

Length of a programme (years)

Information not available

  
Is it part of compulsory education and training?

N

(education is compulsory until age16)

Is it part of formal education and training system?

N

Is it initial VET?

N

Is it continuing VET?

Y

Continuing vocational programmes are lifelong learning programmes (formation tout au long de la vie) for adults.

Is it offered free of charge?

There is a variety of training schemes preparing Titre professionel [professional diploma], mostly targeting job seekers and employed people. CVET is mostly financed by employers’ contributions; training courses are most of the time free for beneficiaries (or taken as part of the individual right to training (the so-called compte personnel de formation, CPF).

Is it available for adults?

Y

Continuing vocational programmes are lifelong learning programmes (formation tout au long de la vie) for adults

ECVET or other credits
Learning forms (e.g. dual, part-time, distance)

The credential may be granted by

  • apprenticeship;
  • continuing training;
  • through validation of non-formal and informal learning (VAE - validation des acquis de l’ experience).

The ‘Titre professionnel’ [professional diploma] is a State certificate designed and issued by the Ministry of Labour. It certifies that his holder masters the skills, abilities and knowledge necessary to perform a job. It enables the acquisition of specific professional skills to support employability and professional development of workers ([200]In 2017, 7 out of 10 job seekers found a job after obtaining a titre professionnel.).

This qualification is made up of modules (blocks of competences ([201]CCP: certificats de compétences professionnelles.). From 1 January 2019, it become mandatory that all RNCP ([202]RNCP: Répertoire National des Certifications Professionnelles [the national register of vocational qualifications].) vocational qualifications are structured into skills set (blocs de compétences) ([203]Α skills set is a minimum, homogeneous and coherent set of competences contributing to the autonomous exercise of a professional activity that can be credited.), therefore these certificates are already compatible with the new arrangements.

They cover all sectors (building, human services, transport, catering, commerce, industry, etc.) and different levels of qualification (EQF levels 3 to 6).

Main providers

The training market is free.

Professional diplomas are certificates issued by the Ministry of Labour certifying that the holder masters the skills, abilities and knowledge necessary to perform a job. They enable the acquisition of specific professional skills to support employability and professional development of workers.

  • they can be accessed through lifelong learning programmes and training is usually provided by semi-public and public training providers like the National association for adult vocational training (AFPA) ([204]Association pour la formation des adultes:
    https://www.afpa.fr/
    ) or the Consortium of local public education institutions (GRETA) ([205]Groupements d’Établissements:
    https://www.education.gouv.fr/cid261/les-greta.html
    )
  • They may be delivered as apprenticeships offered by apprenticeship training centres;
  • accessible through validation of non-formal and informal learning (VAE – validation des acquis de l’ expérience) is also possible
Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

In CVET, programmes target

  • young people not in initial education and training;
  • the unemployed (job seekers);
  • employees.
Entry requirements for learners (qualification/education level, age)

CVET training offer is designed (and then financed) on the basis of the status (unemployed, job seeker, employee etc.) of the beneficiary. Programmes that lead to a professional qualification are available through:

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Professional diploma (Titre professionnel)

Professional diplomas are listed in RNCP which includes all nationally recognised vocational qualificationsThe 2018 Bill ([207]And Decree No 14 of 8 January 2019, implementing provisions of the 2018 Bill (Chapter IV, Article 31).) foresees that, from 2019 onwards, all vocational qualifications included in RNCP will be (gradually) associated with a level of qualification in the national nomenclature (NQF levels V to I/EQF levels 3 to 8). France Compétences ([208]New governance and monitoring body responsible for VET implementation and financing:
https://travail-emploi.gouv.fr/ministere/acteurs/agences-et-operateurs/article/france-competences
) - assuming the responsibilities of the national commission of vocational certifications (CNCP) - is in charge of the process.

Examples of qualifications

driving school instructor (enseignant de la conduite et de la sécurité routière); fitters assembler in aviation (monteur câbleur en aéronautique); driver in building, civil engineering works (conducteur de travaux du bâtiment et du génie civil).

By end of 2017, 249 professional diplomas were available in:

  • building and public work (35%);
  • industry (35%);
  • transport and logistics (6%);
  • trade and distribution (6);
  • other services (21%).

Overview of professional diplomas in 2017 (in French) ([209]https://travail-emploi.gouv.fr/IMG/pdf/bilan-titresprofessionnels2017.pdf)

Progression opportunities for learners after graduation

Information not available

Destination of graduates
  • (re)entry to the labour market;
  • progress in own career;
  • career mobility.
Awards through validation of prior learning

All vocational qualifications registered in the RNCP (this includes all formal qualifications issued by the State and those recognised by the social partners) can also be accessed via validation of non-formal and informal learning.

General education subjects

Information not available

Key competences

N

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

General themes

Luxembourg’s education system (including VET) is shaped by the country’s political, economic, demographic and linguistic particularities, and strongly influenced by its:

  • relatively small territory;
  • multinational population and workforce: almost half of the country’s population have are foreign citizens (47%), among them the largest group being Portuguese (16%) and 24.6% from other European Union countries;
  • multilingualism: there are three official languages (German, French and Luxembourgish);
  • fast growing number of inhabitants since 1991 (the population has increased by 50% to a total of 602 000 inhabitants in 2018).

Distinctive features of VET ([1]Cedefop (2017.) Spotlight on vocational education and training in Luxembourg. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8112_en.pdf
)

Social partner involvement is a core principle in VET policy. The professional chambers act as independent policy institutes; they are represented in the tripartite advisory committee on vocational training and consulted on VET legislation. The 2008 reform reinforced their role, which includes involvement in developing and revising VET programmes. They also accompany enterprises and apprentices through practical training and organise CVET.

Learners have an opportunity to follow cross-border apprenticeship to acquire qualifications that Luxembourg’s education system cannot offer; the number of learners is not always sufficient given the small size of the country. Practical training in a company based in Luxembourg is combined with learning at school in one of the neighbouring countries. Teaching in vocational programmes has been based on units and modules since the VET reform of 2008, which was implemented until 2013/14 ([2]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle]. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
). Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Learner progression to general education or (pre-) VET in secondary education is guided based on achievements and interests, parents’ opinions and the view of education staff, including a (pre-) VET representative.

Close ties with neighbouring countries, multilingualism in all spheres of life and the high share of foreign citizens with a mother tongue other than one of the three official languages have a strong impact on VET. Luxembourg provides more language training than any other country, in terms of both the number of foreign languages studied per learner and time spent in learning. Multilingualism is a strength but also a challenge: the official language used varies, depending on the type and level of education and training.

Tackling youth unemployment and investment in skills are high on the policy agenda. Reinforced stakeholder involvement and youth guarantee measures aim to match young people’s skills/qualifications better to labour market demand, and to target the low-skilled. In line with the Europe 2020 headline targets, national policies focus on keeping the share of early leavers from education and training below 10%. One of the challenges is to ensure education and training equity, irrespective of origin or socioeconomic status. One of the education ministry’s priorities is to ensure a diversified offer to meet the needs of increasingly heterogeneous target groups. Implementation of the 2008 VET reform has revealed weaknesses in the system. Bringing about change was difficult: adapting to new realities was challenging for institutions, teachers and learners. Amendments to current legislation were developed to fine-tune the reform. The law of 22 June 2017 art. 12) which gives its legal basis to the House of Guidance (Maison de l’orientation) also foresees that each secondary school should develop its own clear and general guidance approach.

To give learners better opportunities in the labour market, the education ministry is expanding the apprenticeship offer in vocational and technician programmes.

There is a need for stronger links between the world of education and training and that of work. Emphasis has been put on dovetailing in-company and school-based training phases, and on strengthening on-the-job training requirements. In collaboration with professional chambers, the government promotes implementation of quality assurance in work-based learning. This implies defining the process that will ensure better quality without disrupting doing business.

Data from VET in Luxembourg Spotlight 2017 ([3]Cedefop (2017) Spotlight on vocational education and training in Luxembourg. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8112_en.pdf
).

Population in 2018: 602 005 ([4]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 28.1.2019].)

It increased by 12.1% since 2013 due to immigration ([5]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 28.1.2019].).

Luxembourg's population growth is mainly due to immigration, as the natural balance is relatively low. The share of foreigners in Luxembourg's total population is growing steadily.

As in many other EU countries, the population is ageing.

The old-age dependency ratio ([6]Old-age-dependency ratio is defined as the ratio between the number of persons aged 65 and more over the number of working-age persons (15-64). The value is expressed per 100 persons of working age (15-64).) is expected to increase from 21 in 2015 to 44 in 2060

 

Population forecast by age group and old-age-dependency ratio

Source: Eurostat, proj_15ndbims [extracted 6.05.2019].

 

Demographic changes have an impact on VET.

In 2018, Luxembourg had 602 005 inhabitants. Since 1991 the population has increased by 50% mainly due to immigration, which has a major impact on VET.

The figure below shows that 47% of the country’s population are foreign citizens ([7]Foreign citizens residing in Luxembourg can obtain Luxembourgish nationality by naturalisation. Legislation requires them to attend citizenship training and to pass an oral Luxembourgish language exam.). Their share has more than doubled in the past 25 years. In the first half of the 1960s most of the immigrants came from Italy. However, since 1966, the immigrant population from Portugal increased from 1 100 to 82 400 in 2011 ([8]The latest population census available from 2011.) and became the largest in the country. In 2018, the Portuguese community was 96 800 inhabitants (16.0%).

 

Population structure by nationality - 2018 (%)

Source: Statec 2018- Table b1101 [accessed 30.7.2018].

 

The share of the population with a foreign nationality and a mother tongue other than the official German, French and Luxembourgish languages is high. Multilingualism is one of the country’s strengths but it is also a challenge for education and training. The high share of foreign nationals requires education and training and labour market integration policies. A public agency for integration (Office Luxembourgeois de l'Accueil et de l'Intégration) under the auspices of the Ministry of Family, Integration and the Greater Region implements this policy. This includes providing information on training in the official languages and information about the recognition of foreign diploma and secondary general education ([9]General education is nationally referred to as ‘classical education.) and VET certificates and reports ([10]This information is also easily accessible at
www.guichet.lu and
www.lifelong-learning.lu [accessed 23.1.2019].
).

The economy has undergone structural changes in the past two decades (see Figure below). The industrial economy evolved into a service economy with jobs that often require tertiary level qualifications. Employment in the industrial sector decreased from 16.9% in 1997 to 9.0% in 2017. The service, professional, scientific and technical sectors and the administrative and support service sectors have had the highest growth, from 9.0% to 16.1%. Adapting VET provision to the constantly changing employment structure has been a challenge. In 2017, more than 40% of employment was concentrated in the following sectors:

  • wholesale and retail trade;
  • transport and storage;
  • accommodation and food service activities;
  • public administration and other public services.

The public administration includes civil servants and public employees from the State and municipalities and permanent staff from national railways. In 2016, there were approximately 11 204 teachers; 4 931 of these were in secondary general and technical education ([11]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

 

Employment by activity sector in 1997 and 2017 (%)

Source: Statec 2018 Table - B3003 Emploi salarié intérieur par branche d'activité - données désaisonnalisées 1997-2017

 

Access to skilled craftsperson and commercial activities and some liberal professions is regulated.

Commercial activities and skilled craftsmanship in the territory require a business permit, issued if the manager satisfies qualification requirements and professional integrity. Qualification requirements for skilled craftsperson companies differ depending on the trade. For main craft trades such as baker/confectioner, dental technician, specialist in mechatronics, the manager must have a master craftsperson certificate (brevet de maîtrise) or a bachelor degree (if not linked to the core business it should be complemented with at least two years of professional experience), or a vocational aptitude diploma (diplôme d'aptitude professionnelle, DAP) completed by managing experience of six years in the field. For secondary craft trades such as dry-cleaner/launderer, heating mechanic, the manager must have a DAP or similar in a related field or three years’ professional experience in the activity.

Total unemployment ([12]Percentage of active population, 25 to 74 years old.) (2017): 5.6% (7.6% in EU28), it increased by 1.4 percentage points since 2007 ([13]Eurostat table tps00203 [extracted 25.1.2019].).

 

Unemployment rate (aged 15-24 and 25-64) by education attainment level in 2008-18 ([14]Time series for the 15-24 group must be considered with caution due to the small number of observations taken into account.)

NB: Data based on ISCED 2011; breaks in time series.
ISCED 0-2 = less than primary, primary and lower secondary education.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_urgaed [extracted 16.05.2019].

 

Unemployment differed between those with low- and high-level qualifications only slightly for the age group 25-64 during 2008-18. In 2018 it was the lowest for VET graduates at ISCED levels 5-8 (4.1%) and highest for those at ISCED level 0-2 (6.5%). Since 2008 the unemployment rate of the age group 25-64 has increased for ISCED level 0-2 (by 1.7 percentage points) and 5-8 (1.9 pp.) but remained stable for VET graduates at ISCED level 3-4.

The age group 15-24, however, faced a much higher risk of unemployment during those years (2008-18), especially those having only ISCED level 0-2 who suffered unemployment of 22.4-19.9%.

Employment of 20 to 34-year-old VET graduates is high rate, but decreased between 2014 and 2018, from 88.6% to 81.6%. However, it was always higher than the EU-28 average which was 76.9% in 2014 but increased to 80.5% in 2018.

 

Employment rate of VET graduates (20 to 34 years old, ISCED levels 3 and 4) ([15]Time series must be considered with caution due to the small number of observations taken into account.)

NB: Data based on ISCED 2011; breaks in time series.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education
Source: Eurostat, edat_lfse_24 [extracted on 16.05.2019]

 

The employment rate of VET graduates (20 to 34 years old, ISCED levels 3 and 4) ([16]Time series must be considered with caution due to the small number of observations taken into account.) decreased between 2014 and 2018 by 7.5 percentage points; it increased from 76.9% to 80.5% across the EU-28.

The employment rate of all graduates aged 20 to 34 years was 85% in 2014 and decreased by 1.3 percentage points to 83.7% in 2018. Whereas the employment rate of VET graduates was still above that of all graduates in 2014, in 2018 the employment rate of VET graduates was the below that of all graduates ([17]NB: Break in series. Eurostat table edat_lfse_24 [extracted 16.5.2019].).

Among the working population aged 25-64, 41.9% had ISCED level 5-8, above the EU-28 average of 32.2%, but only 32.8% had ISCED level 3-4, 12.9 percentage points below the EU-28 level. 20.4% of the population only had a low or no qualification (ISCED 0-2), 1.4 percentage points below the EU-28 average.

 

Population (aged 25 to 64) by highest education level attained in 2018

NB: Data based on ISCED 2011. Low reliability for ‘No response’ in Czechia, Iceland, Latvia, and Poland.
ISCED 0-2 = less than primary, primary and lower secondary education.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_pgaed [extracted 16.05.2019].

 

Share of learners in VET by level in 2016

lower secondary

upper secondary

post-secondary

Not applicable

61.0%

100%

Source: Eurostat, educ_uoe_enrs01, educ_uoe_enrs04 and educ_uoe_enrs07 [extracted 31.1.2019].

 

Share of initial VET learners from total learners at upper-secondary level (ISCED level 3), 2016

NB: Data based on ISCED 2011; not applicable for Ireland.
Source: Eurostat, educ_uoe_enrs04 [extracted 31.1.2019].

 

In 2016/17, in lower, middle and upper technical secondary programmes (27 221 learners), there were more males (53%) than females (47%).

The share of early leavers from education and training has fallen from 7.7% in 2009 to 6.3% in 2018. It is below the national target for 2020 of no more than 10%, and the EU-28 average of 10.6% (2018).

 

Early leavers from education and training in 2009-18

NB: Share of the population aged 18 to 24 with at most lower secondary education and not in further education or training; break in series.
Source: Eurostat, edat_lfse_14 [extracted 16.5.2019] and European Commission: https://ec.europa.eu/info/2018-european-semester-national-reform-programmes-and-stability-convergence-programmes_en [accessed 14.11.2018].

 

However, these data are subject to important variations due to the small sample size in the country and may not allow easy identification of the causes of early school leaving at national level. In response to the lack of reliable data, the national education authorities produce annual statistics based on administrative data and on a survey of early school leavers. These data indicate a higher early leaving rate for those up to age 25 (13.5%) ([18]MENJE (2017b). Le décrochage scolaire au Luxembourg, année scolaire 2014-2015 [School drop out in Luxembourg, school year 2014/15]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/secondaire/statistiques-analyses/decrochage-scolaire/decrochage-14-15/index.html
) for 2015 than the rate calculated via the labour force survey for this year. The share of early leavers is relatively high among the migrant population, especially for those not having one of the three national languages as mother tongue.

Lifelong learning offers training opportunities for adults, including early leavers from education.

 

Participation in lifelong learning in 2014-18

NB: Share of adult population aged 25 to 64 participating in education and training; break in series.
Source: Eurostat, trng_lfse_01 [extracted on 16.05.2019]

 

Participation in lifelong learning in Luxembourg has been increasing in the past decade. While it was at 14.5% in 2014, it increased to 18.0% in 2018, almost seven percentage points above the EU-28 average.

 

VET learners in secondary education by age group

NB: VET learners include learners from lower, medium and upper technical secondary education

Source: National data.

 

The education and training system comprises:

  • pre-school education (ISCED level 0);
  • primary and lower secondary education (ISCED levels 1 and 2);
  • upper secondary education (ISCED level 3);
  • post-secondary non-tertiary education (ISCED level 4);
  • higher education (ISCED levels 5, 6, 7 and 8).

School attendance is compulsory between 4 and 16, i.e. for at least 12 years, including two years of pre-school education. At the end of primary education (enseignement primaire), learners receive an end-of-cycle report, stating the level attained for each competence domain. Learners are guided towards either general or vocational secondary education by dedicated councils, which include a teacher working in VET ([19]Following the Law of 29 August 2017 (SCL, 2017d) on secondary education ‘general secondary education’ is nationally referred to as ‘classical secondary education’ (éducation secondaire classique - ESC) while ‘technical secondary education’ is referred to as ‘general secondary education’ (éducation secondaire générale - ESG). However, to allow comparison at EU level, the previous terminology will be kept.). The guidance takes account of learning achievement (based on the end-of-cycle report), parent and teacher opinions and performance in standardised basic skills tests (in relation to the national average).

Secondary education comprises two types with different objectives:

- general secondary education (enseignement secondaire classique ESC) which conveys general knowledge in humanities, mathematics and natural sciences and prepares for higher education studies;

- vocational secondary education, nationally referred to as technical secondary education (enseignement secondaire général) which gives access to higher education and/or to the labour market.

Various programmes at post-secondary and tertiary levels are available as general; others as vocational pathways ([20]Based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

The Luxembourgish VET system comprises initial and continuing VET which are composed of several VET learning options:

  • school-based learning;
  • practical training at school;
  • in-company training in form of apprenticeship or short term work placements.

The dual system is an important feature of secondary VET (hereafter referred to as technical secondary education), which implies a strong relationship between school-based education and work-based learning in enterprises.

In technical secondary education (enseignement secondaire général, ISCED 353 and 354) learners are prepared both for professional life and enrolment in higher education. It is divided into three cycles:

(a) the lower cycle (cycle inférieur);

(b) the medium cycle (cycle moyen);

(c) the upper cycle (cycle supérieur).

A preparatory programme (programme préparatoire) supports learners who find it difficult to adapt to secondary education.

After successful completion of the lower cycle, learners can choose between technical, vocational and technician programmes. Depending on the programme, duration varies between six and eight years. Since 2013/14, all technical secondary programmes are based on principles implemented with the 2008 VET reform, providing also the possibility for learners to move from one type of secondary education to another. Tuition is in French, German and Luxembourgish.

Depending on the occupation, secondary VET programmes may be provided in technical secondary schools or in mixed schools that offer both technical and general secondary education. While most VET learners in 2016/17 attended public schools (86.9%), some were enrolled in private schools that apply national curricula (12.1%) or in private/international schools that do not apply them (1%).

Lower cycle

The lower cycle of technical secondary education (ISCED 244, EQF 1) is considered as pre-VET and lasts three years. It offers learners an orientation phase in which they can decide on their further education pathway. Upon successful completion, they can continue in the medium cycle of technical, technician or vocational programmes.

Practical activities in workshops make up an important part of the technical secondary programmes and focus on supporting learners in choosing their career.

Depending on their performance at the end of primary school, learners are directed to a preparatory (préparatoire) or orientation (orientation) path.

Medium and upper cycles

The medium and upper cycles of technical secondary education offer (mainly) school-based VET programmes, apprenticeships and similar schemes. Learners acquire occupational qualifications for which a certificate or a diploma is awarded. Schooling includes various training schemes, which last from six to eight years, depending on the chosen orientation. There are four different programmes within these cycles:

(a) technical programmes (régime technique) leading to a technical secondary school leaving diploma (diplôme de fin d’études secondaires générales) (ISCED 354, EQF 4);

(b) vocational programmes leading to a vocational capacity certificate (certificat de capacité professionnelle, CCP) (ISCED 353, EQF 2);

(c) vocational programmes leading to a vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) (ISCED 353, EQF 3);

(d) technician programmes (régime de la formation de technicien) leading to a technician diploma (diplôme de technicien, DT) (ISCED 354, EQF 4).

Learners can choose between three different training programmes which (can) include an apprenticeship contract and lead to different qualifications:

  • vocational capacity certificate (certificat de capacité professionnelle, CCP) at EQF level 2 always includes an apprenticeship contract. This programme is designed for learners facing difficulties in being accepted on another programme and lead to semi-skilled worker skills ;
  • vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) at EQF level 3 can be done under an apprenticeship contract or an internship contract. They provide the graduate access to the labour market as a skilled worker;
  • technician programme (diplôme de technician, DT) at EQF level 4 which are school-based and include a job placement of 12 or more weeks. They are mostly organised under an internship contract but can also be organised under an apprenticeship contract. This programme offers in-depth and diversified competences and a higher part of general education than the vocational programmes.

Learners are responsible for finding a training place in an enterprise. The vocational guidance service of the public employment service (Agence pour le Développement de l'Emploi, ADEM) supports young people through counselling and a central register of all available apprenticeship places.

Once the learner has signed a contract with a company, (s)he has the legal status of an apprentice and receives an apprenticeship allowance which varies between EUR 400 and 1 300 depending on the trade/profession learned ([21]https://www.lllc.lu/fr/formation-professionnelle-initiale/indemnites-d-apprentissage-nouveau-regime-dt-dap-ccp). Upon successful completion of an academic year, learners receive a premium allowance based on a monthly rate of EUR 130 for CCP or EUR 150 for DAP and DT. The best apprentices receive an award which also includes a prize of EUR 1 500.

Enterprises offering apprenticeship places need to comply with certain criteria, verified by the professional chambers. Financial support and an award to encourage their engagement are available. VET trainers, who receive special training, supervise the apprentices in the training companies. In accordance with the amended VET legislation of 2008, an apprenticeship is based on key principles such as:

• qualitative assessment of learning outcomes (transcript of acquired and non-acquired skills rather than marks in figures);

• modular system allowing apprentices who fail a required module to continue their training and catch up at a later stage during their apprenticeship ([22]Cedefop (2017.) Spotlight on vocational education and training in Luxembourg. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8112_en.pdf
).

Learn more about apprenticeships in the national context from the European database on apprenticeship schemes by Cedefop: http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/apprenticeship-schemes/scheme-fiches

The Ministry of National Education, Children and Youth ([23]Ministère de l'Éducation Nationale, de l’Enfance et de la Jeunesse (MENJE). Hereinafter referred to as education ministry.) is responsible for all types of education, including initial and continuing VET. Initial and continuing higher education is under the Ministry of Higher Education and Research ([24]Ministère de l'Enseignement Supérieur et de la Recherche (MESR). Hereinafter referred to as higher education ministry.). In cooperation with the Ministry of Labour, Employment and the Social and Solidarity Economy ([25], Ministère du Travail, de l’Emploi et de l’Économie Sociale et Solidaire (MTE). Hereinafter referred to as labour ministry.), the Ministry of National Education, Children and Youth is also responsible for training measures for the unemployed.

Higher education is under the responsibility of the higher education ministry.

Cooperation between the State and the social partners is a core principle in VET. As stated in the law reforming VET ([26]SCL (2008). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273–3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
), social partners are essential stakeholders who contribute to its organisation and implementation. The professional chambers’ opinion is systematically sought on laws and regulations on economic, financial and social policy: labour law, social security, taxation, the environment, initial and continuing vocational training, and education. Development and periodic revision of programmes are ensured by curriculum teams.

There are five professional chambers in Luxembourg. The Chamber of Commerce ([27]Chambre de Commerce.), Chamber of Trades and Skilled Crafts ([28]Chambre des Métiers.) and Chamber of Agriculture ([29]Chambre d’Agriculture.) represent employers. The Chamber of Employees ([30]Chambre des Salariés.), and Chamber of Civil Servants and Public Employees ([31]Chambre des Fonctionnaires et Employés Publics.) represent wage earners. These chambers act as independent policy institutes; they are involved in Luxembourg’s legislative procedures and are officially consulted on education matters. They are represented both at national (Economic and Social Council, Tripartite Advisory Committee on Vocational Training) and at European level (Cedefop Governing Board, Advisory Committee on Vocational Training). In contrast to trade unions and employers’ associations, membership in the professional chambers is compulsory (with an annual subscription) for all employees and private companies.

The professional chambers were created by law in 1924 ([32]SCL (1924). Loi du 4 avril 1924 portant création de chambres professionnelles à base élective. Mémorial A, A(2).
http://www.legilux.public.lu/leg/textescoordonnes/compilation/code_administratif/VOL_1/CHAMBRE_PROF.pdf
) and in 1964 (Chamber of Civil Servants and Public Employees ([33]SCL (1964). Loi du 12 février 1964 ayant pour objet de compléter la loi du 4 avril 1924, portant création de chambres professionnelles à base élective par la création d’une chambre des fonctionnaires et employés publics. Mémorial A, 13, 230.
http://www.legilux.public.lu/rgl/1964/A/0230/1.pdf
). They are public establishments, legal persons governed by civil law. Although the professional chambers are supervised by the government, they enjoy financial autonomy. Since 1929, the chambers have been involved in initial education, especially with regard to VET preparing for an occupation. They also have substantial powers regarding apprenticeships; in 1945, their remit in the establishment, supervision and termination of apprenticeship contracts was extended. Their power and involvement were reinforced by the 2008 law reforming VET ([34]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273–3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2 and SCL (2008b). Loi du 19 décembre 2008 portant révision du régime applicable à certains. Mémorial A, 207, 3135–3138.
). Their involvement in vocational training includes:

  • identifying training needs;
  • guidance and information on training;
  • determining the professions or trades offered in VET;
  • training offers;
  • organising training;
  • designing framework training programmes;
  • assessing training programmes and the training system;
  • qualifications and validating experience acquired.

Professional chambers have established a platform for supervisors/tutors where they can find all the necessary support during apprenticeship. They have also created the label ‘training enterprise’ to put the companies committed to training young people into the limelight.

The Chamber of Commerce and the Chamber of Trades and Skilled Crafts have appointed apprenticeship counsellors for each trade and profession. Their main mission is to inform companies and apprentices about vocational training issues (legislation, organisation, programmes, class visits). They also assist enterprises and apprentices in practical process where they:

  • can intervene as mediators in case of disagreement or conflict between the company, the school or the apprentice;
  • participate in organisation of intermediary tests and support the relationship between the school and the company in case of difficulties;
  • are available to apprentices who need to reorient themselves and find an appropriate apprenticeship;
  • follow their evaluation and, if needed or concerned, take part in the class council and in the disciplinary councils;
  • signal irregularities in legislation on vocational training to the competent institutions.

The professional chambers are also authorised by law to organise continuing training courses.

The Education Ministry has created two new structures, to improve the adaptation of schools to the needs of learners and the professional world.

A National Programme Council ([35]Conseil national des programmes.) was created alongside the National Observatory of School Quality at the beginning of 2018, to allow more exchanges and debates about educational matters and to build a bridge between the educational and professional worlds. It should represent the voice of society in discussions about school programmes. The council has eight members (at least three men and at least three women), chosen according to their experience and expertise in different fields such as culture, economics, ecology, associations and others ([36]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.
http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf
).

Total total government expenditure for public education in percentage of GDP increased from 4.8% in 2008 to 5.0% in 2017 ([37]Eurostat - Table gov_10a_exp [accessed 7.11.2018].). Luxembourg devotes the highest level of financial resources to education per learner among the OECD ([38]OECD - Table 10.1787/ca274bac-en [accessed 7.11.2018].) countries. At secondary level, the expenditure per learner is EUR 18 484, while the OECD average is about EUR 8 080 ([39]OECD (2015). Regards sur l’éducation 2015 [Education at a glance 2015].
http://www.oecd.org/education/education-at-a-glance-2015.htm
, [40]European Central Bank Euro foreign exchange reference rate as on 3 June 2016 EUR/USD=1.1154,
https://www.ecb.europa.eu/stats/exchange/eurofxref/html/index.en.html [accessed 9.1.2019].
).

In 2017, funding for initial public education was EUR 2.09 billion ([41]MENJE (2018b). Rapport d’activités 2017 [Activity report 2017]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/rapports-activites-ministere/rapport-activite-2017/index.html
), shared between the three levels of initial education: primary, general secondary, and technical secondary. Education is financed at two levels: central government and local administrations (106 municipalities).

In 2015, more than half (54.5%) of the funding went to primary education (EUR 928 million). At secondary level, expenditure on technical education was higher (EUR 517 million, 30.4% of total funding) than general education (EUR 258 million, 15.1% of total funding). It covered remuneration of teachers, administrative and technical staff, operating costs and investments.

 

Investment in education 2002-15

Source: MENJE 2018.

 

Public funding for general and VET schools was slightly, but constantly, increasing up to 2012. In 2013, it fell by 3.7% but increased in 2014 (+8%) and remained stable in 2015 (+1%). There was a break in time series in 2009; since then the State has been fully in charge of remunerating primary education teachers, previously shared between the State and the communes.

Public funding includes:

  • teachers’ salaries;
  • non-teaching staff salaries;
  • current expenses (goods and services to ensure the daily functioning of educational services; school allowances; care of children outside school hours at municipal level for extra-curricular and after-school activities; the costs incurred by school medicine and school transport);
  • capital expenses (movable and immovable assets).

 

School funding in 2015, % (EUR million)

Source: MENJE (2018). The key figures of national education : statistics and indicators 2016-17. http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html

 

As shown in the above figure, salaries make up the highest costs of all education programmes (73-77%). The share is greater in primary education (77%) than in secondary education. The share of current expenses is higher in primary (14.5%) education than in general (12.5%) or in technical (13.0%) secondary education, possibly because care of children outside school hours at municipal level is costlier at this level.

 

Funders of public education in 2015

Source: MENJE (2018). The key figures of national education: statistics and indicators 2016-17. http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html

 

According to the latest available data, total central government expenditure (the cumulative expenditure of the various ministries and administrations involved in the financing of education) was nearly EUR 1 390 million. With a total contribution of 81.7%, the State is the primary funder of education in Luxembourg. The 106 communes contribute 18.3%, or about EUR 311 million.

Apart from national funds, money spent on public education can also come from foreign sources. The Schengen-Lyzeum Perl is a German and Luxembourgish high school set up in 2007, located in Germany close to the border. Learners can acquire the general and technical secondary school leaving diplomas (administrative and commercial division). The Landkreis Merzig-Wadern (LKMV), a German neighbouring district, pays 60% of the running costs and 50% of the building maintenance and investment in school equipment. The Luxembourg State pays the other part.

Funding for individuals in higher education

The government offers higher education learners financial support in the form of a grant and a loan (basic grant: EUR 1 000, mobility grant: EUR 1 225, grant on social criteria: EUR 0 to 1 900, family grant: EUR 250, student loan: EUR 3 250, registration fee: EUR 0 to 1 850) per academic semester: the grant and loan proportions depend on the applicant’s income ([42]http://portal.education.lu/etudes/Laide-financi%C3%A8re [accessed 6.3.2017].). Tuition fees are taken into account when calculating the financial support. In each academic year, higher education learners apply for the support twice: before the winter and summer semesters ([43]SCL (2010). Loi du 26 juillet 2010 concernant l’aide financière de l’état pour études supérieures. Mémorial A 118, 2039 - 2043.
http://www.legilux.public.lu/leg/a/archives/2010/0118/a118.pdf#page=2
).

Funding continuing VET

Continuing training for employees or for individuals (private initiative) is normally funded by the enterprises or individuals themselves. However, in some sectors, companies must pay a levy to sectoral training providers to benefit from specific access conditions and prices. Companies may also contribute to training centres voluntarily to benefit from specific access conditions and prices. Companies and individuals can receive support and incentives for CVET, often non-financial but linked to working time arrangements.

Funding training for the unemployed and other vulnerable groups

Training for the unemployed and other groups excluded from the labour market is supported by the labour and the education ministries. The labour ministry finances training schemes run by the national centres for continuing vocational training and training schemes run by private centres under contract with the labour and the education ministries. The public employment service also provides financial support for different training programmes for job seekers.

Some projects for job seekers are jointly financed by the European Social Fund. Most are focused on job segments with a high development potential, such as Fit4coding (development of skills for the IT sector) or Fit4 Greenjobs (in cooperation with Institute for Construction Training - IFSB) ([44]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.
http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf
).

The Law of 25 March 2015 established different teacher careers in the Luxembourgish educational system.

Teacher career

Type of teacher

Type of teaching

Required diploma

Secondary school Teachers A1

Technical and general secondary education

BA and MA

Technical education Teachers A2

Technical secondary education

BA

Master of technical education B1

Technical secondary education

Master craftsman diploma or BTS

There are no additional specific access or training requirements for VET teachers beyond a diploma and language requirements (proficiency in the three administrative languages). Recruitment procedures and training provisions for teachers in general secondary education are the same as for teachers in technical secondary education.

All teacher applicants must have a relevant bachelor or master degree for the subject that is being taught. They must pass an examination, and complete a three-year induction course at the Training Institute of National Education (Institut de formation de l’Éducation nationale, IFEN) created in 2015 ([45]SCL (2015). Collection of laws concerning the Training Institute of National Education. Mémorial A, 166.
http://www.legilux.public.lu/leg/a/archives/2015/0166/a166
). During the induction course, future teachers are already teaching at secondary schools while attending a teacher education programme at the IFEN. The induction course ends with a final examination.

Luxembourg University has provided a master degree in secondary education since the 2016-17 academic year, accessible to students holding a bachelor degree in maths, Romance or German languages, who wish to develop the necessary didactic skills to teach in class. Trainee teachers can thereby acquire teaching skills before applying for the examination at the IFEN. The programme includes courses in educational sciences, sociology of education, and psychology, to provide learners with the necessary skills to understand and meet the challenges of teaching in a multicultural and multilingual school system. Four options are available: maths, French language and literature, German language and literature, Luxembourgish language and literature.

The Chamber of Commerce has a training programme for teachers providing continuing vocational training, to facilitate the transfer and appropriation of knowledge by learners. This programme provides fundamental tools for effective teaching, as well as specific aspects to help perfect teachers’ pedagogic approaches.

The law of 19 December 2008 stipulates that an enterprise offering training or apprenticeship has to designate one or more tutors to mentor apprentices throughout their apprenticeship. The tutor is in charge of the practical training and the pedagogic supervision of the apprentice. He is also appointed as the contact person for the apprenticeship counsellor and the competent professional chamber with regard to the progress of the apprentice. The law has increased the responsibility of the tutor for training and assessment of the apprentices. The training of tutors has become central to increasing and assuring the quality of initial and continuing vocational training and in promoting the recognition of diplomas and certificates across the borders. Participation in tutor training is mandatory for each enterprise involved in the training of one or more apprentices. Each tutor has to undergo three-day training, organised by the competent professional chamber. A trainer holding a master craftsperson diploma (Brevet de Maîtrise) or equivalent is exempted from this mandatory training. The training Tuteur en Entreprise (Tutor in company) comprises a legal section, a pedagogic section and a section on assessment. It gives tutors useful tools to set up a training path, manage the relationship with the apprentice, identify the mission of the tutor and be able to help apprentices integrate in the working world and the enterprise ([46]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

The Training Institute of National Education (IFEN) designs, implements and evaluates the professional insertion (internship) and the continuing professional development of teachers and psycho-social staff in education.

Continuing professional development has become increasingly important over the years and is now considered a professional duty in the Luxembourgish education system. A new regulation has entered into force, in which the minimum mandatory continuing training for secondary school teachers has been increased to 48 hours over three years. Within the SCHiLW framework (Schulinterne Lehrer/innen-Weiterbildung - School teachers’ continuing training), the IFEN supports secondary schools that are willing to set up training plans (plans de formation, not compulsory). These plans contribute to greater coherence between the school’s objectives and teachers’ training activities.

The continuing training offer is elaborated by the IFEN in collaboration with school staff, who are consulted annually, and upon their request. IFEN endeavours to meet individual needs that have been identified at various levels, as well as political decisions. Continuing professional development is therefore organised according to training objectives and the availability of the teachers being trained, such as seminars (one-off training courses), training days, conferences, sequential continuing training (introductory module followed by a practical phase which may or may not be accompanied by an exchange and intensification phase). In a period of rapid technological change, it is essential that VET teachers continuously update their vocational skills and knowledge, to ensure trainees leave the VET system with skills that can be put into practice immediately.

In order to contribute to the academic success of learners, training offered aims to develop, in priority, the following teachers’ professional skills:

  • priority 1: teaching and learning in a competence-based approach;
  • priority 2: teaching and learning language skills in a multilingual context;
  • priority 3: information and communication technologies;
  • priority 4: teamwork and communication;
  • priority 5: personal professional development;
  • priority 6: school development;
  • priority 7: school management;
  • priority 8: socio-educational work.

Each year new continuing training courses are proposed in order to answer to individual needs or needs identified at regional or national level.

VET standards are developed in cooperation between the education ministry and the professional chambers. Curricula are based on occupational standards and informed by skill needs in enterprises. The following institutions ensure VET provision in line with labour market needs:

  • Permanent Labour and Employment Committee (Comité Permanent du Travail et de l’Emploi): the ministries of education and labour, cooperate through this committee. It is responsible for reviewing the labour market situation regularly. Its working methods include analysis of job supply and skills demand;
  • Training Observatory: established in 2012 by the National Institute for the Development of Continuing Vocational Training (INFPC); it provides the government and social partners with detailed statistics and reliable qualitative analyses on training issues; these are useful insights for public policy and private strategies in the lifelong learning domain;
  • Employment Observatory: established by the labour ministry; analyses labour market data, publishes a labour market dashboard and organises annual conferences on relevant labour market issues and employment;
  • Competence Observatory: to help improve initial and continuing training offers, the University of Luxembourg competence centre (previously Luxembourg International University Institute - Institut Universitaire International Luxembourgeois, IUIL), in cooperation with companies, identifies and anticipates competence needs in sectors and occupations. Analyses cover the trade, law, health, food and catering sectors, management, socio-professional integration and green professions;
  • Business Federation of Luxembourg: since 1997 has conducted annual surveys ([47]This survey is conducted in collaboration with the Luxembourg Bankers' Association, the Luxembourg Confederation of Commerce, the Chamber of Commerce and the education ministry, with support from the European Union (EURES).) on skill needs, alternatively in the industrial and in the information technology and communication sectors. It explores skill needs of enterprises to achieve a good balance between vocational training supply and labour market demand. The survey is the basis for the Qualifications of tomorrow (Les qualifications de demain) publication. It offers forecasts of enterprise skill requirements for replacements and new job openings, and the associated qualification levels. The publication provides young people and their parents with insights into education paths and encourages public authorities, professional chambers and other VET actors to take account of enterprises’ training needs in CVET ([48]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

See also Cedefop’s skills forecast ([49]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/skills-forecast) and European Skills Index ([50]https://skillspanorama.cedefop.europa.eu/en/indicators/european-skills-index)

The development of the VET qualifications is based on the following elements:

  • occupational profile: lists the areas of activities as well as the activities and tasks of future occupations after two to three years of workplace experience;
  • training profile: based on the occupational profile by areas of competence: occupational and general competences;
  • training programme based on the training profile:

- defines the learning outcomes for each competence and regroups them by learning domain;

- organises the learning domains and outcomes in modules and credits;

- curriculum: determines the content of the different modules.

The main bodies responsible for designing qualifications are curriculum teams and national vocational commissions ([51]SCL (2011). Règlement grand-ducal du 30 juillet 2011 portant institution et organisation des équipes curriculaires, des commissions nationales de formation et des commissions nationales de l’enseignement général pour la formation professionnelle de l’enseignement secondaire technique. Mémorial A 173.
http://legilux.public.lu/eli/etat/leg/rgd/2011/07/30/n3/jo
). A curriculum team is associated with a specific profession or group of professions; training centres and schools are equally represented. The education minister decides on the maximum number of representatives for each team. The curriculum team:

  • develops and revises programmes for the trades and professions it is responsible for;
  • ensures consistency between the objectives of school-based and work-based training;
  • provides guidelines and procedures for continuous assessment of learners at school and in the workplace, in cooperation with the respective committees. The guidelines and procedures feed into evaluation frameworks adopted by the education minister;
  • develops and evaluates the ’integrated project’ (projet integré) that replaces the former final exams. The project aims to check whether the learner has developed the complex competences needed to solve a real or simulated work situation.

National vocational commissions (commissions nationales de formation) exist for each division, trade and profession of general and technical secondary education; they propose course content, methods and evaluation criteria to the education minister. The commissions are made up of:

  • a teacher from each school where vocational or technician programmes are offered;
  • a representative of the national general education commissions, designated by the minister;
  • a representative of each professional chamber associated to the training;
  • representatives of the higher council of health professions and employer representatives in the case of health sector professions;
  • employer representatives of education and social institutions, in the case of social sector professions.

A Division for Curriculum Development ([52]SCL (2017). Loi du 14 mars 2017 portant modification de la loi modifiée du 7 octobre 1993 ayant pour objet: (1) la création d’un Service de Coordination de la Recherche et de l’Innovation pédagogiques et technologiques; (2) la création d’un Centre de Gestion Informatique de l’Éducation ; (3) l’institution d’un Conseil scientifique. Mémorial A 439.
http://memorial.lu/eli/etat/leg/loi/2017/03/14/a439/jo
) was created within the Department for Coordination of Educational and Technological Research and Innovation (SCRIPT) within the Ministry of Education, to simplify the implementation of the 2008 reform. It provides support to the national commissions of programmes in elementary and secondary education, as well as the curriculum teams and national vocational commissions of vocational training, assisting in their tasks, developing and adapting curricula. This division coordinates the work of national commissions, guarantees the implementation and supervises the coherence and consistency of curricula. The division works in close collaboration with various stakeholders to guarantee the scientific framework of curriculum development. It also works in collaboration with the recently installed National Programme Council.

The development and implementation of the European qualifications framework for lifelong learning (EQF) is seen as an opportunity to make explicit the existing education and training levels and the links between them. The key objective of the eight-level national qualifications framework (cadre luxembourgeois des qualifications, CLQ) is to increase the transparency of qualifications. The CLQ serves as a non-binding guiding framework for stakeholders: individuals, education and training providers, and the labour market.

The CLQ was referenced to the EQF and the qualifications framework in the European higher education area (QF-EHEA) in 2012. Beginning in 2014, a committee represented by the education ministry and the higher education ministry published a report which detailed the links between the CLQ and the EQF and to the QF-EHEA. Levels 6-8 include qualifications awarded by Luxembourg University only. VET qualifications have been assigned to EQF levels 2-5, with the higher technician and the master craftsperson certificate, for instance, at the latter.

The philosophy of the CLQ is to show that lifelong learning is not fragmented and that it should not be restricted to formal qualifications. The referencing report, however, only reflects formal education and training, which is changing and moving towards a learning outcomes approach. Once this change is complete, a new report reflecting an adjusted lifelong learning framework, including qualifications acquired through non-formal and informal learning, will be published ([53]Based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

A national approach to quality assurance has been devised, and evaluation and review procedures are in development stage. There is no real quality framework, but legislation and the current organisation take the quality component into account.

Quality standards for VET providers are part of legislation and are used for accreditation and funding. Guidelines and standards are used to promote a culture of continuous improvement. Over the past 10 years, the education and training system has been overhauled to provide the resources needed to cope with the challenges of a rapidly changing environment. Administrative structures have been changed to allow modern school management with a degree of autonomy. In 2004, the legislation promoted partnership-based school community approaches and school initiatives to improve the quality of education. For VET programmes the education ministry coordinates the implementation of the EQAVET recommendation ([54]See EQAVET recommendation at
http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32009H0708(01)&from=EN [accessed 6.3.2017].
).

National indicators related to the 10 proposed by the recommendation are used and monitored nationally. While most are applied in IVET, their use for CVET, which is not monitored centrally, varies by sector or provider.

Secondary education - School development plan, PDS ([55]Plan de développement de l’établissement scolaire (PDS).)

The school development plan (PDS) was introduced by the law of 15 December 2016 ([56]SCL (2016). A-N° 263 du 21 décembre 2016.
http://legilux.public.lu/eli/etat/leg/loi/2016/12/15/n1/jo
).

Schools should describe their school and extracurricular activities in the school development plan to outline their profile and analyse their general situation, as well as constantly to develop and innovate. This approach covers domains that may help their learners receive the best quality education. Each school should elaborate its own steps in a series of areas that are critical for success.

Seven domains are foreseen for secondary education:

  • organisation of pedagogical support. Each learner should have access to remedial measures that meet their needs and capabilities;
  • supervision of children with specific needs to provide tailor-made solutions for their needs and support their learning process;
  • partnerships with parents to improve their involvement in the schooling process and create a partnership culture between families and schools;
  • integration of information and communication technologies (ICT) to prepare learners for the challenges of the employment market influenced by ICT;
  • psycho-social support for learners who face problems at school, or have psychological or family problems, to prevent school dropouts/failure;
  • relevant guidance for learners to help them make the right choices, according to their profiles;
  • extracurricular activities to guarantee equal access for all learners to non-formal learning opportunities, in addition to mainstream classes.

For each of these domains, national objectives have been defined in a national reference framework. Secondary schools are free to choose the domains and objectives they need to focus on.

The school development plan also contains:

  • definition of at least one objective from the description and analysis mentioned above;
  • an action plan for each objective (persons in charge, resources needed, schedule, evaluation criteria);
  • an evaluation and continuous adaptation of the current PDS.

Following the law of December 2016 ([57]SCL (2016). A-N° 263 21 décembre.
http://legilux.public.lu/eli/etat/leg/loi/2016/12/15/n1/jo
), as of the 2017/18 school year each secondary school should elaborate a PDS produced by a school development committee ([58]Cellule de développement scolaire (CDS).). The school development committee is coordinated by the school directorate and includes school staff appointed by the director for a three-year period that may be renewed. Its mission is to analyse and interpret the school’s data, to identify the school’s priority needs, to define school development strategies, to elaborate the school charter, the profile and the PDS, and to ensure internal and external communication, while establishing a triennial plan for the continuing training of its high-school staff.

The Division for the Development of Schools ([59]Division du développement des établissements scolaires.) from the Department for Coordination of Educational and Technological Research and Innovation (SCRIPT) was set up according to the law of 14 March 2017 ([60]SCL (2017). Loi du 14 mars 2017 portant modification de la loi modifiée du 7 octobre 1993 ayant pour objet: (1) la création d’un Service de Coordination de la Recherche et de l’Innovation pédagogiques et technologiques; (2) la création d’un Centre de Gestion Informatique de l’Éducation; (3) l’institution d’un Conseil scientifique. Mémorial A 439.
http://memorial.lu/eli/etat/leg/loi/2017/03/14/a439/jo
). Its mission is to accompany schools in their general approach to school development and, more specifically, to elaborate and implement the PDS, collaborating with various departments, educational structures, national and international partners, who may to optimise the quality of schools. The Division for the Development of Schools has provided several transversal tools, such as a website ([61]https://portal.education.lu/developpementscolaire/Accueil-Lyc%C3%A9es) dedicated to the development of schools, forms allowing schools to coordinate and follow up their PDS, and adaptable questionnaires to facilitate data collection about the perception of school actors.

The school development committee has been working on the PDS since September 2017; it was then adopted by the Education Ministry in September 2018.

A National Observatory of School Quality ([62]Observatoire national de la qualité scolaire.), created at the start of 2018, is responsible for evaluating and supervising the quality of the education system. It is an independent structure. The observatory systematically evaluates the quality of the school system and the implementation of education policies. It does not assess the individual work of teachers, but the organisation and operation of schools and the Ministry of Education. The observatory is composed of eight observers, from public or private sectors, who are totally independent. They visit schools and meet representatives for various school stakeholders, such as parents, learners and teachers, and have exchanges with Education Ministry departments. The Observatory produces an annual activity report and at least one thematic report on a priority area. Every three years, it produces a national report on the school system with its findings and recommendations.

These reports are transmitted to the Government and the Chamber of Deputies and made accessible to the public.

The Division for Data Analysis of The Department for Coordination of Educational and Technological Research and Innovation (SCRIPT) is commissioned to collect and analyse data on the quality of the education offer by analysing school reports or in the context of a project. The results of the surveys may be consulted during the elaboration of a PDS or before making decisions to improve the school’s organisation. This division organises national and international standardised tests. Standardised tests elaborated by the Luxembourg Centre for Educational Testing (University of Luxembourg) and common tests are used as instruments of formative or summative evaluation or the individual learner guidance process. International tests like the OECD’s PISA (Programme for international student assessment), the IEA’s ICILS (International computer and literacy study) generate results which help with the governance of the education system.

Tertiary education

Short-cycle programmes leading to higher technician certificates (BTS) ([63]Brevet de technicien supérieur.) are evaluated externally before being accredited by the higher education ministry for a period of five years. After this time, the accreditation has to be renewed through a new evaluation. This procedure should ensure that the programmes are relevant to the related professional sector ([64]SCL (2010). Règlement ministériel du 15 mars 2010 portant sur l’accréditation des programmes de formation menant au brevet de technicien supérieur. Mémorial A 65.
http://legilux.public.lu/eli/etat/leg/rmin/2010/03/15/n1/jo
).

The university is largely free to design and implement its own quality assurance processes. At Luxembourg University, quality culture and regular quality control through internal and external evaluation of teaching, research and technical, administrative and logistics services are key elements. External audit of the University of Luxembourg has been conducted every four years since 2008 by an external evaluation committee. The independent Committee of External Evaluation is appointed by the Minister for Higher Education and Research.

The University of Luxembourg produces a key performance indicators report in the frame of a multiannual development contract between the Luxembourgish government and the university (2014-17) ([65]Contrat d’établissement pluriannuel entre l’Etat et l’Université du Luxembourg, 2014-17.); this includes publications per researcher, bachelor degrees awarded, master degrees awarded, and master recruitment rate.

Luxembourg has been a member of the European quality assurance register for higher education (EQAR) since 2008 ([66]Although there are no agencies registered in Luxembourg three foreign EQAR agencies operate in the country.).

Continuing VET

Even though there is no real quality framework, quality is a major concern and is covered in the legislation and in the organisation of CVET. Quality will be a major issue in the future of CVET.

The white paper on the national lifelong learning strategy ([67]Anefore (2012). Livre blanc - Stratégie nationale du lifelong learning [White book on the national lifelong learning strategy].
http://www.men.public.lu/catalogue-publications/adultes/informations-generales-offre-cours/livre-blanc-lifelong-learning/131025-s3l-livreblanc.pdf See also
www.S3l.lu
), defines six cross-cutting key principles and related measures and recommendations for implementation. These include developing the quality of lifelong learning and establishing a framework for the quality of adult education and training. This framework will be based on:

  • a quality label awarded to training providers that meet specified criteria in structure and content of the training offer;
  • accreditation of training offers. A working group on training provider accreditation was set up in 2014.

A quality label for municipal governments and non-profit associations can be awarded in CVET by the education minister for a five-year period ([68]SCL (2000). Règlement grand-ducal du 31 mars 2000 ayant pour objet: (1) de fixer les modalités des contrats conventionnant des cours pour adultes et les conditions d’obtention d’un label de qualité et d’une subvention; (2) de créer une Commission Consultative à l’Education. Mémorial A 34, 846-848.
http://www.legilux.public.lu/leg/a/archives/2000/0034/a034.pdf#page=2
). Courses must be of general interest in so-called areas of general education and social advancement. They must meet educational and financial quality criteria. Objectives and course content must be in line with the priorities for adult education.

Quality criteria and priorities are defined for periods of up to five years by the education ministry based on the advice of the Adult Education Advisory Committee ([69]Commission Consultative à l'Éducation des Adultes.). The committee consists of the persons in charge of the Adult Education Department, two representatives delegated by schools offering evening classes, a representative of the Department of Vocational Education and a private sector representative. The committee may also involve adult training experts in its work.

While some private providers commit to quality assurance approaches, a large part of adult education is not subject to systematic evaluation or quality assurance ([70]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

The 2008 legislation ([71]SCL (2008). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience.

Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([72]SCL (2010). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([73]SCL (2016). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the minister. Validation is possible for technical school-based programmes, all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma, or to a part thereof. Experience must be directly related to the requested certification. At higher technician certificate level, an ad hoc evaluation committee is set up for each individual asking for recognition of prior learning.

At university level, validation of non-formal and informal learning allows experience to be recognised with a view to accessing various bachelor or master university studies. The request is considered by a board of examiners whose members are appointed by the chancellor, following recommendation of the dean of the relevant faculty.

Formal VET leads to seven European qualification levels (1 to 7). The 2008 legislation ([74]SCL (2008). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience.

For more information about arrangements for the validation of non-formal and informal learning please visit Cedefop’s European database ([75]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/european-database-on-validation-of-non-formal-and-informal-learning).

Individual training leave

The objective of individual training leave is to ease access to continuing training. Employees working in a company for at least six months, self-employed workers and individuals in a liberal profession (and having been affiliated to the social security system for at least two years) can benefit from 80 days of paid leave during their entire career, but not more than 20 days per two years. Employers can have salaries reimbursed by the government. Training must be provided by an institution issuing certificates recognised by the government. The employee is required to submit a request to the education ministry which then approves the leave – stating the number of days granted – or refuses it.

Language training leave

Language training leave allows employees, the self-employed and individuals in a liberal profession of all nationalities to learn Luxembourgish for social and professional integration. The courses take place during normal working hours. The maximum paid leave is 200 hours over a professional career. Each leave hour entitles employees to a compensatory allowance equal to their average hourly salary paid by the employer. The employer advances the allowance and is reimbursed 50% by the State. The request must be sent to the labour ministry by the employer prior to the start of the course; the leave can be deferred by the employer if it disrupts company operations.

Unpaid training leave and personal working time arrangement

The 2006 Grand Ducal regulation on the organisation of working time (organisation du temps de travail) ([76]SCL (2006). Règlement grand-ducal du 30 mars 2006 portant déclaration d’obligation générale d’un accord en matière de dialogue social interprofessionnel relatif à l’accès individuel à la formation professionnelle continue conclu entre les syndicats OGB-L et LCGB d’une part et l’Union des Entreprises Luxembourgeoises, d’une autre. Mémorial A 85.
http://legilux.public.lu/eli/etat/leg/rgd/2006/03/30/n2/jo
) stipulates a general obligation to reach an agreement on access to CVET through inter-occupational social dialogue to be signed between the trade union federations and the Union of Enterprises. Organising working hours within a flexi-time arrangement and unpaid leave for vocational training purposes is part of this regulation.

Unpaid training leave releases a worker from duties to take part in professional training. The agreement applies to private sector employees who have been employed for at least two years, regardless of the type of employment contract. During the leave, the employment contract is suspended. The employer can refuse the unpaid leave, if the applicant is a high-level executive or if the company has fewer than 15 employees. The employer can also defer the unpaid leave for up to one year where the leave is no more than three months or for up to two years where the leave exceeds three months.

Employees working flexi-time may request amendment of their working time to support participation in training. The employer can refuse to grant such an amendment based on operational needs or impact on the efficient organisation of the business.

Tax exemptions

Every income tax payer may deduct expenses for professional development from taxable income. Such expenses must have a direct link with the business activity performed by the employee and allow improving professional knowledge. They must be paid by the participant and refund claimed through a tax declaration ([77]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

State shared funding for CVET

A company can receive State funding (operated by the education ministry) for investment in CVET. Private companies established in Luxembourg that undertake most of their activities inside the country are eligible. The training targets:

  • employees affiliated with the national social security system;
  • persons bound to the company by an employment contract (fixed-term or permanent);
  • subcontractors working for the applicant company;
  • owners of craft, trade, industry, agriculture or forestry companies.

Investment in training is capped according to the size of the company:

  • at 20% of total payroll for companies with 1 to 9 employees;
  • at 3% of total payroll for companies with 10 to 249 employees;
  • at 2% of total payroll for companies with more than 249 employees.

The share of funding is calculated based on the investment in CVET ([78]SCL (2018a). Loi du 13 mars 2018 portant création d’un Observatoire national de la qualité scolaire. Mémorial A 183.
http://legilux.public.lu/eli/etat/leg/loi/2018/03/13/a183/jo
). Companies receive direct grants: 15-35% of investment (depending on employee profiles).

Support for learning Luxembourgish

Private sector companies legally established in the country can partly recover the costs associated with learning Luxembourgish. Eligible costs include training fees and the costs of study materials and are paid by the labour ministry.

Funding for additional apprenticeship places

The fund for employment provides financial support for the creation of apprenticeship places to encourage enterprises to hire apprentices. It partly reimburses the apprenticeship allowance (27% for vocational DAP programme ([79]Vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP).) and 40% for the vocational CCP programme ([80]Vocational capacity certificate (certificat de capacité professionnelle, CCP).)) and covers the employer’s share of social security costs for the apprentice ([81]SCL (2012). Règlement grand-ducal du 31 octobre 2012 fixant les conditions et modalités des aides et primes de promotion de l’apprentissage. Mémorial A 239, 3153-3154.http://www.legilux.public.lu/leg/a/archives/2012/0239/a239.pdf#page=5). Applications for financial support must be submitted by the enterprises and the apprentice to the public employment service before 1 July of the year following the year in which the learning ended.

Apprenticeship award for a training company

Since 2013, the award for the best training company has been presented each year during the apprenticeship graduation ceremony to the company that commits itself most to apprenticeships (creation of apprenticeship places, follow-up of apprentices) ([82]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

Most guidance services offered during secondary education, operate within the guidance house (maison de l’orientation, 2012). The initiative centralises administrations and counselling services that help people move into working life. It focuses on young people but anyone can find information and advice there. The guidance house includes:

  1. the vocational guidance service of the public employment service (Adem) which provides information on trades/professions and apprenticeship placement;
  2. the Psycho-Social and Educational Accompaniment Centre (CePAS) which helps learners in their school or career guidance and may provide psychological support;
  3. the National Youth Service (SNJ) which supports the acquisition of practical experience through the voluntary Youth Service;
  4. the Local Bureau for Youth (Antennes locales pour jeunes) which offers individual coaching to achieve school or professional projects;
  5. the school reception centre for newcomers for 12 to 17 year-old immigrant learners;
  6. the Centre of Documentation and Information on Higher Education (CEDIES).

This centralisation ensures better coordination of services and stakeholders, while improving visibility.

In 2017 the Guidance Forum (Forum orientation) was set up this is a national council in charge of establishing a national information and guidance strategy. It includes ministries, social partners, directors of secondary schools, parent and learner representatives. The guidance forum has adopted the following definition of guidance:

’Guidance refers to a series of activities that enable the citizen, at any time in his/her life:

  • to identify his/her abilities, skills and interests;
  • to make informed decisions as regards his/her studies and training choices as well as his/her professional activities.

The shared goal is to foster personal fulfilment and the development of society.’

Since 2017, every secondary school must develop its own general guidance approach. The approach has to be in accordance with the reference framework for school and professional guidance elaborated by the guidance house ([83]MENJE (2017a). Cadre de référence pour l’orientation scolaire et professionnelle [Reference framework for school and professional guidance]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/secondaire/psychologieorientation/170124-cadre-reference/index.html
). In each secondary school, a guidance unit is responsible for the implementation of the guidance process set out in the school's development plan (PDS). It is composed of at least two members of teaching staff,

two educational or psychosocial staff and at least one guidance counsellor.

The Higher Education Documentation and Information Centre (Centre de Documentation et d’Information sur l’Enseignement Supérieur) is available to people who require general information about higher education.

The web portal Anelo ([84]https://www.anelo.lu/) is an information and exchange platform for all young people preparing for training, studies or work experience. It centralises information on:

  • trades and professions ([85]http://beruffer.anelo.lu);
  • the steps to follow during a job search;
  • ePortfolio tool that allows young people to gather important documents and certificates showing their strengths and skills;
  • how to gain practical experience in the world of work (jobs for students, volunteer services);
  • where to find information on guidance and support.

The Anelo Web portal and the various connected sites are now being managed by the Guidance House Coordination Department. They are also in charge of promoting the portal and training courses to help young people use the various tools on Anelo.

The Youth guarantee ([86]http://www.jugendgarantie.lu/) was launched in June 2014. It commits national authorities (National Employment Agency, Local Action for Youth, National Youth Service) to offer young people between 16 and 25 high-quality guidance to help them find a job, make it possible to return to school or an apprenticeship, or to offer work experience in projects on a voluntary basis. Each is offered support tailored to his/her background, personal situation and aspirations. Diversification of the school offer is the main priority for education policies in Luxembourg. A recent reform provides growing autonomy to schools to boost this diversification and to support individual school efforts to innovate.

Choosing the right school is becoming more challenging for learners; the MENJE has launched a platform www.mengschoul.lu to help young people and their parents. The platform is for learners going into secondary education, as well as for those going into higher secondary education and foreign learners joining the Luxembourgish school system. The platform is based on a standardised detailed portrait of each school. An interactive map allows users to filter secondary schools according to the innovative projects on offer; other filters allow users to select the school programmes. This tool helps parents and learners to compare VET schools and their specificities to make the best choice. [87]Based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf

Please see:

Vocational education and training system chart

Tertiary

Click on a programme type to see more info
Programme Types

EQF 5

Higher technician

programmes (BTS),

2 years

ISCED 554

Higher technician programme (brevet de technicien supérieur, BTS) leading to EQF level 5, ISCED 554
EQF level
5
ISCED-P 2011 level

554

Usual entry grade

15-17 ([152]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

17 and later ([153]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

19-20

Usual completion age

21-22

Length of a programme (years)

2

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

N

Registration fees

Is it available for adults?

Y

ECVET or other credits

120 credits

Learning forms (e.g. dual, part-time, distance)

Information not available

Main providers

Public and private secondary schools, and technical secondary schools recognised by the State.

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

BTS programmes alternate; they provide both theoretical instruction including general education (like languages) and training in a work environment ([154]www.bts.lu).

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

To be admitted to the programme, learners require either a general or a technical secondary school leaving diploma (diplôme de fin d'études secondaires classique, diplôme de fin d’études secondaires générales), or a technician diploma (diplôme de technicien – DT) complemented by optional modules.

Assessment of learning outcomes

The BTS programme is organised in modules spread over four semesters. Each module has between 5 and 20 ECTS credits and can be composed of different courses with at least one ECTS credit.

Attendance at courses, practical training courses and any other pedagogical activities organised as part of the training is compulsory.

Each course is subject to knowledge assessment that results in a grade. The score is either the result of a continuous assessment carried out during the six-month period, or of a final examination carried out exclusively during an examination session, or by these two assessment modes combined.

 

Diplomas/certificates provided

Graduates receive the higher technician certificate (brevet de technicien supérieur, BTS;

Examples of qualifications

Nurse, paediatric nurse, responsible for exploitation of automated installations, game artist, character designer

Progression opportunities for learners after graduation

Graduation from the higher technician programme does not provide progression possibilities to any other programme.

Destination of graduates

Information not available

Awards through validation of prior learning

Validation of non-formal and informal learning (Validation des acquis de l'expérience – VAE) allows experience to be recognised with a view to obtaining all or part of a higher technician certificate (Brevet de Technicien Supérieur – BTS).

VAE is for everyone, regardless of age, level of study or professional status. The prerequisite is to have completed at least three years or 5 000 hours of paid, unpaid or voluntary work directly related to the requested certification, whether continuous or not.

In order to identify the diploma matching his/her experience, the applicant is advised to consult the list and obtain information from the schools and colleges in question. Some BTS qualifications are not yet accessible through VAE.

The validation application and registration application should be sent to the Head of the school/college in question in order to obtain the diploma. The validation application is accompanied by a portfolio which must set out, with reference to the diploma sought, the knowledge, aptitude and skills that the applicant has gained through experience.

Based on the proposal of the college director, the ministry appoints an ad hoc committee for each training programme.

This committee assesses the validation request and the portfolio and interviews the applicant. It may request a placement into a professional situation (whether real-life or simulated). While deliberating, it assesses the knowledge acquired through experience with regard to the curriculum of the desired diploma.

The ad hoc committee may take one or several of the following decisions:

  • exemption from producing one of the certificates set out by Article 10 (1) of the Law of 19 June 2009 (setting out the terms and conditions for higher education courses of study leading to a higher technician certificate (BTS));
  • registration, provided that an additional part of the curriculum is completed;
  • exemption from attending some of the training modules or classes comprising the modules;
  • exemption from compliance with some of the validation measures;
  • exemption from all of the modules, classes and examinations leading to the diploma being granted.
General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 6

Professional bachelor

programmes,

3 years

ISCED 655

Professional bachelor programmes leading to EQF level 6, ISCED 655
EQF level
6
ISCED-P 2011 level

655

Usual entry grade

16-17 ([155]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

19-20 ([156]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

19-20

Usual completion age

21-22

Length of a programme (years)

3

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

Information not available

Is it available for adults?

Y

ECVET or other credits

180 to 240 credits

Learning forms (e.g. dual, part-time, distance)

- academic teaching

- applied courses

- internship abroad and/or case studies

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

- practical training at school

- in-company practice abroad

- case studies

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Professional bachelor (bachelor professionnel) programmes are accessible to holders of a general or technical secondary leaving diploma or a technician diploma in the field of study.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Graduates receive an application-oriented bachelor degree (professional bachelor, bachelor professionnel).

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Progression to professional or academic Master programme is possible.

Destination of graduates

Information not available

Awards through validation of prior learning

At university level, validation of non-formal and informal learning allows experience to be recognised with a view to accessing various bachelor or master university studies. The request is considered by a board of examiners whose members are appointed by the chancellor, following recommendation of the dean of the relevant faculty ([157]http://www.lifelong-learning.lu/Detail/Article/Diplomes/pour-les-diplomes-universitaires----bachelor-et-master/en and
http://legilux.public.lu/eli/etat/leg/loi/2009/06/19/n1/jo
).

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 7

Professional master

programme,

2 years

ISCED 757

Professional master programme leading to EQF level 7, ISCED 757
EQF level
7
ISCED-P 2011 level

757

Usual entry grade

19-20 ([158]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

20-21 ([159]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

21

Usual completion age

23

Length of a programme (years)

2

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Information not available

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

Information not available

Is it available for adults?

Y

ECVET or other credits

60 to 120 credits

Learning forms (e.g. dual, part-time, distance)

Information not available

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Learners need to hold a (professional) bachelor degree to enter the professional master programme.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Graduates receive an application-oriented master degree (professional master, Master professionnel).

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Graduates holding a professional master programme can progress to academic PhD programmes.

Destination of graduates

Information not available

Awards through validation of prior learning

At university level, validation of non-formal and informal learning allows experience to be recognised with a view to accessing various bachelor or master university studies. The request is considered by a board of examiners whose members are appointed by the chancellor, following recommendation of the dean of the relevant faculty ([160]http://www.lifelong-learning.lu/Detail/Article/Diplomes/pour-les-diplomes-universitaires----bachelor-et-master/en and
http://legilux.public.lu/eli/etat/leg/loi/2009/06/19/n1/jo
).

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

Post-secondary

Click on a programme type to see more info
Programme Types

EQF 5

Master craftsperson

programmes

ISCED 453

Master craftsperson programmes leading to EQF 5 and ISCED 453 – Brevet de maîtrise.
EQF level
5
ISCED-P 2011 level

453

Usual entry grade

Applicants , who must be at least 18, must hold one of the following qualifications:

  • vocational aptitude diploma (Diplôme d'aptitude professionnelle - DAP) 
  • technician's diploma (Diplôme de Technicien - DT)
  • general secondary school leaving diploma (Diplôme de fin d'études secondaires classiques - DFESC)
  • technical secondary school leaving diploma (Diplôme de fin d'études secondaires générales - DFESG)
  • Any other post-secondary qualification (higher technician's certificate (Brevet de technicien supérieur - BTS), bachelor, master)
  • A foreign diploma or certificate recognised by the Ministry of Education, Children and Youth
Usual completion grade

Not applicable

Usual entry age

18+

Usual completion age

Not applicable

Length of a programme (years)

Information not available

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

N

Is it continuing VET?

Y

Is it offered free of charge?

The registration fee for preparatory courses is EUR 600 per year of registration.

The registration fee for exams is EUR 300 per exam session.

Is it available for adults?

Y

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

Courses are organised in the evenings on weekdays and weekends. They are held either at the training centre of the by the Chamber of Trades and Skilled Crafts, or in secondary schools, or in the National Centre for Continuing Vocational Training (CNFPC).

Main providers

Programmes are organised by the Chamber of Trades and Skilled Crafts

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

The courses in professional theory are specific to each trade. They consist, in principle, of three different modules.
The Chamber of Trades and Skilled Crafts proposes the module that the candidate must follow for the current year.
There is a list with the trades for which preparatory courses are offered. 
In some trades, complementary courses, compulsory and subject to fees, have to be followed.

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

To access these programmes, learners are required to have successfully completed at least EQF level 3 in any trades or occupations. Learners should also have at least one year of work experience to be able to take the final exam.

Assessment of learning outcomes

The master craftsperson programmes is organised in modules and the candidates are free to adapt their training to their own pace. When registering, they choose the modules they would like to follow during the school year.
As the maximum duration to finalise the master craftsperson programmes is six years, the Chamber of Trades and Skilled Crafts proposes course planning that allows regular progression, while preserving a margin of safety

Diplomas/certificates provided

Graduates receive the master craftsperson qualification.

Examples of qualifications

Graduates can settle in the craft industry as self-employed and to train apprentices. The qualification confers the title of master craftsperson in the particular trade.

Progression opportunities for learners after graduation

The master craftsperson qualification does not give any access right for higher education; progression opportunities depend on the certificate gained at secondary level.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([149]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273–3288. http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([150]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6. http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([151]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175. http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification.

General education subjects

Information not available

Key competences

The preparatory courses for the master craftsperson programmes are organised in the following fields:

  • business organisation and management, and applied pedagogy;
  • professional theory and practice.
Application of learning outcomes approach

information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

Secondary

Click on a programme type to see more info
Programme Types

EQF 1

Lower secondary

technical programmes (pre-VET)(ESG),

3 years

ISCED 244

The lower cycle of technical secondary education (ISCED 244, EQF 1) is considered as pre-VET and lasts three years. It comprises the ’orientation programme’ and the ’preparatory programme’, designed for learners who struggle with the regular secondary education curriculum.
EQF level
1
ISCED-P 2011 level

244

Usual entry grade

9 ([90]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

11 ([91]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

12

Usual completion age

14

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults may attend the last year of the lower secondary education programme and then access the technical and technician programme as well as a vocational programme.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

Orientation programmes’ (Les classes inférieures de la voie d’orientation)

In the ‘orientation programme’ classes (three years: 7G, 6G and 5G) of general education (languages, mathematics, human and social sciences, natural sciences) the learners’ knowledge is deepened. The language of instruction is German, except for mathematics and the French language course, which are taught in French. During the second year, language courses (French and German) as well as mathematics are taught on two levels: in a basic course or in an advanced class. The choice of enrolment in one of the two courses is made according to the level of competence of the learner and the orientation advice from the class council. In the last year (5G), English is also taught on two levels. The orientation programme includes workshops in secondary schools that allow the learner to discover several trades and occupations. This is complemented by placements and visits in companies.

The preparatory programme (Les classes inférieures de la voie de preparation) :

The lower grades of the preparatory programme (three years: 7P, 6P and 5P) are for learners who, in one or more disciplines, have not reached the core competence referred to at the end of cycle 4 of primary education. They prepare learners for later transition to the orientation programme or vocational training. German, French, mathematics, general culture, physical education and sports and practical learning in workshops are taught in modules spread over three years of teaching. These allow the learner to progress at his own pace and capitalise on a maximum of modules for the subsequent training envisaged.

These two lower secondary programmes are distinguished by their general orientation, the relative importance of the subjects taught and the teaching methods.

Candidates have the choice between daytime and evening courses.

Main providers

Secondary schools and national school for adults.

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Programmes include workshops that allow learners to discover several trades and occupations. This is complemented by placements and visits in companies.

Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up in mid-2018 ([92]SCL (2018b). Loi du 18 juin 2018 portant: (1) Institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs, and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Young people must have successfully finished primary education.

Candidates should be 17 or more and have a school level allowing access to the last year of lower secondary education.

 

Assessment of learning outcomes

The different functions of assessment are given in detail:

  • formative evaluation: helping the learner to become aware of their strengths and weaknesses while documenting their learning process;
  • certification of the learner's individual knowledge and competences at the end of a learning period;
  • serve as a basis for the learner's guidance.

With a view to these objectives, the quarterly school reports (bulletins trimestriels) are complemented by a report supplement (complément au bulletin).

The quarterly report includes for each taught subject the average (out of 60) of classwork notes and other tests or assignments. The supplement to the report gives information on the progress of the learner in the different areas of competence of the taught subjects, giving an unencrypted assessment. This assessment by skills area offers a differentiated and nuanced view of the learners’ abilities.

At the end of each quarter (or semester), the parents (or the adult learner) receive a report (bulletin) detailing:

  • quarterly (or each semester) marks of the subjects taught;
  • the general quarterly (or each semester) mark;
  • remedial measures for unsatisfactory results.

The report at the end of the school year also includes further details:

  • each subject's annual mark;
  • the general annual mark:
  • promotion decision (positive or not) towards the higher class (at the third year of the lower cycle of technical secondary education).
Diplomas/certificates provided

Not applicable

Examples of qualifications

Not applicable

Progression opportunities for learners after graduation

After successful completion of the lower cycle, learners can choose between technical, vocational and technician programmes.

Destination of graduates

Information not available

Awards through validation of prior learning

N

General education subjects

Y

Languages, humanities and social sciences, mathematics and natural sciences

Key competences

Mathematics, languages

Application of learning outcomes approach

Y

Teaching by competences is applied in the lower classes of technical secondary.

Competences refer to the ability of a learner to implement an organised set of knowledge, skills, and attitudes to provide an adequate response to a problem.

Competences sets describe the knowledge and competences that learners must master in a sustainable way at the end of the two last years of lower cycle of technical secondary education.

For language and mathematics, these sets are divided into two levels: basic set and advanced set.

The set of competences differ from the teaching programme, which describe the contents treated in each domain (maths, French, history…).

Share of learners in this programme type compared with the total number of VET learners

Lower technical secondary education in 2016/17 represented 46.9% ([93]2016/17.) of total learners in technical education (lower, medium and upper level) ([94]MENJE (2018a). Les chiffres clés de l’Éducation nationale : statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in lower technical secondary education has remained stable since 2011/12; at that time 12 915 learners attended lower technical secondary education and 12 760 in 2016/17.

EQF 1

Integration classes

ISCED 244

Integration classes (classe d'insertion) of the lower cycle of technical secondary education, EQF1, ISCED 244
EQF level
1
ISCED-P 2011 level

244

Usual entry grade

9 ([95]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

11 ([96]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

12

Usual completion age

14

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults may attend the last year of the lower secondary education programme and then access the technical and technician programme as well as a vocational programme.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

Information not available

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

Programmes are available for young people and also for adults. For the latter, the completion corresponds to a completion of lower technical secondary education.

Integration classes (classe d'insertion) of the lower cycle of technical secondary education have been created for learners who have a good academic record in their country of origin, but do not have a sufficient command of the languages used for tuition. Based on language skills gaps, learners receive intensive support in learning French or German.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([97]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Information not available

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Information not available

Examples of qualifications

Not applicable

Progression opportunities for learners after graduation

Those who complete the integration classes can continue their studies in one of the following programmes: - vocational programme (CCP), ISCED 354, EQF 4;

- vocational programme (DAP) ISCED 354, EQF 4;

- technician programme (DT) ISCED 354, EQF 4;

- technical programme ISCED 354, EQF 4.

Destination of graduates

Information not available

Awards through validation of prior learning

Information not available

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Teaching by competences is applied in the lower classes of technical secondary.

Competences refer to the ability of a learner to implement an organised set of knowledge, skills, and attitudes to provide an adequate response to a problem.

Competences sets describe the knowledge and competences that learners must master in a sustainable way at the end of the last two years of lower technical secondary education.

For language and mathematics, these sets are divided into two levels: basic set and advanced set.

The set of competences differ from the teaching programme, which describe the contents treated in each domain (maths, French, history…).

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 4

Technical

school-based programmes (ESG),

4 or 5 years,

WBL % varies

ISCED 354

Technical school-based programmes (Diplôme d’enseignement secondaire général) leading to EQF level 4, ISCED 354
EQF level
4
ISCED-P 2011 level

354

Usual entry grade

12 ([98]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

15 ([99]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

18 or 19

Length of a programme (years)

4-5

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

N

This programme is not considered as IVET at national level.

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

The curriculum includes general and technical education; the latter includes practical and theoretical classes. The share of the technical part depends on the grade and on the chosen field and varies from approximately 25 to 65%.

Main providers

Secondary schools

Share of work-based learning provided by schools and companies

Share of work-based learning ([100]Nationally referred to as technical learning.) depends on the grade and on the chosen field and varies from approximately 25 to 65%.

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school
  • in-company practice for some programmes
Main target groups

Programmes are available for young people and some of them also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([101]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires: (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the ‘main-stream’ school system.

Entry requirements for learners (qualification/education level, age)

Information not available

Assessment of learning outcomes

Learner assessment is mainly based on summative evaluations, i.e. periodical tests on contents which have been taught recently. Depending on the subjects, one, two or three tests per term may be organised.

The quarterly report includes for each taught subject the average (out of 60) of classwork notes and other tests or assignments.

At the end of each quarter (or semester), the parents (or the adult learner) receive a report (bulletin) mentioning among others:

  • quarterly (or each semester) marks of the subjects taught;
  • general quarterly (or each semester) mark;
  • remedial measures in case of unsatisfactory results.

The report at the end of the school year also includes further details:

  • each subject's annual mark;
  • general annual mark;
  • promotion decision (positive or not) towards the higher class.
Diplomas/certificates provided

Learners who succeed in technical programmes are awarded a technical secondary school leaving diploma (diplôme de fin d’études secondaires générales). This diploma confers the same rights as that from general secondary education; depending on the strand and section, graduates can enter the labour market or pursue higher education.

Examples of qualifications

Work in the administrative field in private companies or public institutions.

Progression opportunities for learners after graduation

Depending on the strands followed (referred to nationally as ‘divisions’), graduates have the following progression opportunities:

a) administrative and commercial: graduates can pursue higher education in economics, law and accounting. They may work in administration in private companies or public institutions);

b) healthcare and social professions: graduates can pursue higher education in these professions. Graduates in nursing education can continue their education as midwife or medical technical assistant in radiology. Graduates in educator training can continue their studies as a state-certified educator for a period of one year;

c) general technical: graduates can pursue higher education in their specialties: engineering, natural science, architecture, design and sustainable development, computer science, environmental sciences);

d) division of arts: graduates can pursue higher education in the same domain;

e) division of tourism and hospitality: graduates can pursue higher education while preparing for the profession of manager in hospitality.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([102]SC (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([103]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([104]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for technical school-based programmes, all VET diplomas and certificates as well as for master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification. At higher technician certificate level, an ad hoc evaluation committee is set up for each individual asking for recognition of prior learning ([105]SCL (2016b). Loi du 23 juillet 2016 modifiant la loi modifiée du 19 juin 2009 portant organisation de l’enseignement supérieur, fixant les modalités du cycle d’études d’enseignement supérieur aboutissant à la délivrance du brevet de technicien supérieur. Mémorial A 143.
http://www.legilux.public.lu/leg/a/archives/2016/0143/a143.pdf#page=2
).

General education subjects

Y

The curriculum includes general and vocational (nationally referred to as technical) education; the latter includes practical and theoretical classes. The share of the technical part depends on the grade and on the chosen field and varies from approximately 25 to 65%.

Key competences

Information not available

Application of learning outcomes approach

information not available

Share of learners in this programme type compared with the total number of VET learners

Technical programmes (medium and upper level) represents 48.7% ([106]2016/17.) of all medium and upper secondary technical education ([107]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in technical secondary education (medium and upper levels) has increased since 2011/12. At that time 5 677 learners attended technical secondary education programme, with the number increasing to 7 043 in 2016/17.

EQF 4

Technician programmes (DT),

4 years,

WBL % varies

ISCED 354

Technician programmes (le diplôme de technicien), leading to EQF level 4, ISCED 354
EQF level
4
ISCED-P 2011 level

354

Usual entry grade

12 ([108]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

15 ([109]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

18

Length of a programme (years)

4

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

  
ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

This technician programme is mainly offered as a full-time track (filière de plein exercice), where all training occurs in an education institution and includes a minimum job placement of 12 weeks. The offer of programmes in the concomitant track (learning in school and in an enterprise takes place in parallel throughout the year - filière concomitante) or mixed track (theoretical and practical training in school in the first years and last year with the concomitant track - filière mixte) has been extended since 2015/16.

Main providers
  • Secondary schools
  • Companies/training centres
Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

• practical training at school

• in-company practice

Main target groups

Programmes are available for young people and some of them also for adults.

The mediator for school maintenance, inclusion and integration was set up in mid-2018 ([110]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Orientation towards vocational programmes takes place at the end of third year of lower technical education upon decision of the class council based on the assessment reports of the whole academic year.

Assessment of learning outcomes

Since the entry into force of the 2008 reform, the technician (and also vocational) programmes have been organised into modules. For each module, an assessment framework has been set up. It distinguishes compulsory and optional skills and specifies indicators and minimum standards. At the end of the module, learners take an exam to assess the acquisition of required skills for the module and receive an assessment report (bulletin), which indicates whether the module has been passed (unsuccessful, successful, very successful).

Technician and vocational programmes also foresee integrated projects in the middle (only for vocational programmes leading to the vocational aptitude diploma and the technician programme) and at the end ([111]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
). These integrated projects aim to monitor whether the learner has developed the complex skills needed to solve a real or simulated work situation. An integrated project can be spread over a maximum duration of three days (24 hours) for programmes leading to vocational aptitude diploma and technician programmes. This project allows learners to demonstrate the acquisition of required skills in a professional situation. The intermediary and the final integrated projects are a compulsory module for these programmes.

An interim assessment sheet is drawn up at the end of

1. the second academic year of normal four-year training;

2. the first academic year of normal training of three years.

The assessment is based on the learner's results in the compulsory modules as planned in the curriculum from the start. Neither the placement in companies nor the intermediate project is taken into account.

A final assessment is made at the end of the programmes taking into account compulsory modules followed since the interim assessment. Neither the final integrated project nor the intermediate project is taken into account.

Assessments are successful if the following conditions are met:

For a DT (other training durations):

  • 85% success in compulsory modules ([112]Compulsory modules comprise fundamental and complementary modules.);
  • 85% success in compulsory vocational modules;
  • success of all fundamental modules.

For a DT (other training duration of training: one year). For other training periods:

  • 90% success in the compulsory modules of the last two years of training;
  • 90% success of compulsory vocational modules;
  • success of all fundamental modules.
Diplomas/certificates provided

The technician diploma certifies that the holder is competent to perform the trade/profession in question. It differs from the programme leading to the vocational aptitude diploma (DAP) ([113]Diplôme d’aptitude professionnelle (DAP).) by in-depth and diversified competences as well as in-depth general education.

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Technician programme graduates may progress to the third year of the general upper secondary programme or follow a one-year optional preparatory module allowing them to enter tertiary education.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([114]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([115]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([116]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification.

General education subjects

Y

In comparison to the vocational DAP programme, the technician programme offers more in-depth general education

Key competences

Information not available

Application of learning outcomes approach

Y

The major VET reform of 2008 ([117]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) was implemented between 2010/11 and 2013/14. Among the key principles of the reform is also that teaching by subject is replaced with teaching by units and modules. Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Share of learners in this programme type compared with the total number of VET learners

In 2016/17 the number of learners following technician programmes (medium and upper level) was 24.2% ([118]2016/17) of all learners following medium and upper secondary technical education ([119]MENJE (2018a). Les chiffres clés de l’Éducation nationale : statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).The total number of learners in technician programmes (medium and upper level) has slightly increased since 2011/12. At that time 3 378 learners attended technical secondary education programmes, with the number increasing to 3 504 in 2016/17.

EQF 3

Vocational programmes (DAP),

3 years,

WBL % varies

ISCED 353

Vocational programmes leading to a vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) leading to EQF level 3, ISCED 353.
EQF level
3
ISCED-P 2011 level

353

Usual entry grade

12 ([120]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

14 ([121]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

17

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults (those 18 years old and above), having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to the vocational aptitude diploma DAP ([122]Vocational capacity certificate (certificat de capacité professionnelle, CCP).). This is available both to job holders and seekers registered at the public employment service. Upon proof of certain work experience, a dedicated committee may guide the adult learner to a suitable grade. The committee includes representatives of the education ministry, Vocational Training Service, labour ministry, guidance service of the employment service, Chamber of Commerce, Chamber of Trades and Skilled Crafts, Chamber of Agriculture, and Chamber of Employees.

Theory training takes place in a technical secondary school or at the national continuing vocational training centre. The practical part is apprenticeship in an enterprise. Adult apprentices receive allowances equal to the minimum wage for unskilled workers (EUR 1 922.96, 1 January 2016) as defined in a 2010 regulation ([123]SCL (2010c). Règlement grand-ducal du 17 décembre 2010 portant organisation de l’apprentissage pour adultes. Mémorial A 245, 4075-4085.
http://www.legilux.public.lu/leg/a/archives/2010/0240/a240.pdf#page=4
).

The 2008 reform introduced a modular system for apprenticeship, which guarantees the validity of any module acquired during initial training for a certain period, aiding access to lifelong learning.

Vocational programmes for adults: evening classes

Within vocational programmes, employed adults can attend the first year a vocational aptitude diploma (DAP) as administrative and commercial agent. The theoretical part is provided through evening classes in a technical secondary school or in the national continuing vocational training centre. The practical part is acquired through full-time employment in a company. After the first year DAP evening class, adults can continue the second and third year DAP classes under an adult apprenticeship contract.

Vocational programmes for adults: on-the-job training

The nursing assistant vocational aptitude diploma can be obtained through on-the-job training. This training is suitable for those with some work experience in the care sector, who have not had the opportunity to undertake IVET. The three-year training course leads to a nursing assistant DAP. Applicants must fulfil admission criteria such as professional experience of minimum 2 500 hours in the care sector, an employment contract (minimum 50% part-time) and the agreement of their employer.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)
  • school-based learning;
  • work practice (practical training at school and in-company practice);
  • apprenticeships.

DAP Vocational programmes can be followed in one of three different tracks:

a) the concomitant track (filière concomitante), where learning in school and in an enterprise takes place in parallel throughout the apprenticeship. Depending on the profession, the two parts can be organised as day-release (such as two days per week in school and three days in an enterprise) or block-release (for example, nine weeks at school and nine weeks in enterprise); the allocated time may also vary depending on the profession;

b) the mixed track (filière mixte) which is suitable for some professions. This programme offers theoretical and practical training in school in the first year. After successful completion of the school-based part, training is continued in line with the concomitant track;

c) the full-time track (filière de plein exercice), where all training occurs in an educational institution, with 12 weeks of practical training or more within an apprenticeship or internship contract.

The shares of general education, VET theory and practice in vocational programme curricula vary by trade. Vocational learning ratios (practical training in companies and in vocational training school) for each trade/profession are defined by the education ministry on the advice of professional chambers.

Main providers

Technical secondary schools

Share of work-based learning provided by schools and companies

Varies

Work-based learning type (workshops at schools, in-company training / apprenticeships)

• practical training at school

• in-company practice

Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([124]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaire; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Guidance towards vocational programmes takes place at the end of the last year of lower technical education upon decision of the class council based on the assessment reports of the whole academic year.

Except for admission criteria, there are no differences between apprenticeships for adults and young people. Those aged 18 and above, having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to DAP.

Assessment of learning outcomes

Since the entry into force of the 2008 reform, the technician (also vocational and technical) programmes have been organised into modules. For each module, an assessment framework has been set up. It distinguishes compulsory and optional skills and specifies indicators and minimum standards. At the end of the module, learners take an exam to assess the acquisition of required skills for the module and receive an assessment report (bulletin), which indicates whether the module has been passed (unsuccessful, successful, very successful).

Vocational and technician programmes also foresee integrated projects in the middle (only for vocational programme leading to the vocational aptitude diploma and the technician programme) and at the end ([125]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
). These integrated projects aim to monitor whether the learner has developed the complex skills needed to solve a real or simulated work situation. An integrated project can be spread over a maximum duration of three days (24 hours) for programmes leading to vocational aptitude diploma and technician programmes. This project allows learners to demonstrate the acquisition of required skills in a professional situation. The intermediary and the final integrated projects are a compulsory module for these programmes.

An interim assessment sheet is drawn up at the end of

1. the second academic year of normal four-year training;

2. the first academic year of normal training of three years.

The assessment is based on the learner's results in the compulsory modules as planned in the curriculum from the start. Neither the placement in companies nor the intermediate project is taken into account.

A final assessment is made at the end of the programmes taking into account compulsory modules followed since the interim assessment. Neither the final integrated project nor the intermediate project is taken into account.

Assessments are successful if the following conditions are met:

For a DAP (other training durations):

  • 85% success in compulsory modules ([126]Compulsory modules comprise fundamental and complementary modules.);
  • 85% success in compulsory vocational modules;
  • success in all fundamental modules.

For DAP (other training duration of training: one year). For other training periods:

  • 90% success in the compulsory modules of the last two years of training;
  • 90% success in compulsory vocational modules;
  • success in all fundamental modules.
Diplomas/certificates provided

Graduates receive the vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP). This diploma certifies that the holder has the skills to perform the trade/profession in question as a skilled worker on the labour market. DAP graduates may also progress to the third year of a technician programme in the same field of study, the third year of the technical programme, or enter a master craftsperson programme. Subject to completing supplementary preparatory modules they can also pursue higher technical studies (études techniques supérieures, ISCED 550 or 650).

Examples of qualifications

Hairdresser, assistant nurse, administrative and commercial agent, butcher, bricklayer, architectural drafter, aircraft mechanic.

Progression opportunities for learners after graduation

DAP graduates may progress to the third year of a technician programme in the same field of study, the third year of the technical programme, or enter a master craftsperson programme. Subject to completing supplementary preparatory modules they can also pursue higher technical studies (études techniques supérieures, ISCED 550 or 650).

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([127]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([128]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([129]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification.

General education subjects

Y

The general education for the DAP programme includes a module on citizenship education as well as French or German. In comparison to the curricular of the CCP programme, credit units and modules are more detailed and extensive.

Key competences

Y

The general education for the DAP programme includes a module on citizenship education as well as French or German.

Application of learning outcomes approach

Y

The major VET reform of 2008 ([130]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) was implemented between 2010/11 and 2013/14. Among the key principles of the reform is that teaching by subject is replaced with teaching by units and modules. Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Share of learners in this programme type compared with the total number of VET learners

Vocational programmes (medium and upper level) DAP and CCP are 27.1% ([131]2016/17.) of medium and upper secondary technical education ([132]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in vocational programmes (medium and upper level) has decreased since 2011/12. At that time 4 360 learners attended technical secondary education programme, with the number decreasing to 3 914 in 2016/17.

EQF 2

Vocational programmes (CCP),

3 years,

WBL % varies

ISCED 353

Vocational programmes leading to a vocational capacity certificate (certificat de capacité professionnelle, CCP) leading to EQF level 2, ISCED 353
EQF level
2
ISCED-P 2011 level

353

Usual entry grade

12 ([133]Counting of grades starts from age 4 when children enter pre-school, which is the first grade.)

Usual completion grade

14 ([134]Counting of grades starts from age 4 when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

17

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults (18 years old and above) having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to CCP. This is available both to job holders and seekers registered at the public employment service. Upon proof of certain work experience, a dedicated committee may guide the adult learner to a suitable grade. The committee includes representatives of the education ministry, Vocational Training Service, labour ministry, guidance service of the employment service, Chamber of Commerce, Chamber of Trades and Skilled Crafts, Chamber of Agriculture, and Chamber of Employees.

Theory training takes place in a technical secondary school or at the national continuing vocational training centre. The practical part is apprenticeship in an enterprise. Adult apprentices receive allowances equal to the minimum wage for unskilled workers (EUR 1 922.96, 1 January 2016) as defined in a 2010 regulation ([135]SCL (2010c). Règlement grand-ducal du 17 décembre 2010 portant organisation de l’apprentissage pour adultes. Mémorial A 245, 4075-4085.
http://www.legilux.public.lu/leg/a/archives/2010/0240/a240.pdf#page=4
).

The 2008 reform introduced a modular system for apprenticeship, which guarantees the validity of any module acquired during initial training for a certain period, aiding access to lifelong learning.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)
  • school-based learning;
  • work practice (practical training at school and in-company practice);
  • apprenticeships.

Vocational CCP programmes can be followed in the concomitant track (filière concomitante), where learning in school and in an enterprise takes place in parallel throughout the apprenticeship. Depending on the profession, the two parts can be organised as day-release (such as two days per week in school and three days in an enterprise) or block-release scheme (for example, nine weeks at school and nine weeks in an enterprise); the allocated time may also vary depending on the profession;

The shares of general education, VET theory and practice in vocational programme curricula vary by trade. Vocational learning ratios (practical training in companies and in vocational training school) for each trade/profession are defined by the education ministry on the advice of professional chambers.

Main providers
  • Technical secondary schools
  • Companies
Share of work-based learning provided by schools and companies

Varies

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school
  • in-company practice
Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([136]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Guidance towards vocational programmes takes place at the end of the third year of lower technical education upon decision of the Class Council based on the assessment reports of the whole academic year.

Except for admission criteria, there are no differences between apprenticeships for adults and young people. Those 18 years old and above, having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to CCP.

Assessment of learning outcomes

Since the entry into force of the 2008 reform, the technician (also vocational and technical) programmes have been organised into modules. For each module, an assessment framework has been set up. It distinguishes compulsory and optional skills and specifies indicators and minimum standards. At the end of the module, learners take an exam to assess the acquisition of required skills for the module and receive an assessment report (bulletin), which indicates whether the module has been passed (unsuccessful, successful, very successful).

CCP also foresee integrated projects at the end of the programme ([137]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
). These integrated projects aim to monitor whether the learner has developed the complex skills needed to solve a real or simulated work situation. An integrated project can be spread over a maximum duration of three days (24 hours) for programmes leading to vocational aptitude diploma and technician programmes. For programmes leading to a vocational capacity certificate, the integrated project is spread over a maximum duration of two days. This project allows learners to demonstrate the acquisition of required skills in a professional situation. The intermediary and the final integrated projects are a compulsory module for these programmes.

An interim assessment sheet is drawn up at the end of

  1. the second academic year of normal four-year training;
  2. the first academic year of normal training of three years.

The assessment is based on the learner's results in the compulsory modules as planned in the curriculum from the start. Neither the placement in companies nor the intermediate project is taken into account.

A final assessment is made at the end of the programmes taking into account compulsory modules followed since the interim assessment. Neither the final integrated project nor the intermediate project is taken into account.

Assessments are successful if the following conditions are met, for the CCP: 80% success in compulsory modules.

Diplomas/certificates provided

This apprenticeship programme prepares learners for the labour market and leads to the vocational capacity certificate (certificat de capacité professionnelle, CCP). This certificate attests that the holder has the social and basic practical skills for a trade/profession as a semi-skilled worker. After two years of working experience in this trade/profession, the holder is considered a skilled worker.

Examples of qualifications

Automotive mechanic assistant, florist assistant, gardener assistant, plasterer, sales assistant, hairdresser (at a lower level than if acquired over the DAP programme).

Progression opportunities for learners after graduation

This programme prepares learners for the labour market and leads to the vocational capacity certificate (certificat de capacité professionnelle, CCP). It is designed for learners with learning difficulties who cannot access studies leading to a vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) or a technician diploma (diplôme de technician, DT). This certificate attests that the holder has the social and basic practical skills for a trade/profession as a semi-skilled worker. After two years of working experience in this trade/profession, the holder is considered a skilled worker. Learners graduating from CCP can progress to the second year of the DAP programme in the same field. By decision of the class council, the learner can even be admitted to the last year of the DAP programme in the same field ([138]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
).

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([139]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([140]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([141]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification. At higher technician certificate level, an ad hoc evaluation committee is set up for each individual asking for recognition of prior learning ([142]SCL (2016b). Loi du 23 juillet 2016 modifiant la loi modifiée du 19 juin 2009 portant organisation de l’enseignement supérieur, fixant les modalités du cycle d’études d’enseignement supérieur aboutissant à la délivrance du brevet de technicien supérieur. Mémorial A 143.
http://www.legilux.public.lu/leg/a/archives/2016/0143/a143.pdf#page=2
).

General education subjects

Y

Key competences

Y

The general education part includes a module on citizenship education.

Application of learning outcomes approach

Y

The major VET reform of 2008 ([143]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) was implemented between 2010/11 and 2013/14. Among the key principles of the reform is that teaching by subject is replaced with teaching by units and modules. Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Share of learners in this programme type compared with the total number of VET learners

Learners following one of the vocational programmes DAP and CCP (medium and upper level) are 27.1% ([144]2016/17.) of all medium and upper secondary technical education learners ([145]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in vocational programmes (medium and upper level) has decreased since 2011/12. At that time 4 360 learners attended technical secondary education programme, with the number decreasing to 3 914 in 2016/17.

VET available to adults (formal and non-formal)

Click on a programme type to see more info
Programme Types

Optional preparatory module

Optional preparatory module - Modules préparatoires aux études techniques supérieures
EQF level
Not applicable
ISCED-P 2011 level

Not applicable

Usual entry grade

14 or 15 ([146]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

15 or 16 ([147]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

18 or 19

Usual completion age

Not applicable

Length of a programme (years)

Not applicable

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Information not available

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

- school-based learning (English, German, French and Maths)

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([148]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Learners must have graduated from a technician programme or hold a vocational aptitude diploma (DAP) to enter these optional preparatory modules.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

In order to certify access to higher technical studies in the corresponding specialty, learners must have passed all the preparatory modules in a language (German, French or English) and all the preparatory modules in mathematics as described in the timetable of the curricula concerned.

Examples of qualifications

Not applicable

Progression opportunities for learners after graduation

Successful completion of the optional preparatory modules provides the graduates access to tertiary programmes.

Destination of graduates

Information not available

Awards through validation of prior learning

Information not available

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available.