Brexit Disclaimer
This website as well as the publications and online tools accessible via this website may contain UK data and analysis based on research conducted before the United Kingdom’s exit from the European Union on 31 January 2020. EU averages or other statistical parameters including the UK reflect the situation in the European Union before 31 January 2020 and should not be considered as representative of the situation in the EU thereafter. Any data or information pertaining to the UK will be gradually phased out from Cedefop’s website, publications and online tools, as ongoing research projects with the United Kingdom’s participation are concluded. Data coming from UK were collected, processed and published before its withdrawal from the EU. Therefore, EU averages contain UK related data up to 2019.

General themes

VET in Denmark comprises the following main features:

  • a mainstream system providing qualifications at all levels, from compulsory schooling to doctoral degrees;
  • a parallel adult education and continuing training (CVT) system.

Adult education and continuing training are designed to meet the needs of adult learners, for example through part-time courses. The two systems offer equivalent qualifications at various levels, enabling horizontal permeability.

Distinctive features ([1]Cedefop (2016). Spotlight on VET in Denmark. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8101_en.pdf
):

The Danish VET system is characterised by a high level of stakeholder involvement. Social partners, vocational colleges, teachers and learners are all involved in developing VET based on consensus and shared responsibility. Stakeholders play a key role in advising the Ministry of Education on overall VET policy and determining the structure and general framework for training programmes within their field, cooperating in national trade committees. At local level, stakeholders cooperate in developing curricula to respond to local labour market needs.

Denmark has the highest participation in adult education and continuing training in the EU. High participation rates reflect the national strategy to focus on knowledge-intensive specialist sectors and lifelong learning, the large public sector and a tradition of strong ties between education institutions and social partners.

An integrated lifelong learning strategy was introduced in 2007 and supported by the implementation of a national qualifications framework. This improved horizontal and vertical permeability within education and training. It also improved guidance services and provided better opportunities for recognition of non-formal learning and qualifications through standardised procedures for validation of prior learning.

Public financing is central to the VET system, with colleges receiving performance-based block grants. Apprenticeships and employee further training are subsidised according to a solidarity principle, coordinated in the AUB system (Arbejdsgivernes Uddannelses Bidrag). Within this system, all enterprises, regardless of their involvement in VET, contribute a fixed amount per employee to a central fund. Enterprises are then partially reimbursed for providing training placements and for employee participation in continuing training.

Education and training are considered a key area. As demand for skilled labour continues to increase, IVET is expected to accommodate an increasingly heterogeneous learner population. Two reforms have had significant influence on VET development. The VET reform (2014) established VET learners’ minimum entrance requirements. Requirements for VET teachers were strengthened in 2010, since when all VET teachers must have a pedagogic diploma (60 ECTS) at EQF level 6. Both initiatives are expected to increase VET quality. Social assistance reform (2014) makes it mandatory for unemployed people under 30, receiving social benefits, to participate in education and training. This will increase the number of weaker learners entering VET.

The 2014 VET reform has four main objectives for improving VET quality:

  • more learners must enter VET directly from compulsory schooling: from 18% in 2015 to 30% by 2025;
  • completion rates in VET must be improved: from 52% in 2012 to 67% in 2025;
  • VET must challenge all learners so they reach their full potential;
  • employer and learner satisfaction with VET must gradually be increased by 2020.

A lack of suitable training placements in enterprises is frequently cited as a primary reason for learner dropout. Several policy initiatives seek to address the problem, but the global financial crisis has further widened the gap between training place supply and demand. Implementation of 50 practical training centres (2013) and the planned 1 000 new placements in Vækstplan 2014 (growth plan, 2014) are expected to alleviate this problem.

Unemployment, and particularly long-term unemployment, among young people with little or no work experience poses challenges for adult education and continuing training. Substantial upskilling and reskilling is necessary to avoid a considerable part of the workforce becoming permanently excluded from the labour market. The 2014 growth plan includes funding for the unskilled to become skilled workers through targeted adult VET programmes.

Data from VET in Denmark Spotlight 2016 ([2]Cedefop (2016). Spotlight on vocational education and training in Denmark. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8101_en.pdf
).

Population in 2018: 5 781 190 ([3]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 16.5.2019].)

It increased since 2013 by 3.2% due to positive natural growth and a higher immigration than emigration rate ([4]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 16.5.2019].). The fertility rate of 1.75 in 2017 is well above the EU average.

As in many EU countries, the Danish population is ageing.

The old-age dependency ratio is expected to increase from 29 in 2015 to 45 in 2060 ([5]Old-age-dependency ratio is defined as the ratio between the number of persons aged 65 and more over the number of working-age persons (15-64). The value is expressed per 100 persons of working age (15-64).).

 

Population forecast by age group and old-age-dependency ratio

Source: Eurostat, proj_15ndbims [extracted 16.5.2019].

 

An increasing proportion of the total population is made up of foreign immigrants and their descendants. In January 2018, this group accounted for 13.4% of the Danish population.

Providing education and training opportunities to those with a non-Danish ethnic background in order to ensure their integration into the labour market is a policy focus. At the beginning of 2016 the government launched a new VET training programme for immigrants ([6]IGU).

Denmark is increasingly becoming a multicultural society. Currently, 13.4 % of the population has an immigrant background.

Consequently, there are a growing number of VET-related programmes for immigrants.

Most companies are micro- and small-sized.

Employment by sector/main economic sectors in 2016:

  • trade and transport;
  • other business services;
  • public administration, education and health;
  • agriculture, forestry and fishing.

Exports comprise mainly agricultural products, food, medicine and green tech.

 

Source: Statistics Denmark [extracted 6.11.2017].

 

The Danish labour market is highly regulated. Only low skilled jobs are available without a diploma.

Total unemployment ([7]Percentage of active population, 25 to 74 years old.) (2018): 4.2% (6.0% in EU-28); it increased by 1.6 percentage points since 2008 ([8]Eurostat table une_rt_a [extracted 20.5.2019].).

 

Unemployment rate (aged 15-24 and 25-64) by education attainment level in 2008-18

NB: data based on ISCED 2011; breaks in time series; low reliability for ISCED 5-8, age 15-24.
ISCED 0-2 = less than primary, primary and lower secondary education. ISCED 3-4 = upper secondary and post-secondary non-tertiary education. ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_urgaed [extracted 16.5.2019].

 

Unemployment rates of people aged 15-24 are higher than among people aged 25-64 for all education levels, with low qualified (or not qualified) people scoring the highest unemployment rates.

Among 25-64 year olds, economic crises had hit more low-qualified and high-qualified people than those with medium-level qualifications, including most VET graduates (ISCED levels 3 and 4).

Employment rate of 20 to 34-year-old VET graduates remained stable from 2014 (86.1%) to 2018 (88.6%) ([9]Eurostat table edat_lfse_24 [extracted 16.5.2019].), which was above the EU-28 average.

 

Employment rate of VET graduates (20 to 34 years old, ISCED levels 3 and 4)

NB: Data based on ISCED 2011; breaks in time series.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
Source: Eurostat, edat_lfse_24 [extracted 16.5.2019].

 

The employment rate of all ISCED level graduates has increased to 81.2% (+2.3 percentage points) in 2014-18. In the same period, the employment rates of 20 to 34-year-old VET graduates increased by 2.5 percentage points ([10]NB: Break in series. Eurostat table edat_lfse_24 [extracted 16.5.2019].).

The share of the Danish population aged 25 to 64 with higher education (ISCED 5-8) is 38.3%, which is above the EU-28 average of 32.2%. The share of people holding medium-level qualifications (ISCED 3-4) is also high (40.4%).

 

Population (aged 25 to 64) by highest education level attained in 2018

NB: Data based on ISCED 2011. Low reliability for ‘No response’ in Czechia, Iceland, Latvia, and Poland.
ISCED 0-2 = less than primary, primary and lower secondary education.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_pgaed [extracted 16.5.2019]

 

Share of learners in VET by level in 2017

lower secondary

upper secondary

post-secondary

Not applicable

38.9%

Not applicable

NB: Data based on ISCED 2011. Source: Eurostat, educ_uoe_enrs01, educ_uoe_enrs04 and educ_uoe_enrs07 [extracted 16.5.2019].

 

Share of initial VET learners from total learners at upper secondary level (ISCED level 3), 2017

NB: Data based on ISCED 2011.
Source: Eurostat, educ_uoe_enrs04 [extracted 16.5.2019].

 

With a 38.9% share of IVET learners in the total population of upper secondary learners in 2016, Denmark is below the EU-28 average of 47.2%.

In general, there are more male than female learners in VET: 68% and 32% in 2017.

However, the distribution is uneven in various branches. In commercial training and social and healthcare training, for example, there are more female apprentices, while the opposite applies to technical training ([11]http://www.statistikbanken.dk/statbank5a/default.asp?w=1366).

The share of early leavers from education and training has decreased significantly from 11.3% in 2009 to 10.2% in 2018. It is above the national objective for 2020 of not more than 10%, and below the EU-28 average of 10.6%.

 

Early leavers from education and training in 2009-18

NB: Share of the population aged 18 to 24 with at most lower secondary education and not in further education or training; break in series.
Source: Eurostat, edat_lfse_14 [extracted on 16.05.2019] and European Commission, https://ec.europa.eu/info/2018-european-semester-national-reform-programmes-and-stability-convergence-programmes_en [accessed 14.11.2018].

 

In 2012, the completion rate in VET was only 52%. The proposal for a reform of the Danish VET system was ratified by Parliament in 2014, with one of its objectives being to improve completion rates to at least 60% by 2020 and at least 67% by 2025.

Lifelong learning offers training opportunities for adults, including early leavers from education.

 

Participation in lifelong learning in 2014-18

NB: Share of adult population aged 25 to 64 participating in education and training; break in series. Source: Eurostat, trng_lfse_01 [extracted 16.5.2019].

 

Denmark has the highest participation in adult education and continuing training in the EU, regardless of levels of educational attainment. In 2017, the share of participation in education and training among the population aged 25-64 was 26.8% compared with EU-28 average of 10.9%. These figures refer to all forms of education and training activity, both formal and non-formal.

The high participation rate reflects several specific characteristics, such as the national strategy to focus on knowledge-intensive specialist sectors and lifelong learning, a large public sector and a tradition of strong ties between education institutions and social partners. Adult vocational training programmes (Arbejdsmarkedsuddannelser, AMU), offering short vocational training programmes to skilled and unskilled workers, as well as to the unemployed, have a significant role to play in this regard.

Learners in mainstream education, October 2017

The main age group in VET is 18-20, but there is a significant group of VET-learners aged 30-40.

 

Source. Statistics Denmark [accessed 8.4.2019].

 

The education and training system comprises:

  • primary and lower secondary education (basic schooling); (ISCED levels 1-2);
  • upper secondary education; (ISCED level 3);
  • post-secondary education (ISCED levels 4-5);
  • higher education;(ISCED levels 6-8).

Children participate in mainstream education from the age of six and progress through the system during their youth into adulthood. Adult education and continuing training (CVT) mirrors the qualifications provided within the mainstream system but is designed specifically for adults. It also provides opportunities to acquire supplementary qualifications. As such, the two parallel systems combined provide a framework for lifelong learning.

Basic schooling is compulsory from the ages of 6 to 16, that is, from pre-school class to ninth grade. In 2017 ([12]https://www.uvm.dk/statistik/grundskolen/elever/soegning-til-ungdomsuddannelserne), 46.2% of the youth cohort decided to continue to the optional 10th grade rather than enter an upper secondary programme directly. The 10th grade is an option for young people to acquire academic competence and clarity about their choices before entering youth education (either general or vocational upper secondary education). 2015 VET reform combines the 10th grade and VET programmes into a programme called EUD10.

Primary and lower secondary education is generally integrated into, and located within, the comprehensive Danish Folkeskole ([13]Municipal primary and lower secondary school, literally ‘folk’ or ‘people’s school’.), although other types of institution, such as private independent schools, also exist. Of the youth cohort, 80.0% attended the comprehensive Danish Folkeskole in the school year 2016/17. There is a tendency to move towards private compulsory schooling. In the same school year (2016/17), 15.9% attended a private school. Of the rest of the youth cohort, 4.1% attended special programmes. Primary and lower secondary education is completed by taking an examination providing access to upper secondary (youth) education.

Within the adult education and continuing training system, there are two programmes at EQF level 2. Preparatory adult education (FVU) provides courses in basic literacy and mathematics, as well as courses for those with learning difficulties or with Danish as their second language. General adult education (AVU) is provided to adults who, for whatever reason, did not complete lower secondary education or need supplementary education in particular subjects. Qualifications at this level are equivalent to the ninth or 10th grade leaving examination.

Upper secondary education consists of both general upper secondary education and vocational upper secondary education and training (erhvervsuddannelse, EUD). General upper secondary education programmes usually last three years and prepare learners for higher education at tertiary level. Five different qualifications result from five corresponding programmes:

  • upper secondary leaving qualification (studentereksamen, STX) (EQF 4);
  • higher preparatory examination ([14]The higher preparatory examination will in the future be profiled as a pathway for students with a non- academic profile and can be completed without a formal examination.) (højere forberedelseseksamen, HF) (EQF 4);
  • higher commercial examination (højere handelseksamen, HHX) (EQF 4);
  • higher technical examination (højere teknisk eksamen, HTX) (EQF 4);
  • combined vocational (journeyman’s test) and general upper secondary leaving qualification (EUX) (EQF 5).

The adult education (age 25 and above) and continuing training system includes three types of programme at upper secondary level:

  • higher preparatory single subjects (enkeltfag, HF) (EQF 4);
  • basic (vocational) adult education (Erhvervsuddannelse for voksne, EUV) (EQF 3-5), which is equivalent to EUD;
  • and adult vocational training programmes (Arbejdsmarkedsuddannelser, AMU) (EQF 2-5).

In broad terms, higher education comprises:

  • professionally oriented short- and medium-cycle programmes where the short-cycle programmes lead to an academy profession degree and are offered at academies of professional higher education, while the medium-cycle programmes lead to a professional bachelor degree and are offered by university colleges;
  • research-based long-cycle programmes offered at universities where most learners continue to a master degree programme after completing a bachelor degree. The former can then provide access to doctoral programmes.

There are corresponding programmes within the adult education and continuing training system: short-cycle further (vocational) adult education (VVU), medium-cycle diploma programmes, and long-cycle master programmes. As part-time courses, these programmes allow participants to combine education with a working career, as well as improving the integration of the individual’s professional and life experience.

The Danish VET system is divided into IVET and CVT.

The IVET system is for learners aged up to 25 and the CVT for learners aged 25 and above.

Danish education and training features a mainstream system providing qualifications at all levels, from compulsory schooling to doctoral degrees, and a parallel adult education and continuing vocational training (CVT) system. CVT is designed to meet the needs of adult learners, for example through part-time courses. The two systems offer equivalent qualifications at various levels, enabling horizontal permeability.

VET programmes are organised according to the dual principle, alternating between periods of college-based and work-based learning (apprenticeship training) in enterprises. The college-based learning will typically comprise practice based learning in workshops.

When learners complete a VET programme they can enter the labour market as skilled workers, or can apply for CVT in the form of professional academy programmes (Erhvervsakademier).

Learn more about apprenticeships in the national context from the European database on apprenticeship schemes by Cedefop: http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/apprenticeship-schemes/scheme-fiches

The Danish VET system can best be characterized as a unified VET system based on the dual principle.

Although VET programmes are offered in several variations in Denmark, building on different legal frameworks, there is no doubt that the main pathway through VET is the dual-based apprenticeship programme, founded and developed from the beginning of VET education and training in Denmark.

More than 95% of participants in Danish VET are involved in this kind of VET programme, leaving only a small percentage for “alternative” VET pathways, such as the ‘new master apprenticeship programme’ (ny mesterlære), in which the dual system is normally put in parentheses, or the few college-based VET programmes without work-based learning in a company.

VET programmes organised according to the dual principle, alternate between periods of college- based and work-based learning (apprenticeship training) in enterprises. A typical initial VET programme (EUD) lasts three-and-a-half years with a 2:1 split between workplace and college- based training, although there is considerable variation among programmes. Individual study plans are compiled for all students. VET colleges and social partners share the responsibility for developing curricula to ensure responsiveness to local labour market needs. Qualifications at this level provide access to relevant fields in academy profession (KVU) programmes and professional bachelor programmes at tertiary level.

Adopted from the Spotlight on VET – 2018 compilation ([15]Cedefop (2019). Spotlight on VET – 2018 compilation: vocational education and training systems in Europe. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/en/publications-and-resources/publications/4168
)

Parliament sets out the overall framework for VET, which is administered by the Ministry of Education. The Ministry has overall parliamentary, financial and legal responsibility for VET, laying down the overall objectives for programmes and providing the legislative framework within which stakeholders, social partners, colleges and enterprises are able to adapt curricula and methodologies to the needs of both learners and the labour market.

Social partners play an institutionalised role at all levels of VET, from the national advisory council on vocational upper secondary education and training (Rådet for de grundlæggende Erhvervsrettede Uddannelser), which advises the Ministry of Education on principal matters concerning VET, to playing an advisory role at the local level through local training committees comprising representatives of the social partners who advise colleges on local adaptations of VET. Their most important role is to ensure that VET provision is in line with the needs of the labour market.

 

Stakeholder involvement in Denmark

Source: www.uvm.dk

 

The national advisory council consists of 31 representatives from the social partners. In its advisory capacity, the council monitors developments in society and highlights trends relevant to VET. The council makes recommendations to the Ministry regarding the establishment of new VET programmes and the adaptation, amalgamation or discontinuation of others.

National trade committees (faglige udvalg) are the backbone of the VET system. Approximately 50 trade committees are responsible for 106 main programmes. The committees normally have between 10 and 14 members and are formed by labour market organisations (with parity of membership between employer and employee organisations). They are financed by participating organisations.

Among their core responsibilities, national trade committees:

  • perform a central role in the creation and renewal of VET courses by closely monitoring developments in their particular trade. They also have a dominant position in formulating learning objectives and final examination standards based around the key competences that are deemed to be required in the labour market;
  • conduct relevant analyses, development projects, etc., and maintain close contact with relevant stakeholders;
  • decide the regulatory framework for individual courses within boundaries set by the legislative framework. They decide which trade is to provide the core of the training, the duration of the programme and the ratio between college-based teaching and practical work in an enterprise;
  • approve enterprises as qualified training establishments and rule on conflicts which may develop between apprentices and the enterprise providing practical training;
  • function as gatekeepers to the trade, as they are responsible for issuing journeyman’s certificates in terms of content, assessment and the actual holding of examinations.

Local training committees are affiliated to each vocational college and ensure close contact with the local community, thus improving responsiveness to particular local labour market needs. They consist of representatives of local employers and employees appointed by national trade committees, as well as representatives of staff, management and learners appointed by colleges. Training committees work closely alongside colleges in determining the specific curriculum of colleges, including which optional subjects are available. They assist and advise national trade committees in approving local enterprises as qualified training establishments and in mediating conflicts between apprentices and enterprises. Finally, training committees help to ensure that enough suitable local training placements are available.

117 VET colleges offer basic vocationally oriented education programmes. 97 of these are technical colleges, commercial colleges, agricultural colleges or combination colleges. In addition, 20 colleges offer social and healthcare training programmes. A number of the colleges offer their programmes through local branches at locations other than the main college. As self-governing institutions, vocational colleges are led by a governing board with overall responsibility for the administrative and financial running of the college and educational activities in accordance with the framework administered by the education ministry. The board consists of teachers, learners and administrative staff representatives, as well as social partner representatives. The board takes decisions regarding which programmes are offered at the college and their capacity, imposes local regulations and guidelines, guarantees responsible administration of the college’s financial resources, including approval of budgets and accounts and hires and fires the operational management (director, principal, dean or similar). The operational management, meanwhile, is responsible for implementing the overall objectives and strategies set out by the governing board.

A publicly financed system of basic, secondary and further education and training that recognises relevant non-formal and informal competences and practical work experience is a fundamental characteristic of the system.

Mainstream (‘youth’) VET is based on alternative models where training takes place in turn at college and in an enterprise. The state finances training at colleges, while enterprises finance on-the-job training; apprentices receive an apprentice’s salary while in the company, as laid down in the collective agreements.

In 2018, the state spent a total of DKK 7 173 3 million (EUR 963 million) on VET basic courses and main programmes (see table below). A considerable proportion of these funds was distributed to colleges in accordance with the ‘taximeter’ principle, whereby funding is linked to some quantifiable measure of activity, for example, the number of full-time equivalent learners, with a set amount awarded per unit. Among other things, this system provides an incentive for colleges to increase retention within the system.

Besides the ‘taximeter’ rate, VET providers also receive an annual fixed grant for the maintenance of buildings, salaries, etc. The total state grant is provided as a block grant which institutions use at their own discretion within the boundaries of the legislative framework and specific institutional objectives.

Expenditure on main youth education pathways (2018)

VET youth education

EGU and production schools

Upper secondary education ([16]General, vocational and others.)

DKK 7 173.3 million

(EUR 963 Million)

DKK 1 263.3 million

EUR 170 Million)

DKK 12 178 million

(EUR 1 635 million)

   

Upper Vocational Education

   

DKK 3 085.4 million

(EUR 414 million)

Source: National budget 2018.

When it comes to financing training in companies, all employers, both public and private, pay a sum into the ‘employers' reimbursement scheme’ (Arbejdsgivernes Uddannelsesbidrag), regardless of whether or not they provide apprenticeship placements. This fund finances VET both for young people and adults. From 2018, all employers will be obliged to pay an annual contribution of DKK 2 702 (EUR 362) per full-time employee. These funds are then allocated to workplaces that take in apprentices so that they do not bear the cost of training alone. These employers receive reimbursement for wages paid during apprentices’ periods of college-based training.

VET for adults (AMU) is largely publicly financed. Providers receive ‘taximeter’ funding and must negotiate budgets and targets with the Ministry of Education annually.

In VET, there are:

  • general subject teachers;
  • vocational subject teachers;
  • in-company trainers;
  • mentors.

General subject teachers are usually university graduates with a professional bachelor degree in teaching.

Vocational subject teachers usually have VET education background and substantial experience in the field (normally, at least five years is required).

The job of a VET teacher is considered demanding, and the motivation for applying for these jobs is of the highest level, when jobs in the private sector are hard to find.

Colleges and training centres have autonomy in staff recruitment. The Ministry of Education is not involved in teacher recruitment procedures, and teachers are not civil servants entering the system through tests.

There are no requirements for teachers to have a pedagogical qualification prior to their employment.

Pedagogical training (Diplomuddannelsen i Erhvervspædagogik) is part-time in-service training based on interaction between theory and practice. This programme was introduced for all teachers employed in VET and adult education (AMU) recruited after 15 January 2010 and replaces the previous teacher training course (Pædagogikum). The objective is to improve teaching skills to a level equivalent to teachers in compulsory education with a professional bachelor degree. The programme is the equivalent of one year of full-time study (60 ECTS) and the acquired qualification is placed at EQF level 6. It is, however, generally conducted as a part-time study to root training in practical teaching experience. New teachers must enrol in the programme within one year of gaining employment at a VET college or AMU centre. The programme must be completed within a period of six years. The programme was developed by the Danish National Centre for the Development of Vocational Education and Training (Nationalt Center for Erhvervspædagogik, NCE), a centre of excellence collecting, producing and disseminating knowledge on VET based at University College Copenhagen (UCC). The programme was developed in cooperation with an advisory group consisting of representatives of teacher associations and college management organisations, as well as the Ministry of Education. There are three compulsory and five optional modules, as well as a final examination project. Both NCE and other providers at different university colleges offer the programme ([17]For further information, see:
https://cumulus.cedefop.europa.eu/files/vetelib/2016/ReferNet_DK_TT.pdf
).

In-company trainers play an important role in VET, given the dual training principle characteristic of all VET. There are different types of trainers with different responsibilities: planners, training managers and daily trainers. However, there are very few legal requirements to become a trainer.

Trainers in enterprises who are responsible for apprentices must be craftsmen. They must have completed a VET programme, for which they have received a ‘journeyman’s certificate’, and have work experience.

Once qualified to teach in VET, there is no general legislation on in-service training. Individual teachers are obliged to keep their subject-specific and pedagogical knowledge up-to-date. The college is required to draw up a plan for the competence development of the teachers at the college. On this basis, and in cooperation with the teacher, the college determines the individual’s professional in-service training plan. Courses are offered locally by many providers in accordance with market conditions. A certificate is normally awarded to participants, but a recognised qualification is not generally awarded. The new VET reform requires skills updating for teachers and leaders in VET institutions at a level equivalent to 10 ECTS points. The updating will continue until 2020, and DKr 400 million (EUR 53 million) has been granted for it.

There are also no in-service training requirements or control mechanisms for in-company trainers. Quality assurance, beyond that undertaken voluntarily by the enterprise, is restricted to informal contacts between the VET college and the enterprise. The adult education (AMU) systems provide a number of courses of one to two weeks duration to support the training of trainers. The courses are not mandatory and are mostly used by the social care and healthcare professions.

More information is available in the Cedefop ReferNet thematic perspective on teachers and trainers ([18]http://www.cedefop.europa.eu/en/publications-and-resources/country-reports/teachers-and-trainers).

Social partners play an institutionalised role at all levels of VET, from the national advisory council on vocational upper secondary education and training (Rådet for de grundlæggende Erhvervsrettede Uddannelser), which advises the Ministry of Education on principal matters concerning VET, to playing an advisory role at the local level through local training committees comprising representatives of the social partners who advise colleges on local adaptations of VET. Their most important role is to ensure that VET provision is in line with the needs of the labour market.

Among their core responsibilities, national trade committees:

  • perform a central role in the creation and renewal of VET courses by closely monitoring developments in their particular trade. They also have a dominant position in formulating learning objectives and final examination standards based around the key competences that are deemed to be required in the labour market;
  • conduct relevant analyses, development projects, etc., and maintain close contact with relevant stakeholders;
  • decide the regulatory framework for individual courses within boundaries set by the legislative framework. They decide which trade is to provide the core of the training, the duration of the programme and the ratio between college-based teaching and practical work in an enterprise;
  • approve enterprises as qualified training establishments and rule on conflicts which may develop between apprentices and the enterprise providing practical training;
  • function as gatekeepers to the trade, as they are responsible for issuing journeyman’s certificates in terms of content, assessment and the actual holding of examinations.

Local training committees are affiliated to each vocational college and ensure close contact with the local community, thus improving responsiveness to particular local labour market needs. They consist of representatives of local employers and employees appointed by national trade committees, as well as representatives of staff, management and learners appointed by colleges. Training committees work closely alongside colleges in determining the specific curriculum of colleges, including which optional subjects are available. They assist and advise national trade committees in approving local enterprises as qualified training establishments and in mediating conflicts between apprentices and enterprises. Finally, training committees help to ensure that enough suitable local training placements are available.

See also Cedefop’s skills forecast ([19]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/skills-forecast) and European Skills Index ([20]https://skillspanorama.cedefop.europa.eu/en/indicators/european-skills-index).

Social partners play an institutionalised role at all levels of VET, from the national advisory council on vocational upper secondary education and training (Rådet for de grundlæggende Erhvervsrettede Uddannelser), which advises the Ministry of Education on the main issues concerning VET, to playing an advisory role at the local level through local training committees comprising representatives of the social partners who advise colleges on local adaptations of VET. Their most important role is to ensure that VET provision is in line with the needs of the labour market.

The national advisory council consists of 31 representatives from the social partners. In its advisory capacity, the council monitors developments in society and highlights trends relevant to VET. The council makes recommendations to the Ministry regarding the establishment of new VET programmes and the adaptation, amalgamation or discontinuation of others.

National trade committees (faglige udvalg) are the backbone of the VET system. Approximately 50 trade committees are responsible for 106 main programmes. The committees normally have between 10 and 14 members and are formed by labour market organisations (with parity of membership between employer and employee organisations). They are financed by participating organisations.

Among their core responsibilities, national trade committees:

  • perform a central role in the creation and renewal of VET courses by closely monitoring developments in their particular trade. They also have a dominant position in formulating learning objectives and final examination standards based around the key competences that are deemed to be required in the labour market;
  • conduct relevant analyses, development projects, etc., and maintain close contact with relevant stakeholders;
  • decide the regulatory framework for individual courses within boundaries set by the legislative framework. They decide which trade is to provide the core of the training, the duration of the programme and the ratio between college-based teaching and practical work in an enterprise;
  • approve enterprises as qualified training establishments and rule on conflicts which may develop between apprentices and the enterprise providing practical training;
  • function as gatekeepers to the trade, as they are responsible for issuing journeyman’s certificates in terms of content, assessment and the actual holding of examinations.

Local training committees are affiliated to each vocational college and ensure close contact with the local community, thus improving responsiveness to particular local labour market needs. They consist of representatives of local employers and employees appointed by national trade committees, as well as representatives of staff, management and learners appointed by colleges. Training committees work closely alongside colleges in determining the specific curriculum of colleges, including which optional subjects are available. They assist and advise national trade committees in approving local enterprises as qualified training establishments and in mediating conflicts between apprentices and enterprises. Finally, training committees help to ensure that enough suitable local training placements are available.

Various approaches to quality assurance of vocational colleges are implemented. Self-assessment remains the primary mechanism, but external monitoring is increasing in importance. Since the 1980s, a shift has taken place from detailed regulation of input to framework regulation of output. The aim of output regulation is to increase the focus on results and quality so that institutional practices meet political objectives, including adaptation to the needs of regional and local business sectors for education and competence development ([21]Ministry of Education (2014a). Tilsyn med erhvervsuddannelserne [Monitoring of VET].
https://www.uvm.dk/erhvervsuddannelser/ansvar-og-aktoerer/tilsyn/tilsyn-med-faglig-kvalitet
).

Monitoring is conducted at two levels:

  • system level: the assessment is on the effectiveness of the more than 100 different main programmes in terms of employment frequency among graduates. The education ministry then enters into dialogue with national trade committees about any programmes which fail to reach their targets in order to assess their relevance in terms of labour market needs and possible steps for improvement;
  • institutional level: at this level, monitoring can be divided into content monitoring and financial monitoring. The first concerns the degree to which a vocational college is providing its programmes in accordance with the legislative framework. The second monitors the college’s compliance with budgetary constraints as laid down by the education ministry.

Completion, dropout and examination pass rates also form part of the quality appraisal of a vocational college. Within companies, the social partners supplement ministerial monitoring through national trade committees and local training committees, appraising the quality of graduates, curricula, apprenticeships within enterprises, etc.

Quality assurance mechanisms are also part of the

validation process when it comes to including new qualifications in the Danish qualification framework. Only officially recognised, validated and quality-assured programmes are included in the qualifications framework. Informal and non-formal learning are only recognised to the extent that they are formalised though a process of validation of prior learning corresponding to one of the qualifications included.

In terms of VET, trade committees (at the upper secondary level) and further education and training committees (adult VET) assess programmes and make recommendations for their placement in the framework to be approved by the education ministry. For each educational field, guidelines have been produced to aid committees in their assessment and are quality-assured through consultation with independent experts. Procedures and criteria for including VET qualifications in the framework are the subject of an evaluation report compiled by the Danish Evaluation Institute ([22]EVA - Danish Evaluation Institute (2011). Referencing the Danish qualifications: framework for lifelong learning to the European qualifications framework.
https://www.voced.edu.au/content/ngv%3A54105
).

Competence assessment for young people

A young person participating in VET will have his or her competence assessed in the initial period of the education. The competence assessment should clarify what is required by the learner in relation to the education they want. The competence assessment is based on previous education or employment. The goal is to ensure that the education programme that the college offers the learner allows him or her to start at the right level and to avoid duplicating education. The college should allow the competence assessment to be included in the preparation of the learner’s individual education plan, so that the learner is credited with relevant parts of the programme ([23]https://www.uvm.dk/erhvervsuddannelser/adgang-og-optagelse/realkompetencevurdering).

Competence assessment for adults

Adults can have their competences assessed in relation to adult vocational courses and adult vocational education. In respect of short courses, this is an option known as Individual Competence Assessment (Individuel Kompetence Vurdering, IKV). Individual citizens have a right to this assessment and can even obtain financial compensation from the job centre for the time spent in this process, which takes between half a day and five days, provided by the relevant educational institution.

Recognition of prior learning results in an individual plan for education and a competence document listing formal qualifications, the individual’s prior experiences and learning equivalents, or a course certificate depending on the relevance and validity of his or her former experiences ([24]https://www.retsinformation.dk/Forms/R0710.aspx?id=152433#Kap6). When applying for adult vocational education, it is compulsory to have one’s prior learning and experiences assessed before enrolment, which means that every adult above 25 years of age who intends to embark on vocational education should participate in Recognition of Prior Learning (so-called realkompetencevurdering, RKV, or RPL). This process takes between half a day and five days and leads the participant to one of three learning options:

  • adult vocational education 1 (EUV 1): the learner has at least two years of relevant workplace experience. This means that the practice-based periods of the course and its initial part/ introductory basic programmes are left out (Basic Course 1; Grundforløb 1). In the case of mercantile vocational education, the primary part is included in the adult version;
  • adult vocational education 2 (EUV 2): the learner has less than two years of relevant workplace experience. An education plan should be drawn up reflecting the participant’s experiences, which will usually exclude the initial part and shorten the other parts;
  • adult vocational education 3 (EUV 3): the learner has no relevant workplace experience. Adults should follow the same education plan as young people, but should not have the initial part (Basic Course 1; Grundforløb 1, GF 1) ([25]https://uvm.dk/-/media/filer/uvm/.../pdf18/.../180321--vejledning-euv-ma...).

For more information about arrangements for the validation of non-formal and informal learning please visit Cedefop’s European database ([26]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/european-database-on-validation-of-non-formal-and-informal-learning).

Salary for apprentices

Danish VET learners are entitled to receive financial support during their education and training. If the VET learner signs a contract with a company, he or she will receive a salary during the education and training period. The salary is DKK 9 500 -12 500 per month (EUR 1 275 - 1 675) and increases each year.

If the VET learner does not have a contract with a company, he or she is entitled to receive financial support from the Danish learners' grants and loans scheme (Statens Uddannelsesstøtte, SU) when the learner is enrolled in the basic course (GF1 and GF2).

If the learner is living with his or her parents, the monthly amount is DKK 946 (EUR 125). If the learner is living away from his or her parents and is 20 years of age, the monthly amount is DKK 6 090 (EUR 800).

Loans and grants

A learner receiving financial support from the SU is also entitled to take out a loan with the SU. The monthly amount of the loan is normally DKK 3 116 (EUR 420). Loans must be repaid at 4% interest during the period of education and at the national discount rate of +1% after finishing that period.

Participants of VET for adults (AMU) are entitled to a fixed allowance: the State grant system for adult training (godtgørelse, VEU). In 2018, the amount available was DKK 4 300 (EUR 578) per week, corresponding to the maximum unemployment insurance benefit rate. As most participants are employed and receive a full salary during the training period, this allowance is primarily paid to employers as partial reimbursement of wages. As with apprenticeship training (EUD), expenditure for the allowances is covered by the employers’ reimbursement scheme, to which all enterprises contribute a fixed amount regardless of levels of participation in adult education and continuing training activities.

Participants may also receive a transport allowance and financial support for board and lodging ([27]Covered by Arbejdsgivernes Uddannelsesbidrag (AUB)the employers reimbursement scheme.) if programmes are offered at a considerable distance from the participant’s home.

Employers’ reimbursement scheme

All employers, both public and private, pay a sum into the ‘employers' reimbursement scheme’ (Arbejdsgivernes Uddannelsesbidrag), regardless of whether or not they provide apprenticeship placements. This fund finances VET for both young people and for adults (AMU). From 2018, all employers will be obliged to pay an annual contribution of DKK 2 702 (EUR 362) per full-time employee. These funds are then allocated to work places that take apprentices so that they do not bear the cost of training alone. These employers receive reimbursement for wages paid during apprentices’ periods of college-based training.

The latest tripartite agreement of August 2016 has launched a couple of new incentives for Danish companies aiming to establish more contracts with apprentices. The overall goal is to establish 10 000 new contracts in 2025.

Primarily, companies will be able to provide a much clearer picture of themselves as education operators, giving them the option of assessing whether they are in line with political expectations.

Fines and stimulations for companies

Companies that fail to sign the necessary number of contracts must pay a fine of DKK 27 000 (EUR 3 620) for each missing contract relative to the size of the company. On the other hand, companies that meet the standard number of contracts will receive a 7.4% higher refund from AUB (Arbejdsgivernes Uddannelsesbidrag, the employers reimbursement scheme,) to motivate them to sign the expected number of contracts.

In some Danish regions, public employers have laid down rules concerning the involvement of private companies in projects, underlining that the company cannot be engaged in public activities if the number of apprentices is below the standard.

Wage compensation scheme

Among the incentives promoting companies’ interest in having their low-skilled workers participate in adult vocational education is the wage compensation scheme. Companies are partly compensated for the wages they pay to their employees who are participating in education at a rate, in 2018, of DKK 4 300 (EUR 4 300) a week, equivalent to the highest level of unemployment benefit ([28]http://www.veug.dk/borger/veu-godtgoerelse). The companies should pay for the courses. In 2018 the payment will be between 590 DKK (EUR 79) and DKK 950 (EUR 127) per person per week ([29]https://www.efteruddannelse.dk/VEUPortal/faces/ApplFrontPage?_afrLoop=25...).

Please see:

Vocational education and training system chart

Tertiary

Click on a programme type to see more info
Programme Types

EQF 5

Further adult education

programmes,

some WBL

ISCED 554

Further vocational adult education programmes leading to EQF level 5, ISCED 554 (VVU, Videregående Voksenuddannelse).
EQF level
5
ISCED-P 2011 level

554

Usual entry grade

Not applicable

Usual completion grade

Not applicable

Usual entry age

Information not available

Usual completion age

Information not available

Length of a programme (years)

2-3 years on average (part-time); requested completion within 6 years

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

N

Is it continuing VET?

Y

Is it offered free of charge?

N

with some exceptions

Is it available for adults?

Y

ECVET or other credits

The education ministry has decided that ECVET points should not be used in the Danish vocational training system.

In Denmark, it has been decided not to split up education programmes into modules to which ECVET, or other credit points, might be assigned. However, there are other countries in the EU that have introduced a credit points system. Therefore, there may be a need for a school receiving foreign pupils in mobility programmes to decide how many ECVET/other credit points the course corresponds to. In Denmark, the course of study is awarded ECVET points in relation to time. A full-time equivalent programme corresponds to 60 points.

Learning forms (e.g. dual, part-time, distance)

VVU programmes are specifically tailored to the needs of adults, for example, by providing courses over a longer duration on a part-time basis, largely during evenings and weekends, to allow ongoing employment.

Main providers

Business and technical academies

Share of work-based learning provided by schools and companies

25%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school
  • in-company practice
Main target groups

Programmes are available for young people and adults.

People with job experience are the main group. Unemployed people can receive grants for participation (SVU).

Entry requirements for learners (qualification/education level, age)

In addition to an appropriate VET qualification or a general upper secondary qualification, two to three years of relevant work experience is required.

Assessment of learning outcomes

To complete a programme, learners need to pass a final examination. Each module in the flexible programme is finalised with an examination and the learner has to pass a final examination as well.

Diplomas/certificates provided

Award of an academy profession degree (erhvervsakademigrad, AK)

Examples of qualifications

Retail, interpreter, international transport and logistics, and information technology

Progression opportunities for learners after graduation

Adult VVU) qualifications, like the mainstream KVU, can provide access to a supplementary diploma degree programme, allowing graduates to build on an academy profession degree to bachelor-equivalent level within the same field, while VVU qualifications also provide access to relevant full-time professional bachelor programmes.

As such, there is full horizontal permeability between the mainstream and adult education and continuing training systems.

Destination of graduates

Most participants (66%) finalise only a part of VVU and return to their jobs. Of this group, 50% continue into other forms of education (3-4 years after VVU.)

Of the group of participants who finalise a full VVU, 9% participate in further education (3-4 years after VVU) ([45]https://www.eva.dk/sites/eva/files/2017-08/Videregaende%20voksenuddannelse%20-VVU.pdf).

Awards through validation of prior learning

Y

General education subjects

Y

The programme is flexible and the learner can choose general education subjects as part of the programme.

Key competences

Y

Application of learning outcomes approach

Y

Each module in the programme is based on learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

9% ([46]This figure is for VVU and Academy Professions Programmes and calculated in relation to all VET learners at secondary level.)

EQF 5

Academy professions

programmes (KVU),

some WBL

ISCED 554

Short-cycle higher education programmes leading to EQF level 5, ISCED 554 (Erhvervsakademiuddannelser, KVU)
EQF level
5
ISCED-P 2011 level

551, 554

Usual entry grade

Not applicable

Usual completion grade

Not applicable

Usual entry age

21

Usual completion age

23

Length of a programme (years)

2 years

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

N

Is it continuing VET?

Y

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

A programme can be 90, 120 or 150 ECTS credits.

Learning forms (e.g. dual, part-time, distance)

School-based learning and practical training at school (and in-company practice)

Main providers

10 business and technical academies (erhvervsakademier)

Share of work-based learning provided by schools and companies

50%

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Workshops at schools

Practical training at schools

Main target groups

The main target groups are young people and adults who have completed their initial education.

Entry requirements for learners (qualification/education level, age)

Admissions requirements for academy profession and professional bachelor programmes are either relevant vocational upper secondary education and training (EUD) or general upper secondary education combined with relevant labour market experience. There may be more specific requirements regarding certain attainment levels within particular general subjects for some programmes (applicants with a VET background may have to take additional general education qualifications as a supplement).

Assessment of learning outcomes

Apart from theoretical subjects, programmes are usually completed by a project examination and always contain a degree of workplace training.

Diplomas/certificates provided

Award of an academy profession degree (erhvervsakademigrad, AK)

Examples of qualifications

Dental hygienist, installation electrician, multimedia designer, laboratory technician, marketing manager, etc.

Progression opportunities for learners after graduation

An academy profession degree can provide access to a supplementary diploma degree programme.

The latter allows graduates to build on an academy profession degree to bachelor-equivalent level in the same field.

Destination of graduates

Most graduates (65%) enter the labour market after they finish their KVU. Some progress to further education.

Awards through validation of prior learning

Y

General education subjects

Y

a few general education subjects are part of this programme.

Key competences

Y

Application of learning outcomes approach

Y

The programme is based on learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

In 2017, 36 272 students were enrolled in KVUs and professional bachelor programmes. This figure indicates a significant increase over previous years of more than 50%. To strengthen cohesion at the tertiary level, since autumn 2011 all higher education from KVU to PhD level has been placed under the jurisdiction of the Ministry of Higher Education and Science.

EQF 6

Professional bachelor

programmes,

some WBL

ISCED 655

Professional bachelor programmes leading to EQF level 6, ISCED 655 (Professionsbachelor)
EQF level
6
ISCED-P 2011 level

665

Usual entry grade

Not applicable

Usual completion grade

Not applicable

Usual entry age

21

Usual completion age

25

Length of a programme (years)

3-4 years

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

N

Is it continuing VET?

Y

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

30 ECTS credits per semester. A full programme is normally 210 credits.

Learning forms (e.g. dual, part-time, distance)

School-based learning and practical training at school.

Main providers

Seven university colleges

Share of work-based learning provided by schools and companies

25%

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Workshops and practical training at schools as a part of general education subjects.

Main target groups

Young people and adults who have completed their initial education.

Entry requirements for learners (qualification/education level, age)

Admissions requirements for professional bachelor programmes are either relevant vocational upper secondary education and training (EUD) or general upper secondary education combined with relevant labour market experience. There may be more specific requirements regarding certain attainment levels within particular general subjects for some programmes (applicants with a VET background may have to take additional general education qualifications as a supplement).

Assessment of learning outcomes

Apart from theoretical subjects, programmes are usually completed by a project examination and always contain a degree of workplace training.

Diplomas/certificates provided

Professional bachelor degree

Examples of qualifications

Teacher, social educator, midwife, radiographer, occupational therapist, biomedical laboratory scientist, nurse, leisure manager, journalist, social worker, a wide range of engineering programmes.

Progression opportunities for learners after graduation

A professional bachelor degree can provide access to certain university-based master programmes.

Destination of graduates

Most graduates (75%) enter the labour market after they finish their professional bachelor programme.

Awards through validation of prior learning

Y

General education subjects

Y

General education subjects are a major part of a professional bachelor education.

Key competences

Y

Application of learning outcomes approach

Y

The programme is based on learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

In 2017, 36 272 students were enrolled in KVUs and professional bachelor programmes. This figure indicates a significant increase over previous years of more than 50%. To strengthen cohesion at the tertiary level, since autumn 2011 all higher education from KVU to PhD level has been placed under the jurisdiction of the Ministry of Higher Education and Science.

The total number of students enrolled in KVUs and professional bachelor programmes was about 60% of the number of students who were enrolled in VET in 2017.

Post-secondary

Click on a programme type to see more info
Programme Types

EQF 2-5

CVET (AMU) for

new skills and upgrade

Adult vocational training programmes leading to EQF levels 2-5, (Arbejdsmarkedsuddannelser, AMU)
EQF level
2-5
ISCED-P 2011 level

Range

Usual entry grade

Not applicable

Usual completion grade

Not applicable

Usual entry age

Not applicable

Usual completion age

Not applicable

Length of a programme (years)

Half a day to 50 days; one week on average

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

Y

Is it offered free of charge?

Yes and no

– some courses are free of charge, some have charges

Is it available for adults?

Y

Aged 25 and above

ECVET or other credits

The education ministry has decided that ECVET points should not be used in the Danish vocational training system.

In Denmark, it has been decided not to split up education programmes into modules to which ECVET, or other credit points, might be assigned. However, there are other countries in the EU that have introduced a credit points system. Therefore, there may be a need for a school receiving foreign pupils in mobility programmes to decide how many ECVET/other credit points the course corresponds to. In Denmark, the course of study is awarded ECVET points in relation to time. A full-time equivalent programme corresponds to 60 points.

Learning forms (e.g. dual, part-time, distance)

Depending on what best corresponds to the needs of enterprises and participants, courses can take the form of traditional classroom teaching, training in open workshops, distance learning or training at the workplace and be spread over several consecutive days, over a longer period or conducted as evening classes. Programmes can be combined both within and across qualification areas and alternate between theory and practice.

Main providers

Vocational colleges, AMU training centres and private providers

Share of work-based learning provided by schools and companies

75%

Work-based learning type (workshops at schools, in-company training / apprenticeships)

According to the needs of participants and enterprises, individual training maps are developed and followed and a range of learning types can be included.

Main target groups

AMU programmes target both low-skilled and skilled workers, but they are open to all citizens who are either resident or employed in Denmark, irrespective of educational background. Some AMU courses are also targeted at the unemployed. The objectives are threefold:

  • to contribute to maintaining and improving the vocational skills and competences of participants in accordance with the needs of the labour market and to further the competence development of participants;
  • to contribute to solving problems in labour-market restructuring and adaptation in accordance with the needs of the labour market in both the short- and long-term;
  • to give adults the possibility of upgrading competences for the labour market, as well as personal competences through opportunities to obtain formal competences in vocational education and training ([41]Source: Ministry of Education’s webportal. See the Governments objectives for adult vocational training: short vocational training programmes mainly for low skilled and skilled workers on the labour market. http://www.eng.uvm.dk/adult-education-and-continuing-training/adult-voca...).
Entry requirements for learners (qualification/education level, age)

Adults aged 25 and above

Assessment of learning outcomes

Examination of AMU courses is practical-based and, depending on the context, may include some theoretical elements. All courses are finalised with an examination.

Diplomas/certificates provided

Upon completion, participants receive a certificate. In around 120 programmes, this certification is a formal requirement for fulfilling certain job functions (such as operating certain machinery). AMU certificates are also included in the Danish qualifications framework for lifelong learning, at any point from level 2 to level 5.

Examples of qualifications

Truck driver, scaffolder, team leader

Progression opportunities for learners after graduation

AMU certificates do not provide direct access to further education and training, although they can be included in an assessment of prior learning resulting in credit transfer, for example, if entering a mainstream VET programme in the same field.

Destination of graduates

Information not available ([42]ReferNet DK estimates the majority of graduates enter labour market.)

Awards through validation of prior learning

Y

The validation process in conducted by the AMU Centre and the relevant teacher is responsible for the specific validation of prior learning. The process is a combination of validation of formal learning and practical assessment.

Prior to enrolment into adult vocational education, it is compulsory to have one’s prior learning and experiences assessed. Every adult above 25 years of age who intends to embark on vocational education should participate in Recognition of Prior Learning (so-called realkompetencevurdering, RKV, or RPL). This process takes between half a day and five days and leads the participant to one of three models:

  • EUV 1: the learner has at least two years of relevant workplace experience. This means that the practice-based periods of the course and its initial part/introductory basic programmes are left out (Basic Course 1; Grundforløb 1). In the case of mercantile vocational education, the primary part is included in the adult version;
  • EUV 2: the learner has less than two years of relevant workplace experience. An education plan should be drawn up reflecting the participant’s experiences, which will usually exclude the initial part and shorten the other parts;
  • EUV 3: the learner has no relevant workplace experience. Adults should follow the same education plan as young people, but should not have the initial part (Basic Course 1; Grundforløb 1, GF 1).
General education subjects

Y

such as reading, writing and mathematics courses

Key competences

Key competences can be included

Application of learning outcomes approach

Y

All AMU courses are described in terms of learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

In 2018 the share of AMU participants among all VET participants was 6.5%.

In 2018, there were approximately 463 327 participants in AMU courses, a significant drop since 2010 when there were almost 590 000 participants in AMU.

This could partly be explained by the high pace and bustle of industry during this period, and partly by the rigidity and formal structures of the education system.

However, as many of these courses are of very short duration (as little as half a day), the figures for full-time equivalent students are much lower at just 7 406 in 2018 ([43]https://www.uddannelsesstatistik.dk/Pages/Reports/1801.aspx). This again represents a significant fall in comparison with 2010 figures. Most participants in the programmes either have VET as their highest level of education (51%) or compulsory schooling (25%) ([44]VEU-rådet (2011). Strategiske fokusområder 2011 [Strategic focuses 2011], p. 45.).

Secondary

Click on a programme type to see more info
Programme Types

EQF 2-3

Basic VET (EGU)

programmes,

WBL at least 75%

ISCED 353

Basic vocational training programmes leading to EQF levels 2-3, ISCED 353 (Erhvervsgrunduddannelse, EGU)
EQF level
2-3
ISCED-P 2011 level

353

Usual entry grade

Not applicable

Usual completion grade

Not applicable

Usual entry age

Not applicable

Usual completion age

Not applicable

Length of a programme (years)

2

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Aged below 30

ECVET or other credits

The education ministry has decided that ECVET points should not be used in the Danish vocational training system.

In Denmark, it has been decided not to split up education programmes into modules to which ECVET, or other credit points, might be assigned. However, there are other countries in the EU that have introduced a credit points system. Therefore, there may be a need for a school receiving foreign pupils in mobility programmes to decide how many ECVET/other credit points the course corresponds to. In Denmark, the course of study is awarded ECVET points in relation to time. A full-time equivalent programme corresponds to 60 points.

Learning forms (e.g. dual, part-time, distance)

Training is full-time. It is primarily practical, with little theoretical content, and combines alternating school-based (one third) and workplace-based training (two-thirds).

Main providers

Vocational colleges, agricultural colleges, social and healthcare colleges, etc.

Share of work-based learning provided by schools and companies

>=75%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • workplace-based training
Main target groups

Basic vocational training is aimed at unemployed young people aged below 30 who are unable to complete another form of education or training, which might equip them with qualifications to enter the labour market. The goal is to improve their vocational and personal skills and inspire them to enter the labour market or pursue further training possibilities.

Entry requirements for learners (qualification/education level, age)

There are no minimum entry requirements concerning age.

Assessment of learning outcomes

The training programme is set on an individual basis and may contain elements from the main programmes. Each training period should be concluded as an individual training element, which may be accredited through other training programmes. Statements are issued giving details of training content, job function, marks, etc.

Diplomas/certificates provided

On completion of the entire training programme, a certificate is issued by the college. Any completed elements from a main programme can later be transferred as credit if entering the relevant programme.

Examples of qualifications

Low-skilled pedagogical assistant, low-skilled carpenter, low-skilled chauffeur

Progression opportunities for learners after graduation
  • labour market
  • IVET
  • production school
  • adult education (AVU)
Destination of graduates

Graduates from EGU progress to ([32]Source: The Ministry of Children and Education, 2016.):

  • 48% in jobs;
  • 10% in education and training;
  • 38% receiving public support.
Awards through validation of prior learning

Y

Learning outcomes obtained in companies and different education institutions are assessed and validated and can

be recognised as part of IVET.

General education subjects

Y

General education subjects (for example Danish or Mathematics) can be a part of the educational plan.

Key competences

Y

Key Competences can be a part of the programme.

Application of learning outcomes approach

Y

The school-based part of the programme will typically be based on learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

Students within EGU ([33]Basic vocational training programmes leading to EQF levels 2-3, ISCED 353 (Erhvervsgrunduddannelse, EGU).)

2012

2013

2014

2015

231 6

2 331

238 2

2337

Source: Statistics Denmark, 2018.

EQF 4-5

VET programmes (EUX),

WBL 50%,

4-4.5 years

ISCED 354

Combined vocational and general upper secondary education leading to EQF levels 4-5, ISCED 354 (Erhvervsuddannelse og gymnasial eksamen, EUX)
EQF level
4-5
ISCED-P 2011 level

354

Usual entry grade

9/10

Usual completion grade

12/13/14

Usual entry age

17

Usual completion age

20

Length of a programme (years)

4-4.5

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

The education ministry has decided that ECVET points should not be used in the Danish vocational training system.

In Denmark, it has been decided not to split up education programmes into modules to which ECVET, or other credit points, might be assigned. However, there are other countries in the EU that have introduced a credit points system. Therefore, there may be a need for a school receiving foreign pupils in mobility programmes to decide how many ECVET/other credit points the course corresponds to. In Denmark, the course of study is awarded ECVET points in relation to time. A full-time equivalent programme corresponds to 60 points.

Learning forms (e.g. dual, part-time, distance)
  • school-based learning (contact studies, including virtual communication with the teacher/trainer);
  • work practice (practical training at school and in-company practice);
  • self-learning.
Main providers

Vocational colleges in cooperation with companies

Share of work-based learning provided by schools and companies

50%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school
  • in-company practice
Main target groups

In 2012, the EUX programme was introduced with the aim of bridging the gap between general upper secondary education and vocational upper secondary education and training.

It also offers highly motivated young people the opportunity to gain both vocational qualifications providing direct access to the labour market and general qualifications providing similar opportunities to continue into higher education as students in the four general upper secondary programmes.

Entry requirements for learners (qualification/education level, age)

There are no minimum or maximum entry requirements concerning age.

EUX students must fulfil the requirements for IVET programmes, including a minimum grade 2 in Danish and mathematics.

Assessment of learning outcomes

To complete an EUX programme the student must pass a journeyman’s test concerning the vocational part of the programme and an examination in 6 upper secondary subjects (including Danish at level A) concerning the non-vocational part of the programme.

If a learner fails the journeyman test or an examination in one of the 6 subjects, it is possible to have a re-examination.

Diplomas/certificates provided

VET learners achieve both general and vocational upper secondary qualifications.

Examples of qualifications

Carpenter, blacksmith, electrician

Progression opportunities for learners after graduation

EUX graduates gain both vocational qualifications providing direct access to the labour market and general qualifications providing similar opportunities to continue into higher education as graduates of the four general upper secondary programmes.

Destination of graduates

Since EUX was only introduced in 2012, there are only a small number of EUX graduates so far. It is, therefore, too early to predict their progress in continuing education and training or the labour market.

However, there is no doubt that the EUX programme has succeeded in attracting a more motivated and dedicated type of student to VET ([34]A preliminary evaluation of EUX was published in 2017:
https://uvm.dk/aktuelt/nyheder/uvm/udd/erhvervs/2017/mar/170315%20eux%20har%20potentiale%20til%20at%20tiltraekke%20en%20ny%20type%20elever%20til%20erhvervsuddannelserne
).

Awards through validation of prior learning

Y

If the learner has obtained certain parts of IVET or upper secondary education, it is possible to acquire awards through validation.

General education subjects

Y

Key competences

Y

Key competences are part of the subjects in vocational colleges.

Application of learning outcomes approach

Y

Share of learners in this programme type compared with the total number of VET learners

Since its introduction in 2012, the EUX programme has become quite popular. In 2019, 32.2% of all students choosing VET wanted an EUX programme in order to obtain a full VET qualification and a study preparatory qualification as well. Consequently, Danish VET institutions are working intensively to develop new learning arrangements combining learning outcomes from VET and general upper secondary institutions.

EQF 3-5

VET programmes,

apprenticeships (EUD),

WBL 67%,

3-5 years

ISCED levels 353 and 354

Vocational upper secondary education and training programmes leading to EQF levels 3-5, ISCED levels 353 and 354 (Erhvervsuddannelse, EUD)
EQF level
3-5
ISCED-P 2011 level

353-354

Usual entry grade

9/10

Usual completion grade

12/13/14

Usual entry age

22

Usual completion age

28.9

Length of a programme (years)

5 (up to)

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

Y

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

The education ministry has decided that ECVET points should not be used in the Danish vocational training system.

In Denmark, it has been decided not to split up education programmes into modules to which ECVET, or other credit points, might be assigned. However, there are other countries in the EU that have introduced a credit points system. Therefore, there may be a need for a school receiving foreign pupils in mobility programmes to decide how many ECVET/other credit points the course corresponds to. In Denmark, the course of study is awarded ECVET points in relation to time. A full-time equivalent programme corresponds to 60 points.

Learning forms (e.g. dual, part-time, distance)

EUD, as the main upper secondary VET option, is organised according to a dual principle, alternating between a training placement, generally in an enterprise, and periods of college-based training.

EUD consists of:

  • the introductory basic programmes, which are predominantly school-based and combine theoretical, classroom-based learning with, to varying degrees, more practical workshop-based learning. For example, the commercial programme concentrates more on classroom-based learning than many of the more technical programmes. Basic programmes combine common competence goals, where students are given a broad introduction to the competences to be acquired in the associated main programmes and pursue specific competence goals aimed at individual programmes;
  • the main programme, consisting of several ‘steps’ (trin) and specialisations that divide the main programme into branches. While the exact distribution varies according to both the programme and the needs of the individual student, the main programmes generally comprise alternating periods of workplace-based training and college-based teaching in a ratio of 2:1.

College-based teaching in the main programmes can be divided into four types of subject:

  • general subjects;
  • trade-specific area subjects;
  • specialised subjects;
  • optional subjects.

College-based teaching in the main programmes is organized through an integrated approach, and students frequently work on projects where they are expected to incorporate what they have learned in different subjects and combine both general and more specialised competences.

Main providers

VET colleges

Share of work-based learning provided by schools and companies

>=60%

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Apprenticeships with:

  • practical training at school;
  • practical training in company.
Main target groups
  • young people (16-20) – main target group
  • young Adults (20-25)
  • adults (25+)
  • immigrants
Entry requirements for learners (qualification/education level, age)

Admission to basic programmes

Admission is offered to anyone who has completed compulsory schooling at Folkeskole or equivalent and obtained the pass mark in Danish and mathematics in the leaving examination from the ninth or 10th grade respectively, unless they have an apprenticeship contract with a company.

Young people attending the first part of the basic programme just after compulsory school must be declared ‘study-ready’, based on an assessment of their academic, personal and social competences conducted by either the college or the local youth guidance centre (Ungdommens Uddannelsesvejledning). These assessments consider a broad range of factors such as grades, motivation and conflict management skills and are used in compiling individual education plans (Elevplan).

Admission to main programmes

All students completing a basic programme are entitled to complete one of the associated main programmes. These programmes generally commence with an on-the-job training placement. As such, the student must not only have completed the relevant basic programme, but also have an apprenticeship contract with an approved training company prior to being admitted to the main programme.

The students are duty-bound to seek out suitable placements. When no suitable placements are available in a desired programme, students are offered admission to another associated main programme where placements are available. Another possibility is for the student to enter a training agreement with the college itself, where practical training also takes place in a Placement Centre.

For some programmes (32), admission to the second of the two basic courses is limited. This is to ensure that the number of students is aligned with labour market needs. In these cases, all students are either admitted in accordance with a quota or are required to have a training agreement with an enterprise prior to commencing the second part of the relevant foundation course.

Assessment of learning outcomes

Basic programmes are completed with a project which forms the basis of an externally graded examination. This is done by an external examiner appointed by the school and validated by the education ministry.

In the main programmes, there are various forms of assessment throughout the course, including both oral and written examinations, and both theoretical and practical project work. The exact form of assessment can differ from programme to programme.

Programmes include both subject-specific examinations (for example, in English or mathematics) and broader assessments to evaluate students’ abilities to combine the knowledge, skills and competences acquired from the programme as a whole.

The final examination, which generally takes place during the final period of college-based learning, also varies from programme to programme. In some cases, it consists entirely of a college-based examination; in others it comprises a combination of a college-based examination and a journeyman’s test (svendeprøve); in others it involves only the journeyman’s test conducted by local training committees.

However, most common is a combination of an assessment of project-based practical assignments and a theoretical examination, either oral, written or both. The relevant local trade committee nominates external examiners. Generally, two external examiners assess individual students in cooperation with the teacher. The training college, in consultation with the trade committees, develops the content of examinations. After passing the journeyman’s certificate, the graduate acquires a qualification at skilled-worker level and is able to enter the labour market ([35]Ministry of Education (2014b). Praktikpladsen: mødested for elever og virksomheder [Traineeships/internships: meeting place for students and companies].
http://www.praktikpladsen.dk/
).

Diplomas/certificates provided

The basic course examination leads to a certificate documenting the subjects and levels they have achieved; this certificate forms the basis for entering the main programme.

At the end of each training placement, the company issues a certificate to the college, the student and the trade committee listing the student’s achievements.

The successful passing of the final examination leads to a journeyman’s certificate; the graduate acquires a qualification at skilled-worker level and is able to enter the labour market ([36]Ministry of Education (2014b). Praktikpladsen: mødested for elever og virksomheder [Traineeships/internships: meeting place for students and companies].
http://www.praktikpladsen.dk/
).

Examples of qualifications

Flight mechanic, event coordinator, fitness instructor, multimedia animator, veterinary nurse: ‘small animals’, veterinary nurse: ‘horses’, veterinary nurse: ‘aide’, etc.

Progression opportunities for learners after graduation

Graduating from EUD main programmes gives access to tertiary education in the previously acquired field. Additional general subject qualifications ([37]These courses can be obtained at Adult Education Centres (VUC).) are required at higher levels in order to gain access to higher education.

Destination of graduates

The most recent figures for students completing an EUD programme in 2015 show that, 6 months later, only 8% were continuing in higher education ([38]http://statweb.uni-c.dk/Databanken/uvmdataweb/fullClient/Default.aspx?report=EOU-gf-overg6-tiludd-frafuldf&res=1366x560 ).

Improving pathways from VET to higher education is currently a political priority.

Awards through validation of prior learning

Y

It is possible to acquire awards through validation of prior learning, and the education institution receiving the student is responsible for this.

General education subjects

Y

College-based teaching in the main programmes includes general education subjects, including English, mathematics, Danish, etc. However, in VET, the content of these subjects is adapted to the particular programme so that, for example, mathematics for carpenters will concentrate on areas relevant to working as a carpenter and will be quite different from mathematics for veterinary nurses. General subjects also include other broad subjects such as product development and basic materials science. College-based teaching also includes optional subjects that might help them gain competences, which provide access to further education, such as qualifications in general subjects at a higher level.

Key competences

Y

Key competences are included in the subjects in the college-based part of VET, but are not taught as specific subjects.

Application of learning outcomes approach

Y

All educational orders, defining the framework of a VET programme are described in terms of learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

After completing ninth (compulsory) or 10th grade in 2018, 93% of all students chose some form of further education or training activity, either general upper secondary education (73.1%), or EUD vocational upper secondary education and training (19.4%). As suggested by the discrepancy in these two sets of figures, students in VET are generally older. While the average age for young people commencing general upper secondary education is 16.6, the equivalent for those entering VET is 22. Young people also take longer to complete VET programmes: the average age for those completing a general upper secondary qualification in 2017 was 19.5; in VET it was 28.9.

In 2019, 32.2% of young people applying for a VET programme chose the EUX programme.

Students entering VET basic programmes (EUD and EUX) 2019

EQF 3-5

Adult VET (EUV)

programmes

3-5 years

ISCED 353, 354

Basic vocational adult education programmes (equivalent to EUD) leading to EQF levels 2-3, ISCED 353, 354 (Erhvervsuddannelse for voksne)
EQF level
3-5
ISCED-P 2011 level

353, 354

Usual entry grade

Not applicable

Usual completion grade

Not applicable

Usual entry age

Average: 22 years

Usual completion age

Average: 28.9 years

Length of a programme (years)

1.5 – 5.5 years

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

Y

Is it offered free of charge?

Y

Is it available for adults?

Y

Aged 25 and above

ECVET or other credits

The education ministry has decided that ECVET points should not be used in the Danish vocational training system.

In Denmark, it has been decided not to split up education programmes into modules to which ECVET, or other credit points, might be assigned. However, there are other countries in the EU that have introduced a credit points system. Therefore, there may be a need for a school receiving foreign pupils in mobility programmes to decide how many ECVET/other credit points the course corresponds to. In Denmark, the course of study is awarded ECVET points in relation to time. A full-time equivalent programme corresponds to 60 points.

Learning forms (e.g. dual, part-time, distance)

It is a dual system consisting of:

  • school-based learning (contact studies, including virtual communication with the teacher/trainer);
  • work practice (practical training at school and in-company practice);
  • self-learning;
  • apprenticeships.
Main providers

Vocational colleges in cooperation with companies

Share of work-based learning provided by schools and companies

60%

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school/workshops
  • in-company practice
Main target groups

EUV programmes target low-skilled workers with at least two years of relevant work experience and allow acquisition of qualifications equivalent to EUD, which incorporate validation of prior learning.

Entry requirements for learners (qualification/education level, age)

Adults aged 25 and above

Assessment of learning outcomes

To complete a VET programme, learners need to pass a journeyman’s test (practical), organised by a professional committee. Some examinations in the school-based part of the programme are compulsory.

If a learner fails a journeyman’s test or an examination in a subject, re-examination is possible. Normally, three attempts are possible.

Diplomas/certificates provided

The basic course examination leads to a certificate documenting the subjects and levels they have achieved; this certificate forms the basis for entering the main programme.

At the end of each training placement, the company issues a certificate to the college, the student and the trade committee listing the student’s achievements.

The successful passing of the final examination leads to a journeyman’s certificate; the graduate acquires a qualification at skilled-worker level and is able to enter the labour market ([39]Ministry of Education (2014b). Praktikpladsen: mødested for elever og virksomheder [Traineeships/internships: meeting place for students and companies].
http://www.praktikpladsen.dk/
).

Examples of qualifications

Carpenter, blacksmith, electrician

Progression opportunities for learners after graduation

Those who complete VEU can enter the labour market or continue their studies at professional Academies.

Destination of graduates

Information not available ([40]ReferNet Denmark estimates the majority of graduates enter labour market.)

Awards through validation of prior learning

Y

The validation process in conducted by the vocational school and the relevant vocational teacher is responsible for the specific validation of prior learning. The process is a combination of validation of formal learning and practical assessment.

Prior to enrolment into adult vocational education, it is compulsory to have one’s prior learning and experiences assessed. Every adult above 25 years of age who intends to embark on vocational education should participate in Recognition of Prior Learning (so-called realkompetencevurdering, RKV, or RPL). This process takes between half a day and five days and leads the participant to one of three models:

  • EUV 1: the learner has at least two years of relevant workplace experience. This means that the practice-based periods of the course and its initial part/introductory basic programmes are left out (Basic Course 1; Grundforløb 1). In the case of mercantile vocational education, the primary part is included in the adult version;
  • EUV 2: the learner has less than two years of relevant workplace experience. An education plan should be drawn up reflecting the participant’s experiences, which will usually exclude the initial part and shorten the other parts;
  • EUV 3: the learner has no relevant workplace experience. Adults should follow the same education plan as young people, but should not have the initial part (Basic Course 1; Grundforløb 1, GF 1).
General education subjects

Y

Depending on the specific education programme, a number of subjects are included in the programme – for example Danish, mathematics.

Key competences

Y

Key competences are included in the subjects in the college-based part of VET, but are not taught as specific subjects.

Application of learning outcomes approach

Y

All education orders, defining the framework of a VET programme, are described in terms of learning outcomes.

Share of learners in this programme type compared with the total number of VET learners

The share of people aged 25 or more is 32% of the total VET learners.

VET available to adults (formal and non-formal)

Programme Types
Not available

General themes

Luxembourg’s education system (including VET) is shaped by the country’s political, economic, demographic and linguistic particularities, and strongly influenced by its:

  • relatively small territory;
  • multinational population and workforce: almost half of the country’s population have are foreign citizens (47%), among them the largest group being Portuguese (16%) and 24.6% from other European Union countries;
  • multilingualism: there are three official languages (German, French and Luxembourgish);
  • fast growing number of inhabitants since 1991 (the population has increased by 50% to a total of 602 000 inhabitants in 2018).

Distinctive features of VET ([1]Cedefop (2017.) Spotlight on vocational education and training in Luxembourg. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8112_en.pdf
)

Social partner involvement is a core principle in VET policy. The professional chambers act as independent policy institutes; they are represented in the tripartite advisory committee on vocational training and consulted on VET legislation. The 2008 reform reinforced their role, which includes involvement in developing and revising VET programmes. They also accompany enterprises and apprentices through practical training and organise CVET.

Learners have an opportunity to follow cross-border apprenticeship to acquire qualifications that Luxembourg’s education system cannot offer; the number of learners is not always sufficient given the small size of the country. Practical training in a company based in Luxembourg is combined with learning at school in one of the neighbouring countries. Teaching in vocational programmes has been based on units and modules since the VET reform of 2008, which was implemented until 2013/14 ([2]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle]. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
). Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Learner progression to general education or (pre-) VET in secondary education is guided based on achievements and interests, parents’ opinions and the view of education staff, including a (pre-) VET representative.

Close ties with neighbouring countries, multilingualism in all spheres of life and the high share of foreign citizens with a mother tongue other than one of the three official languages have a strong impact on VET. Luxembourg provides more language training than any other country, in terms of both the number of foreign languages studied per learner and time spent in learning. Multilingualism is a strength but also a challenge: the official language used varies, depending on the type and level of education and training.

Tackling youth unemployment and investment in skills are high on the policy agenda. Reinforced stakeholder involvement and youth guarantee measures aim to match young people’s skills/qualifications better to labour market demand, and to target the low-skilled. In line with the Europe 2020 headline targets, national policies focus on keeping the share of early leavers from education and training below 10%. One of the challenges is to ensure education and training equity, irrespective of origin or socioeconomic status. One of the education ministry’s priorities is to ensure a diversified offer to meet the needs of increasingly heterogeneous target groups. Implementation of the 2008 VET reform has revealed weaknesses in the system. Bringing about change was difficult: adapting to new realities was challenging for institutions, teachers and learners. Amendments to current legislation were developed to fine-tune the reform. The law of 22 June 2017 art. 12) which gives its legal basis to the House of Guidance (Maison de l’orientation) also foresees that each secondary school should develop its own clear and general guidance approach.

To give learners better opportunities in the labour market, the education ministry is expanding the apprenticeship offer in vocational and technician programmes.

There is a need for stronger links between the world of education and training and that of work. Emphasis has been put on dovetailing in-company and school-based training phases, and on strengthening on-the-job training requirements. In collaboration with professional chambers, the government promotes implementation of quality assurance in work-based learning. This implies defining the process that will ensure better quality without disrupting doing business.

Data from VET in Luxembourg Spotlight 2017 ([3]Cedefop (2017) Spotlight on vocational education and training in Luxembourg. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8112_en.pdf
).

Population in 2018: 602 005 ([4]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 28.1.2019].)

It increased by 12.1% since 2013 due to immigration ([5]NB: Data for population as of 1 January; break in series. Eurostat table tps00001 [extracted 28.1.2019].).

Luxembourg's population growth is mainly due to immigration, as the natural balance is relatively low. The share of foreigners in Luxembourg's total population is growing steadily.

As in many other EU countries, the population is ageing.

The old-age dependency ratio ([6]Old-age-dependency ratio is defined as the ratio between the number of persons aged 65 and more over the number of working-age persons (15-64). The value is expressed per 100 persons of working age (15-64).) is expected to increase from 21 in 2015 to 44 in 2060

 

Population forecast by age group and old-age-dependency ratio

Source: Eurostat, proj_15ndbims [extracted 6.05.2019].

 

Demographic changes have an impact on VET.

In 2018, Luxembourg had 602 005 inhabitants. Since 1991 the population has increased by 50% mainly due to immigration, which has a major impact on VET.

The figure below shows that 47% of the country’s population are foreign citizens ([7]Foreign citizens residing in Luxembourg can obtain Luxembourgish nationality by naturalisation. Legislation requires them to attend citizenship training and to pass an oral Luxembourgish language exam.). Their share has more than doubled in the past 25 years. In the first half of the 1960s most of the immigrants came from Italy. However, since 1966, the immigrant population from Portugal increased from 1 100 to 82 400 in 2011 ([8]The latest population census available from 2011.) and became the largest in the country. In 2018, the Portuguese community was 96 800 inhabitants (16.0%).

 

Population structure by nationality - 2018 (%)

Source: Statec 2018- Table b1101 [accessed 30.7.2018].

 

The share of the population with a foreign nationality and a mother tongue other than the official German, French and Luxembourgish languages is high. Multilingualism is one of the country’s strengths but it is also a challenge for education and training. The high share of foreign nationals requires education and training and labour market integration policies. A public agency for integration (Office Luxembourgeois de l'Accueil et de l'Intégration) under the auspices of the Ministry of Family, Integration and the Greater Region implements this policy. This includes providing information on training in the official languages and information about the recognition of foreign diploma and secondary general education ([9]General education is nationally referred to as ‘classical education.) and VET certificates and reports ([10]This information is also easily accessible at
www.guichet.lu and
www.lifelong-learning.lu [accessed 23.1.2019].
).

The economy has undergone structural changes in the past two decades (see Figure below). The industrial economy evolved into a service economy with jobs that often require tertiary level qualifications. Employment in the industrial sector decreased from 16.9% in 1997 to 9.0% in 2017. The service, professional, scientific and technical sectors and the administrative and support service sectors have had the highest growth, from 9.0% to 16.1%. Adapting VET provision to the constantly changing employment structure has been a challenge. In 2017, more than 40% of employment was concentrated in the following sectors:

  • wholesale and retail trade;
  • transport and storage;
  • accommodation and food service activities;
  • public administration and other public services.

The public administration includes civil servants and public employees from the State and municipalities and permanent staff from national railways. In 2016, there were approximately 11 204 teachers; 4 931 of these were in secondary general and technical education ([11]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

 

Employment by activity sector in 1997 and 2017 (%)

Source: Statec 2018 Table - B3003 Emploi salarié intérieur par branche d'activité - données désaisonnalisées 1997-2017

 

Access to skilled craftsperson and commercial activities and some liberal professions is regulated.

Commercial activities and skilled craftsmanship in the territory require a business permit, issued if the manager satisfies qualification requirements and professional integrity. Qualification requirements for skilled craftsperson companies differ depending on the trade. For main craft trades such as baker/confectioner, dental technician, specialist in mechatronics, the manager must have a master craftsperson certificate (brevet de maîtrise) or a bachelor degree (if not linked to the core business it should be complemented with at least two years of professional experience), or a vocational aptitude diploma (diplôme d'aptitude professionnelle, DAP) completed by managing experience of six years in the field. For secondary craft trades such as dry-cleaner/launderer, heating mechanic, the manager must have a DAP or similar in a related field or three years’ professional experience in the activity.

Total unemployment ([12]Percentage of active population, 25 to 74 years old.) (2017): 5.6% (7.6% in EU28), it increased by 1.4 percentage points since 2007 ([13]Eurostat table tps00203 [extracted 25.1.2019].).

 

Unemployment rate (aged 15-24 and 25-64) by education attainment level in 2008-18 ([14]Time series for the 15-24 group must be considered with caution due to the small number of observations taken into account.)

NB: Data based on ISCED 2011; breaks in time series.
ISCED 0-2 = less than primary, primary and lower secondary education.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_urgaed [extracted 16.05.2019].

 

Unemployment differed between those with low- and high-level qualifications only slightly for the age group 25-64 during 2008-18. In 2018 it was the lowest for VET graduates at ISCED levels 5-8 (4.1%) and highest for those at ISCED level 0-2 (6.5%). Since 2008 the unemployment rate of the age group 25-64 has increased for ISCED level 0-2 (by 1.7 percentage points) and 5-8 (1.9 pp.) but remained stable for VET graduates at ISCED level 3-4.

The age group 15-24, however, faced a much higher risk of unemployment during those years (2008-18), especially those having only ISCED level 0-2 who suffered unemployment of 22.4-19.9%.

Employment of 20 to 34-year-old VET graduates is high rate, but decreased between 2014 and 2018, from 88.6% to 81.6%. However, it was always higher than the EU-28 average which was 76.9% in 2014 but increased to 80.5% in 2018.

 

Employment rate of VET graduates (20 to 34 years old, ISCED levels 3 and 4) ([15]Time series must be considered with caution due to the small number of observations taken into account.)

NB: Data based on ISCED 2011; breaks in time series.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education
Source: Eurostat, edat_lfse_24 [extracted on 16.05.2019]

 

The employment rate of VET graduates (20 to 34 years old, ISCED levels 3 and 4) ([16]Time series must be considered with caution due to the small number of observations taken into account.) decreased between 2014 and 2018 by 7.5 percentage points; it increased from 76.9% to 80.5% across the EU-28.

The employment rate of all graduates aged 20 to 34 years was 85% in 2014 and decreased by 1.3 percentage points to 83.7% in 2018. Whereas the employment rate of VET graduates was still above that of all graduates in 2014, in 2018 the employment rate of VET graduates was the below that of all graduates ([17]NB: Break in series. Eurostat table edat_lfse_24 [extracted 16.5.2019].).

Among the working population aged 25-64, 41.9% had ISCED level 5-8, above the EU-28 average of 32.2%, but only 32.8% had ISCED level 3-4, 12.9 percentage points below the EU-28 level. 20.4% of the population only had a low or no qualification (ISCED 0-2), 1.4 percentage points below the EU-28 average.

 

Population (aged 25 to 64) by highest education level attained in 2018

NB: Data based on ISCED 2011. Low reliability for ‘No response’ in Czechia, Iceland, Latvia, and Poland.
ISCED 0-2 = less than primary, primary and lower secondary education.
ISCED 3-4 = upper secondary and post-secondary non-tertiary education.
ISCED 5-8 = tertiary education.
Source: Eurostat, lfsa_pgaed [extracted 16.05.2019].

 

Share of learners in VET by level in 2016

lower secondary

upper secondary

post-secondary

Not applicable

61.0%

100%

Source: Eurostat, educ_uoe_enrs01, educ_uoe_enrs04 and educ_uoe_enrs07 [extracted 31.1.2019].

 

Share of initial VET learners from total learners at upper-secondary level (ISCED level 3), 2016

NB: Data based on ISCED 2011; not applicable for Ireland.
Source: Eurostat, educ_uoe_enrs04 [extracted 31.1.2019].

 

In 2016/17, in lower, middle and upper technical secondary programmes (27 221 learners), there were more males (53%) than females (47%).

The share of early leavers from education and training has fallen from 7.7% in 2009 to 6.3% in 2018. It is below the national target for 2020 of no more than 10%, and the EU-28 average of 10.6% (2018).

 

Early leavers from education and training in 2009-18

NB: Share of the population aged 18 to 24 with at most lower secondary education and not in further education or training; break in series.
Source: Eurostat, edat_lfse_14 [extracted 16.5.2019] and European Commission: https://ec.europa.eu/info/2018-european-semester-national-reform-programmes-and-stability-convergence-programmes_en [accessed 14.11.2018].

 

However, these data are subject to important variations due to the small sample size in the country and may not allow easy identification of the causes of early school leaving at national level. In response to the lack of reliable data, the national education authorities produce annual statistics based on administrative data and on a survey of early school leavers. These data indicate a higher early leaving rate for those up to age 25 (13.5%) ([18]MENJE (2017b). Le décrochage scolaire au Luxembourg, année scolaire 2014-2015 [School drop out in Luxembourg, school year 2014/15]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/secondaire/statistiques-analyses/decrochage-scolaire/decrochage-14-15/index.html
) for 2015 than the rate calculated via the labour force survey for this year. The share of early leavers is relatively high among the migrant population, especially for those not having one of the three national languages as mother tongue.

Lifelong learning offers training opportunities for adults, including early leavers from education.

 

Participation in lifelong learning in 2014-18

NB: Share of adult population aged 25 to 64 participating in education and training; break in series.
Source: Eurostat, trng_lfse_01 [extracted on 16.05.2019]

 

Participation in lifelong learning in Luxembourg has been increasing in the past decade. While it was at 14.5% in 2014, it increased to 18.0% in 2018, almost seven percentage points above the EU-28 average.

 

VET learners in secondary education by age group

NB: VET learners include learners from lower, medium and upper technical secondary education

Source: National data.

 

The education and training system comprises:

  • pre-school education (ISCED level 0);
  • primary and lower secondary education (ISCED levels 1 and 2);
  • upper secondary education (ISCED level 3);
  • post-secondary non-tertiary education (ISCED level 4);
  • higher education (ISCED levels 5, 6, 7 and 8).

School attendance is compulsory between 4 and 16, i.e. for at least 12 years, including two years of pre-school education. At the end of primary education (enseignement primaire), learners receive an end-of-cycle report, stating the level attained for each competence domain. Learners are guided towards either general or vocational secondary education by dedicated councils, which include a teacher working in VET ([19]Following the Law of 29 August 2017 (SCL, 2017d) on secondary education ‘general secondary education’ is nationally referred to as ‘classical secondary education’ (éducation secondaire classique - ESC) while ‘technical secondary education’ is referred to as ‘general secondary education’ (éducation secondaire générale - ESG). However, to allow comparison at EU level, the previous terminology will be kept.). The guidance takes account of learning achievement (based on the end-of-cycle report), parent and teacher opinions and performance in standardised basic skills tests (in relation to the national average).

Secondary education comprises two types with different objectives:

- general secondary education (enseignement secondaire classique ESC) which conveys general knowledge in humanities, mathematics and natural sciences and prepares for higher education studies;

- vocational secondary education, nationally referred to as technical secondary education (enseignement secondaire général) which gives access to higher education and/or to the labour market.

Various programmes at post-secondary and tertiary levels are available as general; others as vocational pathways ([20]Based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

The Luxembourgish VET system comprises initial and continuing VET which are composed of several VET learning options:

  • school-based learning;
  • practical training at school;
  • in-company training in form of apprenticeship or short term work placements.

The dual system is an important feature of secondary VET (hereafter referred to as technical secondary education), which implies a strong relationship between school-based education and work-based learning in enterprises.

In technical secondary education (enseignement secondaire général, ISCED 353 and 354) learners are prepared both for professional life and enrolment in higher education. It is divided into three cycles:

(a) the lower cycle (cycle inférieur);

(b) the medium cycle (cycle moyen);

(c) the upper cycle (cycle supérieur).

A preparatory programme (programme préparatoire) supports learners who find it difficult to adapt to secondary education.

After successful completion of the lower cycle, learners can choose between technical, vocational and technician programmes. Depending on the programme, duration varies between six and eight years. Since 2013/14, all technical secondary programmes are based on principles implemented with the 2008 VET reform, providing also the possibility for learners to move from one type of secondary education to another. Tuition is in French, German and Luxembourgish.

Depending on the occupation, secondary VET programmes may be provided in technical secondary schools or in mixed schools that offer both technical and general secondary education. While most VET learners in 2016/17 attended public schools (86.9%), some were enrolled in private schools that apply national curricula (12.1%) or in private/international schools that do not apply them (1%).

Lower cycle

The lower cycle of technical secondary education (ISCED 244, EQF 1) is considered as pre-VET and lasts three years. It offers learners an orientation phase in which they can decide on their further education pathway. Upon successful completion, they can continue in the medium cycle of technical, technician or vocational programmes.

Practical activities in workshops make up an important part of the technical secondary programmes and focus on supporting learners in choosing their career.

Depending on their performance at the end of primary school, learners are directed to a preparatory (préparatoire) or orientation (orientation) path.

Medium and upper cycles

The medium and upper cycles of technical secondary education offer (mainly) school-based VET programmes, apprenticeships and similar schemes. Learners acquire occupational qualifications for which a certificate or a diploma is awarded. Schooling includes various training schemes, which last from six to eight years, depending on the chosen orientation. There are four different programmes within these cycles:

(a) technical programmes (régime technique) leading to a technical secondary school leaving diploma (diplôme de fin d’études secondaires générales) (ISCED 354, EQF 4);

(b) vocational programmes leading to a vocational capacity certificate (certificat de capacité professionnelle, CCP) (ISCED 353, EQF 2);

(c) vocational programmes leading to a vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) (ISCED 353, EQF 3);

(d) technician programmes (régime de la formation de technicien) leading to a technician diploma (diplôme de technicien, DT) (ISCED 354, EQF 4).

Learners can choose between three different training programmes which (can) include an apprenticeship contract and lead to different qualifications:

  • vocational capacity certificate (certificat de capacité professionnelle, CCP) at EQF level 2 always includes an apprenticeship contract. This programme is designed for learners facing difficulties in being accepted on another programme and lead to semi-skilled worker skills ;
  • vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) at EQF level 3 can be done under an apprenticeship contract or an internship contract. They provide the graduate access to the labour market as a skilled worker;
  • technician programme (diplôme de technician, DT) at EQF level 4 which are school-based and include a job placement of 12 or more weeks. They are mostly organised under an internship contract but can also be organised under an apprenticeship contract. This programme offers in-depth and diversified competences and a higher part of general education than the vocational programmes.

Learners are responsible for finding a training place in an enterprise. The vocational guidance service of the public employment service (Agence pour le Développement de l'Emploi, ADEM) supports young people through counselling and a central register of all available apprenticeship places.

Once the learner has signed a contract with a company, (s)he has the legal status of an apprentice and receives an apprenticeship allowance which varies between EUR 400 and 1 300 depending on the trade/profession learned ([21]https://www.lllc.lu/fr/formation-professionnelle-initiale/indemnites-d-apprentissage-nouveau-regime-dt-dap-ccp). Upon successful completion of an academic year, learners receive a premium allowance based on a monthly rate of EUR 130 for CCP or EUR 150 for DAP and DT. The best apprentices receive an award which also includes a prize of EUR 1 500.

Enterprises offering apprenticeship places need to comply with certain criteria, verified by the professional chambers. Financial support and an award to encourage their engagement are available. VET trainers, who receive special training, supervise the apprentices in the training companies. In accordance with the amended VET legislation of 2008, an apprenticeship is based on key principles such as:

• qualitative assessment of learning outcomes (transcript of acquired and non-acquired skills rather than marks in figures);

• modular system allowing apprentices who fail a required module to continue their training and catch up at a later stage during their apprenticeship ([22]Cedefop (2017.) Spotlight on vocational education and training in Luxembourg. Luxembourg: Publications Office.
http://www.cedefop.europa.eu/files/8112_en.pdf
).

Learn more about apprenticeships in the national context from the European database on apprenticeship schemes by Cedefop: http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/apprenticeship-schemes/scheme-fiches

The Ministry of National Education, Children and Youth ([23]Ministère de l'Éducation Nationale, de l’Enfance et de la Jeunesse (MENJE). Hereinafter referred to as education ministry.) is responsible for all types of education, including initial and continuing VET. Initial and continuing higher education is under the Ministry of Higher Education and Research ([24]Ministère de l'Enseignement Supérieur et de la Recherche (MESR). Hereinafter referred to as higher education ministry.). In cooperation with the Ministry of Labour, Employment and the Social and Solidarity Economy ([25], Ministère du Travail, de l’Emploi et de l’Économie Sociale et Solidaire (MTE). Hereinafter referred to as labour ministry.), the Ministry of National Education, Children and Youth is also responsible for training measures for the unemployed.

Higher education is under the responsibility of the higher education ministry.

Cooperation between the State and the social partners is a core principle in VET. As stated in the law reforming VET ([26]SCL (2008). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273–3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
), social partners are essential stakeholders who contribute to its organisation and implementation. The professional chambers’ opinion is systematically sought on laws and regulations on economic, financial and social policy: labour law, social security, taxation, the environment, initial and continuing vocational training, and education. Development and periodic revision of programmes are ensured by curriculum teams.

There are five professional chambers in Luxembourg. The Chamber of Commerce ([27]Chambre de Commerce.), Chamber of Trades and Skilled Crafts ([28]Chambre des Métiers.) and Chamber of Agriculture ([29]Chambre d’Agriculture.) represent employers. The Chamber of Employees ([30]Chambre des Salariés.), and Chamber of Civil Servants and Public Employees ([31]Chambre des Fonctionnaires et Employés Publics.) represent wage earners. These chambers act as independent policy institutes; they are involved in Luxembourg’s legislative procedures and are officially consulted on education matters. They are represented both at national (Economic and Social Council, Tripartite Advisory Committee on Vocational Training) and at European level (Cedefop Governing Board, Advisory Committee on Vocational Training). In contrast to trade unions and employers’ associations, membership in the professional chambers is compulsory (with an annual subscription) for all employees and private companies.

The professional chambers were created by law in 1924 ([32]SCL (1924). Loi du 4 avril 1924 portant création de chambres professionnelles à base élective. Mémorial A, A(2).
http://www.legilux.public.lu/leg/textescoordonnes/compilation/code_administratif/VOL_1/CHAMBRE_PROF.pdf
) and in 1964 (Chamber of Civil Servants and Public Employees ([33]SCL (1964). Loi du 12 février 1964 ayant pour objet de compléter la loi du 4 avril 1924, portant création de chambres professionnelles à base élective par la création d’une chambre des fonctionnaires et employés publics. Mémorial A, 13, 230.
http://www.legilux.public.lu/rgl/1964/A/0230/1.pdf
). They are public establishments, legal persons governed by civil law. Although the professional chambers are supervised by the government, they enjoy financial autonomy. Since 1929, the chambers have been involved in initial education, especially with regard to VET preparing for an occupation. They also have substantial powers regarding apprenticeships; in 1945, their remit in the establishment, supervision and termination of apprenticeship contracts was extended. Their power and involvement were reinforced by the 2008 law reforming VET ([34]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273–3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2 and SCL (2008b). Loi du 19 décembre 2008 portant révision du régime applicable à certains. Mémorial A, 207, 3135–3138.
). Their involvement in vocational training includes:

  • identifying training needs;
  • guidance and information on training;
  • determining the professions or trades offered in VET;
  • training offers;
  • organising training;
  • designing framework training programmes;
  • assessing training programmes and the training system;
  • qualifications and validating experience acquired.

Professional chambers have established a platform for supervisors/tutors where they can find all the necessary support during apprenticeship. They have also created the label ‘training enterprise’ to put the companies committed to training young people into the limelight.

The Chamber of Commerce and the Chamber of Trades and Skilled Crafts have appointed apprenticeship counsellors for each trade and profession. Their main mission is to inform companies and apprentices about vocational training issues (legislation, organisation, programmes, class visits). They also assist enterprises and apprentices in practical process where they:

  • can intervene as mediators in case of disagreement or conflict between the company, the school or the apprentice;
  • participate in organisation of intermediary tests and support the relationship between the school and the company in case of difficulties;
  • are available to apprentices who need to reorient themselves and find an appropriate apprenticeship;
  • follow their evaluation and, if needed or concerned, take part in the class council and in the disciplinary councils;
  • signal irregularities in legislation on vocational training to the competent institutions.

The professional chambers are also authorised by law to organise continuing training courses.

The Education Ministry has created two new structures, to improve the adaptation of schools to the needs of learners and the professional world.

A National Programme Council ([35]Conseil national des programmes.) was created alongside the National Observatory of School Quality at the beginning of 2018, to allow more exchanges and debates about educational matters and to build a bridge between the educational and professional worlds. It should represent the voice of society in discussions about school programmes. The council has eight members (at least three men and at least three women), chosen according to their experience and expertise in different fields such as culture, economics, ecology, associations and others ([36]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.
http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf
).

Total total government expenditure for public education in percentage of GDP increased from 4.8% in 2008 to 5.0% in 2017 ([37]Eurostat - Table gov_10a_exp [accessed 7.11.2018].). Luxembourg devotes the highest level of financial resources to education per learner among the OECD ([38]OECD - Table 10.1787/ca274bac-en [accessed 7.11.2018].) countries. At secondary level, the expenditure per learner is EUR 18 484, while the OECD average is about EUR 8 080 ([39]OECD (2015). Regards sur l’éducation 2015 [Education at a glance 2015].
http://www.oecd.org/education/education-at-a-glance-2015.htm
, [40]European Central Bank Euro foreign exchange reference rate as on 3 June 2016 EUR/USD=1.1154,
https://www.ecb.europa.eu/stats/exchange/eurofxref/html/index.en.html [accessed 9.1.2019].
).

In 2017, funding for initial public education was EUR 2.09 billion ([41]MENJE (2018b). Rapport d’activités 2017 [Activity report 2017]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/rapports-activites-ministere/rapport-activite-2017/index.html
), shared between the three levels of initial education: primary, general secondary, and technical secondary. Education is financed at two levels: central government and local administrations (106 municipalities).

In 2015, more than half (54.5%) of the funding went to primary education (EUR 928 million). At secondary level, expenditure on technical education was higher (EUR 517 million, 30.4% of total funding) than general education (EUR 258 million, 15.1% of total funding). It covered remuneration of teachers, administrative and technical staff, operating costs and investments.

 

Investment in education 2002-15

Source: MENJE 2018.

 

Public funding for general and VET schools was slightly, but constantly, increasing up to 2012. In 2013, it fell by 3.7% but increased in 2014 (+8%) and remained stable in 2015 (+1%). There was a break in time series in 2009; since then the State has been fully in charge of remunerating primary education teachers, previously shared between the State and the communes.

Public funding includes:

  • teachers’ salaries;
  • non-teaching staff salaries;
  • current expenses (goods and services to ensure the daily functioning of educational services; school allowances; care of children outside school hours at municipal level for extra-curricular and after-school activities; the costs incurred by school medicine and school transport);
  • capital expenses (movable and immovable assets).

 

School funding in 2015, % (EUR million)

Source: MENJE (2018). The key figures of national education : statistics and indicators 2016-17. http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html

 

As shown in the above figure, salaries make up the highest costs of all education programmes (73-77%). The share is greater in primary education (77%) than in secondary education. The share of current expenses is higher in primary (14.5%) education than in general (12.5%) or in technical (13.0%) secondary education, possibly because care of children outside school hours at municipal level is costlier at this level.

 

Funders of public education in 2015

Source: MENJE (2018). The key figures of national education: statistics and indicators 2016-17. http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html

 

According to the latest available data, total central government expenditure (the cumulative expenditure of the various ministries and administrations involved in the financing of education) was nearly EUR 1 390 million. With a total contribution of 81.7%, the State is the primary funder of education in Luxembourg. The 106 communes contribute 18.3%, or about EUR 311 million.

Apart from national funds, money spent on public education can also come from foreign sources. The Schengen-Lyzeum Perl is a German and Luxembourgish high school set up in 2007, located in Germany close to the border. Learners can acquire the general and technical secondary school leaving diplomas (administrative and commercial division). The Landkreis Merzig-Wadern (LKMV), a German neighbouring district, pays 60% of the running costs and 50% of the building maintenance and investment in school equipment. The Luxembourg State pays the other part.

Funding for individuals in higher education

The government offers higher education learners financial support in the form of a grant and a loan (basic grant: EUR 1 000, mobility grant: EUR 1 225, grant on social criteria: EUR 0 to 1 900, family grant: EUR 250, student loan: EUR 3 250, registration fee: EUR 0 to 1 850) per academic semester: the grant and loan proportions depend on the applicant’s income ([42]http://portal.education.lu/etudes/Laide-financi%C3%A8re [accessed 6.3.2017].). Tuition fees are taken into account when calculating the financial support. In each academic year, higher education learners apply for the support twice: before the winter and summer semesters ([43]SCL (2010). Loi du 26 juillet 2010 concernant l’aide financière de l’état pour études supérieures. Mémorial A 118, 2039 - 2043.
http://www.legilux.public.lu/leg/a/archives/2010/0118/a118.pdf#page=2
).

Funding continuing VET

Continuing training for employees or for individuals (private initiative) is normally funded by the enterprises or individuals themselves. However, in some sectors, companies must pay a levy to sectoral training providers to benefit from specific access conditions and prices. Companies may also contribute to training centres voluntarily to benefit from specific access conditions and prices. Companies and individuals can receive support and incentives for CVET, often non-financial but linked to working time arrangements.

Funding training for the unemployed and other vulnerable groups

Training for the unemployed and other groups excluded from the labour market is supported by the labour and the education ministries. The labour ministry finances training schemes run by the national centres for continuing vocational training and training schemes run by private centres under contract with the labour and the education ministries. The public employment service also provides financial support for different training programmes for job seekers.

Some projects for job seekers are jointly financed by the European Social Fund. Most are focused on job segments with a high development potential, such as Fit4coding (development of skills for the IT sector) or Fit4 Greenjobs (in cooperation with Institute for Construction Training - IFSB) ([44]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.
http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf
).

The Law of 25 March 2015 established different teacher careers in the Luxembourgish educational system.

Teacher career

Type of teacher

Type of teaching

Required diploma

Secondary school Teachers A1

Technical and general secondary education

BA and MA

Technical education Teachers A2

Technical secondary education

BA

Master of technical education B1

Technical secondary education

Master craftsman diploma or BTS

There are no additional specific access or training requirements for VET teachers beyond a diploma and language requirements (proficiency in the three administrative languages). Recruitment procedures and training provisions for teachers in general secondary education are the same as for teachers in technical secondary education.

All teacher applicants must have a relevant bachelor or master degree for the subject that is being taught. They must pass an examination, and complete a three-year induction course at the Training Institute of National Education (Institut de formation de l’Éducation nationale, IFEN) created in 2015 ([45]SCL (2015). Collection of laws concerning the Training Institute of National Education. Mémorial A, 166.
http://www.legilux.public.lu/leg/a/archives/2015/0166/a166
). During the induction course, future teachers are already teaching at secondary schools while attending a teacher education programme at the IFEN. The induction course ends with a final examination.

Luxembourg University has provided a master degree in secondary education since the 2016-17 academic year, accessible to students holding a bachelor degree in maths, Romance or German languages, who wish to develop the necessary didactic skills to teach in class. Trainee teachers can thereby acquire teaching skills before applying for the examination at the IFEN. The programme includes courses in educational sciences, sociology of education, and psychology, to provide learners with the necessary skills to understand and meet the challenges of teaching in a multicultural and multilingual school system. Four options are available: maths, French language and literature, German language and literature, Luxembourgish language and literature.

The Chamber of Commerce has a training programme for teachers providing continuing vocational training, to facilitate the transfer and appropriation of knowledge by learners. This programme provides fundamental tools for effective teaching, as well as specific aspects to help perfect teachers’ pedagogic approaches.

The law of 19 December 2008 stipulates that an enterprise offering training or apprenticeship has to designate one or more tutors to mentor apprentices throughout their apprenticeship. The tutor is in charge of the practical training and the pedagogic supervision of the apprentice. He is also appointed as the contact person for the apprenticeship counsellor and the competent professional chamber with regard to the progress of the apprentice. The law has increased the responsibility of the tutor for training and assessment of the apprentices. The training of tutors has become central to increasing and assuring the quality of initial and continuing vocational training and in promoting the recognition of diplomas and certificates across the borders. Participation in tutor training is mandatory for each enterprise involved in the training of one or more apprentices. Each tutor has to undergo three-day training, organised by the competent professional chamber. A trainer holding a master craftsperson diploma (Brevet de Maîtrise) or equivalent is exempted from this mandatory training. The training Tuteur en Entreprise (Tutor in company) comprises a legal section, a pedagogic section and a section on assessment. It gives tutors useful tools to set up a training path, manage the relationship with the apprentice, identify the mission of the tutor and be able to help apprentices integrate in the working world and the enterprise ([46]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

The Training Institute of National Education (IFEN) designs, implements and evaluates the professional insertion (internship) and the continuing professional development of teachers and psycho-social staff in education.

Continuing professional development has become increasingly important over the years and is now considered a professional duty in the Luxembourgish education system. A new regulation has entered into force, in which the minimum mandatory continuing training for secondary school teachers has been increased to 48 hours over three years. Within the SCHiLW framework (Schulinterne Lehrer/innen-Weiterbildung - School teachers’ continuing training), the IFEN supports secondary schools that are willing to set up training plans (plans de formation, not compulsory). These plans contribute to greater coherence between the school’s objectives and teachers’ training activities.

The continuing training offer is elaborated by the IFEN in collaboration with school staff, who are consulted annually, and upon their request. IFEN endeavours to meet individual needs that have been identified at various levels, as well as political decisions. Continuing professional development is therefore organised according to training objectives and the availability of the teachers being trained, such as seminars (one-off training courses), training days, conferences, sequential continuing training (introductory module followed by a practical phase which may or may not be accompanied by an exchange and intensification phase). In a period of rapid technological change, it is essential that VET teachers continuously update their vocational skills and knowledge, to ensure trainees leave the VET system with skills that can be put into practice immediately.

In order to contribute to the academic success of learners, training offered aims to develop, in priority, the following teachers’ professional skills:

  • priority 1: teaching and learning in a competence-based approach;
  • priority 2: teaching and learning language skills in a multilingual context;
  • priority 3: information and communication technologies;
  • priority 4: teamwork and communication;
  • priority 5: personal professional development;
  • priority 6: school development;
  • priority 7: school management;
  • priority 8: socio-educational work.

Each year new continuing training courses are proposed in order to answer to individual needs or needs identified at regional or national level.

VET standards are developed in cooperation between the education ministry and the professional chambers. Curricula are based on occupational standards and informed by skill needs in enterprises. The following institutions ensure VET provision in line with labour market needs:

  • Permanent Labour and Employment Committee (Comité Permanent du Travail et de l’Emploi): the ministries of education and labour, cooperate through this committee. It is responsible for reviewing the labour market situation regularly. Its working methods include analysis of job supply and skills demand;
  • Training Observatory: established in 2012 by the National Institute for the Development of Continuing Vocational Training (INFPC); it provides the government and social partners with detailed statistics and reliable qualitative analyses on training issues; these are useful insights for public policy and private strategies in the lifelong learning domain;
  • Employment Observatory: established by the labour ministry; analyses labour market data, publishes a labour market dashboard and organises annual conferences on relevant labour market issues and employment;
  • Competence Observatory: to help improve initial and continuing training offers, the University of Luxembourg competence centre (previously Luxembourg International University Institute - Institut Universitaire International Luxembourgeois, IUIL), in cooperation with companies, identifies and anticipates competence needs in sectors and occupations. Analyses cover the trade, law, health, food and catering sectors, management, socio-professional integration and green professions;
  • Business Federation of Luxembourg: since 1997 has conducted annual surveys ([47]This survey is conducted in collaboration with the Luxembourg Bankers' Association, the Luxembourg Confederation of Commerce, the Chamber of Commerce and the education ministry, with support from the European Union (EURES).) on skill needs, alternatively in the industrial and in the information technology and communication sectors. It explores skill needs of enterprises to achieve a good balance between vocational training supply and labour market demand. The survey is the basis for the Qualifications of tomorrow (Les qualifications de demain) publication. It offers forecasts of enterprise skill requirements for replacements and new job openings, and the associated qualification levels. The publication provides young people and their parents with insights into education paths and encourages public authorities, professional chambers and other VET actors to take account of enterprises’ training needs in CVET ([48]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

See also Cedefop’s skills forecast ([49]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/skills-forecast) and European Skills Index ([50]https://skillspanorama.cedefop.europa.eu/en/indicators/european-skills-index)

The development of the VET qualifications is based on the following elements:

  • occupational profile: lists the areas of activities as well as the activities and tasks of future occupations after two to three years of workplace experience;
  • training profile: based on the occupational profile by areas of competence: occupational and general competences;
  • training programme based on the training profile:

- defines the learning outcomes for each competence and regroups them by learning domain;

- organises the learning domains and outcomes in modules and credits;

- curriculum: determines the content of the different modules.

The main bodies responsible for designing qualifications are curriculum teams and national vocational commissions ([51]SCL (2011). Règlement grand-ducal du 30 juillet 2011 portant institution et organisation des équipes curriculaires, des commissions nationales de formation et des commissions nationales de l’enseignement général pour la formation professionnelle de l’enseignement secondaire technique. Mémorial A 173.
http://legilux.public.lu/eli/etat/leg/rgd/2011/07/30/n3/jo
). A curriculum team is associated with a specific profession or group of professions; training centres and schools are equally represented. The education minister decides on the maximum number of representatives for each team. The curriculum team:

  • develops and revises programmes for the trades and professions it is responsible for;
  • ensures consistency between the objectives of school-based and work-based training;
  • provides guidelines and procedures for continuous assessment of learners at school and in the workplace, in cooperation with the respective committees. The guidelines and procedures feed into evaluation frameworks adopted by the education minister;
  • develops and evaluates the ’integrated project’ (projet integré) that replaces the former final exams. The project aims to check whether the learner has developed the complex competences needed to solve a real or simulated work situation.

National vocational commissions (commissions nationales de formation) exist for each division, trade and profession of general and technical secondary education; they propose course content, methods and evaluation criteria to the education minister. The commissions are made up of:

  • a teacher from each school where vocational or technician programmes are offered;
  • a representative of the national general education commissions, designated by the minister;
  • a representative of each professional chamber associated to the training;
  • representatives of the higher council of health professions and employer representatives in the case of health sector professions;
  • employer representatives of education and social institutions, in the case of social sector professions.

A Division for Curriculum Development ([52]SCL (2017). Loi du 14 mars 2017 portant modification de la loi modifiée du 7 octobre 1993 ayant pour objet: (1) la création d’un Service de Coordination de la Recherche et de l’Innovation pédagogiques et technologiques; (2) la création d’un Centre de Gestion Informatique de l’Éducation ; (3) l’institution d’un Conseil scientifique. Mémorial A 439.
http://memorial.lu/eli/etat/leg/loi/2017/03/14/a439/jo
) was created within the Department for Coordination of Educational and Technological Research and Innovation (SCRIPT) within the Ministry of Education, to simplify the implementation of the 2008 reform. It provides support to the national commissions of programmes in elementary and secondary education, as well as the curriculum teams and national vocational commissions of vocational training, assisting in their tasks, developing and adapting curricula. This division coordinates the work of national commissions, guarantees the implementation and supervises the coherence and consistency of curricula. The division works in close collaboration with various stakeholders to guarantee the scientific framework of curriculum development. It also works in collaboration with the recently installed National Programme Council.

The development and implementation of the European qualifications framework for lifelong learning (EQF) is seen as an opportunity to make explicit the existing education and training levels and the links between them. The key objective of the eight-level national qualifications framework (cadre luxembourgeois des qualifications, CLQ) is to increase the transparency of qualifications. The CLQ serves as a non-binding guiding framework for stakeholders: individuals, education and training providers, and the labour market.

The CLQ was referenced to the EQF and the qualifications framework in the European higher education area (QF-EHEA) in 2012. Beginning in 2014, a committee represented by the education ministry and the higher education ministry published a report which detailed the links between the CLQ and the EQF and to the QF-EHEA. Levels 6-8 include qualifications awarded by Luxembourg University only. VET qualifications have been assigned to EQF levels 2-5, with the higher technician and the master craftsperson certificate, for instance, at the latter.

The philosophy of the CLQ is to show that lifelong learning is not fragmented and that it should not be restricted to formal qualifications. The referencing report, however, only reflects formal education and training, which is changing and moving towards a learning outcomes approach. Once this change is complete, a new report reflecting an adjusted lifelong learning framework, including qualifications acquired through non-formal and informal learning, will be published ([53]Based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

A national approach to quality assurance has been devised, and evaluation and review procedures are in development stage. There is no real quality framework, but legislation and the current organisation take the quality component into account.

Quality standards for VET providers are part of legislation and are used for accreditation and funding. Guidelines and standards are used to promote a culture of continuous improvement. Over the past 10 years, the education and training system has been overhauled to provide the resources needed to cope with the challenges of a rapidly changing environment. Administrative structures have been changed to allow modern school management with a degree of autonomy. In 2004, the legislation promoted partnership-based school community approaches and school initiatives to improve the quality of education. For VET programmes the education ministry coordinates the implementation of the EQAVET recommendation ([54]See EQAVET recommendation at
http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32009H0708(01)&from=EN [accessed 6.3.2017].
).

National indicators related to the 10 proposed by the recommendation are used and monitored nationally. While most are applied in IVET, their use for CVET, which is not monitored centrally, varies by sector or provider.

Secondary education - School development plan, PDS ([55]Plan de développement de l’établissement scolaire (PDS).)

The school development plan (PDS) was introduced by the law of 15 December 2016 ([56]SCL (2016). A-N° 263 du 21 décembre 2016.
http://legilux.public.lu/eli/etat/leg/loi/2016/12/15/n1/jo
).

Schools should describe their school and extracurricular activities in the school development plan to outline their profile and analyse their general situation, as well as constantly to develop and innovate. This approach covers domains that may help their learners receive the best quality education. Each school should elaborate its own steps in a series of areas that are critical for success.

Seven domains are foreseen for secondary education:

  • organisation of pedagogical support. Each learner should have access to remedial measures that meet their needs and capabilities;
  • supervision of children with specific needs to provide tailor-made solutions for their needs and support their learning process;
  • partnerships with parents to improve their involvement in the schooling process and create a partnership culture between families and schools;
  • integration of information and communication technologies (ICT) to prepare learners for the challenges of the employment market influenced by ICT;
  • psycho-social support for learners who face problems at school, or have psychological or family problems, to prevent school dropouts/failure;
  • relevant guidance for learners to help them make the right choices, according to their profiles;
  • extracurricular activities to guarantee equal access for all learners to non-formal learning opportunities, in addition to mainstream classes.

For each of these domains, national objectives have been defined in a national reference framework. Secondary schools are free to choose the domains and objectives they need to focus on.

The school development plan also contains:

  • definition of at least one objective from the description and analysis mentioned above;
  • an action plan for each objective (persons in charge, resources needed, schedule, evaluation criteria);
  • an evaluation and continuous adaptation of the current PDS.

Following the law of December 2016 ([57]SCL (2016). A-N° 263 21 décembre.
http://legilux.public.lu/eli/etat/leg/loi/2016/12/15/n1/jo
), as of the 2017/18 school year each secondary school should elaborate a PDS produced by a school development committee ([58]Cellule de développement scolaire (CDS).). The school development committee is coordinated by the school directorate and includes school staff appointed by the director for a three-year period that may be renewed. Its mission is to analyse and interpret the school’s data, to identify the school’s priority needs, to define school development strategies, to elaborate the school charter, the profile and the PDS, and to ensure internal and external communication, while establishing a triennial plan for the continuing training of its high-school staff.

The Division for the Development of Schools ([59]Division du développement des établissements scolaires.) from the Department for Coordination of Educational and Technological Research and Innovation (SCRIPT) was set up according to the law of 14 March 2017 ([60]SCL (2017). Loi du 14 mars 2017 portant modification de la loi modifiée du 7 octobre 1993 ayant pour objet: (1) la création d’un Service de Coordination de la Recherche et de l’Innovation pédagogiques et technologiques; (2) la création d’un Centre de Gestion Informatique de l’Éducation; (3) l’institution d’un Conseil scientifique. Mémorial A 439.
http://memorial.lu/eli/etat/leg/loi/2017/03/14/a439/jo
). Its mission is to accompany schools in their general approach to school development and, more specifically, to elaborate and implement the PDS, collaborating with various departments, educational structures, national and international partners, who may to optimise the quality of schools. The Division for the Development of Schools has provided several transversal tools, such as a website ([61]https://portal.education.lu/developpementscolaire/Accueil-Lyc%C3%A9es) dedicated to the development of schools, forms allowing schools to coordinate and follow up their PDS, and adaptable questionnaires to facilitate data collection about the perception of school actors.

The school development committee has been working on the PDS since September 2017; it was then adopted by the Education Ministry in September 2018.

A National Observatory of School Quality ([62]Observatoire national de la qualité scolaire.), created at the start of 2018, is responsible for evaluating and supervising the quality of the education system. It is an independent structure. The observatory systematically evaluates the quality of the school system and the implementation of education policies. It does not assess the individual work of teachers, but the organisation and operation of schools and the Ministry of Education. The observatory is composed of eight observers, from public or private sectors, who are totally independent. They visit schools and meet representatives for various school stakeholders, such as parents, learners and teachers, and have exchanges with Education Ministry departments. The Observatory produces an annual activity report and at least one thematic report on a priority area. Every three years, it produces a national report on the school system with its findings and recommendations.

These reports are transmitted to the Government and the Chamber of Deputies and made accessible to the public.

The Division for Data Analysis of The Department for Coordination of Educational and Technological Research and Innovation (SCRIPT) is commissioned to collect and analyse data on the quality of the education offer by analysing school reports or in the context of a project. The results of the surveys may be consulted during the elaboration of a PDS or before making decisions to improve the school’s organisation. This division organises national and international standardised tests. Standardised tests elaborated by the Luxembourg Centre for Educational Testing (University of Luxembourg) and common tests are used as instruments of formative or summative evaluation or the individual learner guidance process. International tests like the OECD’s PISA (Programme for international student assessment), the IEA’s ICILS (International computer and literacy study) generate results which help with the governance of the education system.

Tertiary education

Short-cycle programmes leading to higher technician certificates (BTS) ([63]Brevet de technicien supérieur.) are evaluated externally before being accredited by the higher education ministry for a period of five years. After this time, the accreditation has to be renewed through a new evaluation. This procedure should ensure that the programmes are relevant to the related professional sector ([64]SCL (2010). Règlement ministériel du 15 mars 2010 portant sur l’accréditation des programmes de formation menant au brevet de technicien supérieur. Mémorial A 65.
http://legilux.public.lu/eli/etat/leg/rmin/2010/03/15/n1/jo
).

The university is largely free to design and implement its own quality assurance processes. At Luxembourg University, quality culture and regular quality control through internal and external evaluation of teaching, research and technical, administrative and logistics services are key elements. External audit of the University of Luxembourg has been conducted every four years since 2008 by an external evaluation committee. The independent Committee of External Evaluation is appointed by the Minister for Higher Education and Research.

The University of Luxembourg produces a key performance indicators report in the frame of a multiannual development contract between the Luxembourgish government and the university (2014-17) ([65]Contrat d’établissement pluriannuel entre l’Etat et l’Université du Luxembourg, 2014-17.); this includes publications per researcher, bachelor degrees awarded, master degrees awarded, and master recruitment rate.

Luxembourg has been a member of the European quality assurance register for higher education (EQAR) since 2008 ([66]Although there are no agencies registered in Luxembourg three foreign EQAR agencies operate in the country.).

Continuing VET

Even though there is no real quality framework, quality is a major concern and is covered in the legislation and in the organisation of CVET. Quality will be a major issue in the future of CVET.

The white paper on the national lifelong learning strategy ([67]Anefore (2012). Livre blanc - Stratégie nationale du lifelong learning [White book on the national lifelong learning strategy].
http://www.men.public.lu/catalogue-publications/adultes/informations-generales-offre-cours/livre-blanc-lifelong-learning/131025-s3l-livreblanc.pdf See also
www.S3l.lu
), defines six cross-cutting key principles and related measures and recommendations for implementation. These include developing the quality of lifelong learning and establishing a framework for the quality of adult education and training. This framework will be based on:

  • a quality label awarded to training providers that meet specified criteria in structure and content of the training offer;
  • accreditation of training offers. A working group on training provider accreditation was set up in 2014.

A quality label for municipal governments and non-profit associations can be awarded in CVET by the education minister for a five-year period ([68]SCL (2000). Règlement grand-ducal du 31 mars 2000 ayant pour objet: (1) de fixer les modalités des contrats conventionnant des cours pour adultes et les conditions d’obtention d’un label de qualité et d’une subvention; (2) de créer une Commission Consultative à l’Education. Mémorial A 34, 846-848.
http://www.legilux.public.lu/leg/a/archives/2000/0034/a034.pdf#page=2
). Courses must be of general interest in so-called areas of general education and social advancement. They must meet educational and financial quality criteria. Objectives and course content must be in line with the priorities for adult education.

Quality criteria and priorities are defined for periods of up to five years by the education ministry based on the advice of the Adult Education Advisory Committee ([69]Commission Consultative à l'Éducation des Adultes.). The committee consists of the persons in charge of the Adult Education Department, two representatives delegated by schools offering evening classes, a representative of the Department of Vocational Education and a private sector representative. The committee may also involve adult training experts in its work.

While some private providers commit to quality assurance approaches, a large part of adult education is not subject to systematic evaluation or quality assurance ([70]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

The 2008 legislation ([71]SCL (2008). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience.

Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([72]SCL (2010). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([73]SCL (2016). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the minister. Validation is possible for technical school-based programmes, all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma, or to a part thereof. Experience must be directly related to the requested certification. At higher technician certificate level, an ad hoc evaluation committee is set up for each individual asking for recognition of prior learning.

At university level, validation of non-formal and informal learning allows experience to be recognised with a view to accessing various bachelor or master university studies. The request is considered by a board of examiners whose members are appointed by the chancellor, following recommendation of the dean of the relevant faculty.

Formal VET leads to seven European qualification levels (1 to 7). The 2008 legislation ([74]SCL (2008). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience.

For more information about arrangements for the validation of non-formal and informal learning please visit Cedefop’s European database ([75]http://www.cedefop.europa.eu/en/publications-and-resources/data-visualisations/european-database-on-validation-of-non-formal-and-informal-learning).

Individual training leave

The objective of individual training leave is to ease access to continuing training. Employees working in a company for at least six months, self-employed workers and individuals in a liberal profession (and having been affiliated to the social security system for at least two years) can benefit from 80 days of paid leave during their entire career, but not more than 20 days per two years. Employers can have salaries reimbursed by the government. Training must be provided by an institution issuing certificates recognised by the government. The employee is required to submit a request to the education ministry which then approves the leave – stating the number of days granted – or refuses it.

Language training leave

Language training leave allows employees, the self-employed and individuals in a liberal profession of all nationalities to learn Luxembourgish for social and professional integration. The courses take place during normal working hours. The maximum paid leave is 200 hours over a professional career. Each leave hour entitles employees to a compensatory allowance equal to their average hourly salary paid by the employer. The employer advances the allowance and is reimbursed 50% by the State. The request must be sent to the labour ministry by the employer prior to the start of the course; the leave can be deferred by the employer if it disrupts company operations.

Unpaid training leave and personal working time arrangement

The 2006 Grand Ducal regulation on the organisation of working time (organisation du temps de travail) ([76]SCL (2006). Règlement grand-ducal du 30 mars 2006 portant déclaration d’obligation générale d’un accord en matière de dialogue social interprofessionnel relatif à l’accès individuel à la formation professionnelle continue conclu entre les syndicats OGB-L et LCGB d’une part et l’Union des Entreprises Luxembourgeoises, d’une autre. Mémorial A 85.
http://legilux.public.lu/eli/etat/leg/rgd/2006/03/30/n2/jo
) stipulates a general obligation to reach an agreement on access to CVET through inter-occupational social dialogue to be signed between the trade union federations and the Union of Enterprises. Organising working hours within a flexi-time arrangement and unpaid leave for vocational training purposes is part of this regulation.

Unpaid training leave releases a worker from duties to take part in professional training. The agreement applies to private sector employees who have been employed for at least two years, regardless of the type of employment contract. During the leave, the employment contract is suspended. The employer can refuse the unpaid leave, if the applicant is a high-level executive or if the company has fewer than 15 employees. The employer can also defer the unpaid leave for up to one year where the leave is no more than three months or for up to two years where the leave exceeds three months.

Employees working flexi-time may request amendment of their working time to support participation in training. The employer can refuse to grant such an amendment based on operational needs or impact on the efficient organisation of the business.

Tax exemptions

Every income tax payer may deduct expenses for professional development from taxable income. Such expenses must have a direct link with the business activity performed by the employee and allow improving professional knowledge. They must be paid by the participant and refund claimed through a tax declaration ([77]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

State shared funding for CVET

A company can receive State funding (operated by the education ministry) for investment in CVET. Private companies established in Luxembourg that undertake most of their activities inside the country are eligible. The training targets:

  • employees affiliated with the national social security system;
  • persons bound to the company by an employment contract (fixed-term or permanent);
  • subcontractors working for the applicant company;
  • owners of craft, trade, industry, agriculture or forestry companies.

Investment in training is capped according to the size of the company:

  • at 20% of total payroll for companies with 1 to 9 employees;
  • at 3% of total payroll for companies with 10 to 249 employees;
  • at 2% of total payroll for companies with more than 249 employees.

The share of funding is calculated based on the investment in CVET ([78]SCL (2018a). Loi du 13 mars 2018 portant création d’un Observatoire national de la qualité scolaire. Mémorial A 183.
http://legilux.public.lu/eli/etat/leg/loi/2018/03/13/a183/jo
). Companies receive direct grants: 15-35% of investment (depending on employee profiles).

Support for learning Luxembourgish

Private sector companies legally established in the country can partly recover the costs associated with learning Luxembourgish. Eligible costs include training fees and the costs of study materials and are paid by the labour ministry.

Funding for additional apprenticeship places

The fund for employment provides financial support for the creation of apprenticeship places to encourage enterprises to hire apprentices. It partly reimburses the apprenticeship allowance (27% for vocational DAP programme ([79]Vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP).) and 40% for the vocational CCP programme ([80]Vocational capacity certificate (certificat de capacité professionnelle, CCP).)) and covers the employer’s share of social security costs for the apprentice ([81]SCL (2012). Règlement grand-ducal du 31 octobre 2012 fixant les conditions et modalités des aides et primes de promotion de l’apprentissage. Mémorial A 239, 3153-3154.http://www.legilux.public.lu/leg/a/archives/2012/0239/a239.pdf#page=5). Applications for financial support must be submitted by the enterprises and the apprentice to the public employment service before 1 July of the year following the year in which the learning ended.

Apprenticeship award for a training company

Since 2013, the award for the best training company has been presented each year during the apprenticeship graduation ceremony to the company that commits itself most to apprenticeships (creation of apprenticeship places, follow-up of apprentices) ([82]This section is based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf).

Most guidance services offered during secondary education, operate within the guidance house (maison de l’orientation, 2012). The initiative centralises administrations and counselling services that help people move into working life. It focuses on young people but anyone can find information and advice there. The guidance house includes:

  1. the vocational guidance service of the public employment service (Adem) which provides information on trades/professions and apprenticeship placement;
  2. the Psycho-Social and Educational Accompaniment Centre (CePAS) which helps learners in their school or career guidance and may provide psychological support;
  3. the National Youth Service (SNJ) which supports the acquisition of practical experience through the voluntary Youth Service;
  4. the Local Bureau for Youth (Antennes locales pour jeunes) which offers individual coaching to achieve school or professional projects;
  5. the school reception centre for newcomers for 12 to 17 year-old immigrant learners;
  6. the Centre of Documentation and Information on Higher Education (CEDIES).

This centralisation ensures better coordination of services and stakeholders, while improving visibility.

In 2017 the Guidance Forum (Forum orientation) was set up this is a national council in charge of establishing a national information and guidance strategy. It includes ministries, social partners, directors of secondary schools, parent and learner representatives. The guidance forum has adopted the following definition of guidance:

’Guidance refers to a series of activities that enable the citizen, at any time in his/her life:

  • to identify his/her abilities, skills and interests;
  • to make informed decisions as regards his/her studies and training choices as well as his/her professional activities.

The shared goal is to foster personal fulfilment and the development of society.’

Since 2017, every secondary school must develop its own general guidance approach. The approach has to be in accordance with the reference framework for school and professional guidance elaborated by the guidance house ([83]MENJE (2017a). Cadre de référence pour l’orientation scolaire et professionnelle [Reference framework for school and professional guidance]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/secondaire/psychologieorientation/170124-cadre-reference/index.html
). In each secondary school, a guidance unit is responsible for the implementation of the guidance process set out in the school's development plan (PDS). It is composed of at least two members of teaching staff,

two educational or psychosocial staff and at least one guidance counsellor.

The Higher Education Documentation and Information Centre (Centre de Documentation et d’Information sur l’Enseignement Supérieur) is available to people who require general information about higher education.

The web portal Anelo ([84]https://www.anelo.lu/) is an information and exchange platform for all young people preparing for training, studies or work experience. It centralises information on:

  • trades and professions ([85]http://beruffer.anelo.lu);
  • the steps to follow during a job search;
  • ePortfolio tool that allows young people to gather important documents and certificates showing their strengths and skills;
  • how to gain practical experience in the world of work (jobs for students, volunteer services);
  • where to find information on guidance and support.

The Anelo Web portal and the various connected sites are now being managed by the Guidance House Coordination Department. They are also in charge of promoting the portal and training courses to help young people use the various tools on Anelo.

The Youth guarantee ([86]http://www.jugendgarantie.lu/) was launched in June 2014. It commits national authorities (National Employment Agency, Local Action for Youth, National Youth Service) to offer young people between 16 and 25 high-quality guidance to help them find a job, make it possible to return to school or an apprenticeship, or to offer work experience in projects on a voluntary basis. Each is offered support tailored to his/her background, personal situation and aspirations. Diversification of the school offer is the main priority for education policies in Luxembourg. A recent reform provides growing autonomy to schools to boost this diversification and to support individual school efforts to innovate.

Choosing the right school is becoming more challenging for learners; the MENJE has launched a platform www.mengschoul.lu to help young people and their parents. The platform is for learners going into secondary education, as well as for those going into higher secondary education and foreign learners joining the Luxembourgish school system. The platform is based on a standardised detailed portrait of each school. An interactive map allows users to filter secondary schools according to the innovative projects on offer; other filters allow users to select the school programmes. This tool helps parents and learners to compare VET schools and their specificities to make the best choice. [87]Based on: INFPC (2019). Vocational education and training in Europe: Luxembourg. Cedefop ReferNet VET in Europe reports 2018.http://libserver.cedefop.europa.eu/vetelib/2019/Vocational_Education_Training_Europe_Luxembourg_2018_Cedefop_ReferNet.pdf

Please see:

Vocational education and training system chart

Tertiary

Click on a programme type to see more info
Programme Types

EQF 5

Higher technician

programmes (BTS),

2 years

ISCED 554

Higher technician programme (brevet de technicien supérieur, BTS) leading to EQF level 5, ISCED 554
EQF level
5
ISCED-P 2011 level

554

Usual entry grade

15-17 ([152]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

17 and later ([153]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

19-20

Usual completion age

21-22

Length of a programme (years)

2

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

N

Registration fees

Is it available for adults?

Y

ECVET or other credits

120 credits

Learning forms (e.g. dual, part-time, distance)

Information not available

Main providers

Public and private secondary schools, and technical secondary schools recognised by the State.

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

BTS programmes alternate; they provide both theoretical instruction including general education (like languages) and training in a work environment ([154]www.bts.lu).

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

To be admitted to the programme, learners require either a general or a technical secondary school leaving diploma (diplôme de fin d'études secondaires classique, diplôme de fin d’études secondaires générales), or a technician diploma (diplôme de technicien – DT) complemented by optional modules.

Assessment of learning outcomes

The BTS programme is organised in modules spread over four semesters. Each module has between 5 and 20 ECTS credits and can be composed of different courses with at least one ECTS credit.

Attendance at courses, practical training courses and any other pedagogical activities organised as part of the training is compulsory.

Each course is subject to knowledge assessment that results in a grade. The score is either the result of a continuous assessment carried out during the six-month period, or of a final examination carried out exclusively during an examination session, or by these two assessment modes combined.

 

Diplomas/certificates provided

Graduates receive the higher technician certificate (brevet de technicien supérieur, BTS;

Examples of qualifications

Nurse, paediatric nurse, responsible for exploitation of automated installations, game artist, character designer

Progression opportunities for learners after graduation

Graduation from the higher technician programme does not provide progression possibilities to any other programme.

Destination of graduates

Information not available

Awards through validation of prior learning

Validation of non-formal and informal learning (Validation des acquis de l'expérience – VAE) allows experience to be recognised with a view to obtaining all or part of a higher technician certificate (Brevet de Technicien Supérieur – BTS).

VAE is for everyone, regardless of age, level of study or professional status. The prerequisite is to have completed at least three years or 5 000 hours of paid, unpaid or voluntary work directly related to the requested certification, whether continuous or not.

In order to identify the diploma matching his/her experience, the applicant is advised to consult the list and obtain information from the schools and colleges in question. Some BTS qualifications are not yet accessible through VAE.

The validation application and registration application should be sent to the Head of the school/college in question in order to obtain the diploma. The validation application is accompanied by a portfolio which must set out, with reference to the diploma sought, the knowledge, aptitude and skills that the applicant has gained through experience.

Based on the proposal of the college director, the ministry appoints an ad hoc committee for each training programme.

This committee assesses the validation request and the portfolio and interviews the applicant. It may request a placement into a professional situation (whether real-life or simulated). While deliberating, it assesses the knowledge acquired through experience with regard to the curriculum of the desired diploma.

The ad hoc committee may take one or several of the following decisions:

  • exemption from producing one of the certificates set out by Article 10 (1) of the Law of 19 June 2009 (setting out the terms and conditions for higher education courses of study leading to a higher technician certificate (BTS));
  • registration, provided that an additional part of the curriculum is completed;
  • exemption from attending some of the training modules or classes comprising the modules;
  • exemption from compliance with some of the validation measures;
  • exemption from all of the modules, classes and examinations leading to the diploma being granted.
General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 6

Professional bachelor

programmes,

3 years

ISCED 655

Professional bachelor programmes leading to EQF level 6, ISCED 655
EQF level
6
ISCED-P 2011 level

655

Usual entry grade

16-17 ([155]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

19-20 ([156]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

19-20

Usual completion age

21-22

Length of a programme (years)

3

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

Information not available

Is it available for adults?

Y

ECVET or other credits

180 to 240 credits

Learning forms (e.g. dual, part-time, distance)

- academic teaching

- applied courses

- internship abroad and/or case studies

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

- practical training at school

- in-company practice abroad

- case studies

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Professional bachelor (bachelor professionnel) programmes are accessible to holders of a general or technical secondary leaving diploma or a technician diploma in the field of study.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Graduates receive an application-oriented bachelor degree (professional bachelor, bachelor professionnel).

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Progression to professional or academic Master programme is possible.

Destination of graduates

Information not available

Awards through validation of prior learning

At university level, validation of non-formal and informal learning allows experience to be recognised with a view to accessing various bachelor or master university studies. The request is considered by a board of examiners whose members are appointed by the chancellor, following recommendation of the dean of the relevant faculty ([157]http://www.lifelong-learning.lu/Detail/Article/Diplomes/pour-les-diplomes-universitaires----bachelor-et-master/en and
http://legilux.public.lu/eli/etat/leg/loi/2009/06/19/n1/jo
).

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 7

Professional master

programme,

2 years

ISCED 757

Professional master programme leading to EQF level 7, ISCED 757
EQF level
7
ISCED-P 2011 level

757

Usual entry grade

19-20 ([158]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

20-21 ([159]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

21

Usual completion age

23

Length of a programme (years)

2

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Information not available

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

Information not available

Is it available for adults?

Y

ECVET or other credits

60 to 120 credits

Learning forms (e.g. dual, part-time, distance)

Information not available

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

Learners need to hold a (professional) bachelor degree to enter the professional master programme.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Graduates receive an application-oriented master degree (professional master, Master professionnel).

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Graduates holding a professional master programme can progress to academic PhD programmes.

Destination of graduates

Information not available

Awards through validation of prior learning

At university level, validation of non-formal and informal learning allows experience to be recognised with a view to accessing various bachelor or master university studies. The request is considered by a board of examiners whose members are appointed by the chancellor, following recommendation of the dean of the relevant faculty ([160]http://www.lifelong-learning.lu/Detail/Article/Diplomes/pour-les-diplomes-universitaires----bachelor-et-master/en and
http://legilux.public.lu/eli/etat/leg/loi/2009/06/19/n1/jo
).

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

Post-secondary

Click on a programme type to see more info
Programme Types

EQF 5

Master craftsperson

programmes

ISCED 453

Master craftsperson programmes leading to EQF 5 and ISCED 453 – Brevet de maîtrise.
EQF level
5
ISCED-P 2011 level

453

Usual entry grade

Applicants , who must be at least 18, must hold one of the following qualifications:

  • vocational aptitude diploma (Diplôme d'aptitude professionnelle - DAP) 
  • technician's diploma (Diplôme de Technicien - DT)
  • general secondary school leaving diploma (Diplôme de fin d'études secondaires classiques - DFESC)
  • technical secondary school leaving diploma (Diplôme de fin d'études secondaires générales - DFESG)
  • Any other post-secondary qualification (higher technician's certificate (Brevet de technicien supérieur - BTS), bachelor, master)
  • A foreign diploma or certificate recognised by the Ministry of Education, Children and Youth
Usual completion grade

Not applicable

Usual entry age

18+

Usual completion age

Not applicable

Length of a programme (years)

Information not available

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Y

Is it initial VET?

N

Is it continuing VET?

Y

Is it offered free of charge?

The registration fee for preparatory courses is EUR 600 per year of registration.

The registration fee for exams is EUR 300 per exam session.

Is it available for adults?

Y

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

Courses are organised in the evenings on weekdays and weekends. They are held either at the training centre of the by the Chamber of Trades and Skilled Crafts, or in secondary schools, or in the National Centre for Continuing Vocational Training (CNFPC).

Main providers

Programmes are organised by the Chamber of Trades and Skilled Crafts

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

The courses in professional theory are specific to each trade. They consist, in principle, of three different modules.
The Chamber of Trades and Skilled Crafts proposes the module that the candidate must follow for the current year.
There is a list with the trades for which preparatory courses are offered. 
In some trades, complementary courses, compulsory and subject to fees, have to be followed.

Main target groups

Programmes are available for young people and also for adults.

Entry requirements for learners (qualification/education level, age)

To access these programmes, learners are required to have successfully completed at least EQF level 3 in any trades or occupations. Learners should also have at least one year of work experience to be able to take the final exam.

Assessment of learning outcomes

The master craftsperson programmes is organised in modules and the candidates are free to adapt their training to their own pace. When registering, they choose the modules they would like to follow during the school year.
As the maximum duration to finalise the master craftsperson programmes is six years, the Chamber of Trades and Skilled Crafts proposes course planning that allows regular progression, while preserving a margin of safety

Diplomas/certificates provided

Graduates receive the master craftsperson qualification.

Examples of qualifications

Graduates can settle in the craft industry as self-employed and to train apprentices. The qualification confers the title of master craftsperson in the particular trade.

Progression opportunities for learners after graduation

The master craftsperson qualification does not give any access right for higher education; progression opportunities depend on the certificate gained at secondary level.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([149]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273–3288. http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([150]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6. http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([151]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175. http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification.

General education subjects

Information not available

Key competences

The preparatory courses for the master craftsperson programmes are organised in the following fields:

  • business organisation and management, and applied pedagogy;
  • professional theory and practice.
Application of learning outcomes approach

information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available

Secondary

Click on a programme type to see more info
Programme Types

EQF 1

Lower secondary

technical programmes (pre-VET)(ESG),

3 years

ISCED 244

The lower cycle of technical secondary education (ISCED 244, EQF 1) is considered as pre-VET and lasts three years. It comprises the ’orientation programme’ and the ’preparatory programme’, designed for learners who struggle with the regular secondary education curriculum.
EQF level
1
ISCED-P 2011 level

244

Usual entry grade

9 ([90]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

11 ([91]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

12

Usual completion age

14

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults may attend the last year of the lower secondary education programme and then access the technical and technician programme as well as a vocational programme.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

Orientation programmes’ (Les classes inférieures de la voie d’orientation)

In the ‘orientation programme’ classes (three years: 7G, 6G and 5G) of general education (languages, mathematics, human and social sciences, natural sciences) the learners’ knowledge is deepened. The language of instruction is German, except for mathematics and the French language course, which are taught in French. During the second year, language courses (French and German) as well as mathematics are taught on two levels: in a basic course or in an advanced class. The choice of enrolment in one of the two courses is made according to the level of competence of the learner and the orientation advice from the class council. In the last year (5G), English is also taught on two levels. The orientation programme includes workshops in secondary schools that allow the learner to discover several trades and occupations. This is complemented by placements and visits in companies.

The preparatory programme (Les classes inférieures de la voie de preparation) :

The lower grades of the preparatory programme (three years: 7P, 6P and 5P) are for learners who, in one or more disciplines, have not reached the core competence referred to at the end of cycle 4 of primary education. They prepare learners for later transition to the orientation programme or vocational training. German, French, mathematics, general culture, physical education and sports and practical learning in workshops are taught in modules spread over three years of teaching. These allow the learner to progress at his own pace and capitalise on a maximum of modules for the subsequent training envisaged.

These two lower secondary programmes are distinguished by their general orientation, the relative importance of the subjects taught and the teaching methods.

Candidates have the choice between daytime and evening courses.

Main providers

Secondary schools and national school for adults.

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Programmes include workshops that allow learners to discover several trades and occupations. This is complemented by placements and visits in companies.

Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up in mid-2018 ([92]SCL (2018b). Loi du 18 juin 2018 portant: (1) Institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs, and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Young people must have successfully finished primary education.

Candidates should be 17 or more and have a school level allowing access to the last year of lower secondary education.

 

Assessment of learning outcomes

The different functions of assessment are given in detail:

  • formative evaluation: helping the learner to become aware of their strengths and weaknesses while documenting their learning process;
  • certification of the learner's individual knowledge and competences at the end of a learning period;
  • serve as a basis for the learner's guidance.

With a view to these objectives, the quarterly school reports (bulletins trimestriels) are complemented by a report supplement (complément au bulletin).

The quarterly report includes for each taught subject the average (out of 60) of classwork notes and other tests or assignments. The supplement to the report gives information on the progress of the learner in the different areas of competence of the taught subjects, giving an unencrypted assessment. This assessment by skills area offers a differentiated and nuanced view of the learners’ abilities.

At the end of each quarter (or semester), the parents (or the adult learner) receive a report (bulletin) detailing:

  • quarterly (or each semester) marks of the subjects taught;
  • the general quarterly (or each semester) mark;
  • remedial measures for unsatisfactory results.

The report at the end of the school year also includes further details:

  • each subject's annual mark;
  • the general annual mark:
  • promotion decision (positive or not) towards the higher class (at the third year of the lower cycle of technical secondary education).
Diplomas/certificates provided

Not applicable

Examples of qualifications

Not applicable

Progression opportunities for learners after graduation

After successful completion of the lower cycle, learners can choose between technical, vocational and technician programmes.

Destination of graduates

Information not available

Awards through validation of prior learning

N

General education subjects

Y

Languages, humanities and social sciences, mathematics and natural sciences

Key competences

Mathematics, languages

Application of learning outcomes approach

Y

Teaching by competences is applied in the lower classes of technical secondary.

Competences refer to the ability of a learner to implement an organised set of knowledge, skills, and attitudes to provide an adequate response to a problem.

Competences sets describe the knowledge and competences that learners must master in a sustainable way at the end of the two last years of lower cycle of technical secondary education.

For language and mathematics, these sets are divided into two levels: basic set and advanced set.

The set of competences differ from the teaching programme, which describe the contents treated in each domain (maths, French, history…).

Share of learners in this programme type compared with the total number of VET learners

Lower technical secondary education in 2016/17 represented 46.9% ([93]2016/17.) of total learners in technical education (lower, medium and upper level) ([94]MENJE (2018a). Les chiffres clés de l’Éducation nationale : statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in lower technical secondary education has remained stable since 2011/12; at that time 12 915 learners attended lower technical secondary education and 12 760 in 2016/17.

EQF 1

Integration classes

ISCED 244

Integration classes (classe d'insertion) of the lower cycle of technical secondary education, EQF1, ISCED 244
EQF level
1
ISCED-P 2011 level

244

Usual entry grade

9 ([95]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

11 ([96]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

12

Usual completion age

14

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults may attend the last year of the lower secondary education programme and then access the technical and technician programme as well as a vocational programme.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

Information not available

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

Programmes are available for young people and also for adults. For the latter, the completion corresponds to a completion of lower technical secondary education.

Integration classes (classe d'insertion) of the lower cycle of technical secondary education have been created for learners who have a good academic record in their country of origin, but do not have a sufficient command of the languages used for tuition. Based on language skills gaps, learners receive intensive support in learning French or German.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([97]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Information not available

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

Information not available

Examples of qualifications

Not applicable

Progression opportunities for learners after graduation

Those who complete the integration classes can continue their studies in one of the following programmes: - vocational programme (CCP), ISCED 354, EQF 4;

- vocational programme (DAP) ISCED 354, EQF 4;

- technician programme (DT) ISCED 354, EQF 4;

- technical programme ISCED 354, EQF 4.

Destination of graduates

Information not available

Awards through validation of prior learning

Information not available

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Teaching by competences is applied in the lower classes of technical secondary.

Competences refer to the ability of a learner to implement an organised set of knowledge, skills, and attitudes to provide an adequate response to a problem.

Competences sets describe the knowledge and competences that learners must master in a sustainable way at the end of the last two years of lower technical secondary education.

For language and mathematics, these sets are divided into two levels: basic set and advanced set.

The set of competences differ from the teaching programme, which describe the contents treated in each domain (maths, French, history…).

Share of learners in this programme type compared with the total number of VET learners

Information not available

EQF 4

Technical

school-based programmes (ESG),

4 or 5 years,

WBL % varies

ISCED 354

Technical school-based programmes (Diplôme d’enseignement secondaire général) leading to EQF level 4, ISCED 354
EQF level
4
ISCED-P 2011 level

354

Usual entry grade

12 ([98]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

15 ([99]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

18 or 19

Length of a programme (years)

4-5

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

N

This programme is not considered as IVET at national level.

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

The curriculum includes general and technical education; the latter includes practical and theoretical classes. The share of the technical part depends on the grade and on the chosen field and varies from approximately 25 to 65%.

Main providers

Secondary schools

Share of work-based learning provided by schools and companies

Share of work-based learning ([100]Nationally referred to as technical learning.) depends on the grade and on the chosen field and varies from approximately 25 to 65%.

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school
  • in-company practice for some programmes
Main target groups

Programmes are available for young people and some of them also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([101]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires: (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the ‘main-stream’ school system.

Entry requirements for learners (qualification/education level, age)

Information not available

Assessment of learning outcomes

Learner assessment is mainly based on summative evaluations, i.e. periodical tests on contents which have been taught recently. Depending on the subjects, one, two or three tests per term may be organised.

The quarterly report includes for each taught subject the average (out of 60) of classwork notes and other tests or assignments.

At the end of each quarter (or semester), the parents (or the adult learner) receive a report (bulletin) mentioning among others:

  • quarterly (or each semester) marks of the subjects taught;
  • general quarterly (or each semester) mark;
  • remedial measures in case of unsatisfactory results.

The report at the end of the school year also includes further details:

  • each subject's annual mark;
  • general annual mark;
  • promotion decision (positive or not) towards the higher class.
Diplomas/certificates provided

Learners who succeed in technical programmes are awarded a technical secondary school leaving diploma (diplôme de fin d’études secondaires générales). This diploma confers the same rights as that from general secondary education; depending on the strand and section, graduates can enter the labour market or pursue higher education.

Examples of qualifications

Work in the administrative field in private companies or public institutions.

Progression opportunities for learners after graduation

Depending on the strands followed (referred to nationally as ‘divisions’), graduates have the following progression opportunities:

a) administrative and commercial: graduates can pursue higher education in economics, law and accounting. They may work in administration in private companies or public institutions);

b) healthcare and social professions: graduates can pursue higher education in these professions. Graduates in nursing education can continue their education as midwife or medical technical assistant in radiology. Graduates in educator training can continue their studies as a state-certified educator for a period of one year;

c) general technical: graduates can pursue higher education in their specialties: engineering, natural science, architecture, design and sustainable development, computer science, environmental sciences);

d) division of arts: graduates can pursue higher education in the same domain;

e) division of tourism and hospitality: graduates can pursue higher education while preparing for the profession of manager in hospitality.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([102]SC (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([103]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([104]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for technical school-based programmes, all VET diplomas and certificates as well as for master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification. At higher technician certificate level, an ad hoc evaluation committee is set up for each individual asking for recognition of prior learning ([105]SCL (2016b). Loi du 23 juillet 2016 modifiant la loi modifiée du 19 juin 2009 portant organisation de l’enseignement supérieur, fixant les modalités du cycle d’études d’enseignement supérieur aboutissant à la délivrance du brevet de technicien supérieur. Mémorial A 143.
http://www.legilux.public.lu/leg/a/archives/2016/0143/a143.pdf#page=2
).

General education subjects

Y

The curriculum includes general and vocational (nationally referred to as technical) education; the latter includes practical and theoretical classes. The share of the technical part depends on the grade and on the chosen field and varies from approximately 25 to 65%.

Key competences

Information not available

Application of learning outcomes approach

information not available

Share of learners in this programme type compared with the total number of VET learners

Technical programmes (medium and upper level) represents 48.7% ([106]2016/17.) of all medium and upper secondary technical education ([107]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in technical secondary education (medium and upper levels) has increased since 2011/12. At that time 5 677 learners attended technical secondary education programme, with the number increasing to 7 043 in 2016/17.

EQF 4

Technician programmes (DT),

4 years,

WBL % varies

ISCED 354

Technician programmes (le diplôme de technicien), leading to EQF level 4, ISCED 354
EQF level
4
ISCED-P 2011 level

354

Usual entry grade

12 ([108]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

15 ([109]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

18

Length of a programme (years)

4

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

  
ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

This technician programme is mainly offered as a full-time track (filière de plein exercice), where all training occurs in an education institution and includes a minimum job placement of 12 weeks. The offer of programmes in the concomitant track (learning in school and in an enterprise takes place in parallel throughout the year - filière concomitante) or mixed track (theoretical and practical training in school in the first years and last year with the concomitant track - filière mixte) has been extended since 2015/16.

Main providers
  • Secondary schools
  • Companies/training centres
Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

• practical training at school

• in-company practice

Main target groups

Programmes are available for young people and some of them also for adults.

The mediator for school maintenance, inclusion and integration was set up in mid-2018 ([110]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Orientation towards vocational programmes takes place at the end of third year of lower technical education upon decision of the class council based on the assessment reports of the whole academic year.

Assessment of learning outcomes

Since the entry into force of the 2008 reform, the technician (and also vocational) programmes have been organised into modules. For each module, an assessment framework has been set up. It distinguishes compulsory and optional skills and specifies indicators and minimum standards. At the end of the module, learners take an exam to assess the acquisition of required skills for the module and receive an assessment report (bulletin), which indicates whether the module has been passed (unsuccessful, successful, very successful).

Technician and vocational programmes also foresee integrated projects in the middle (only for vocational programmes leading to the vocational aptitude diploma and the technician programme) and at the end ([111]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
). These integrated projects aim to monitor whether the learner has developed the complex skills needed to solve a real or simulated work situation. An integrated project can be spread over a maximum duration of three days (24 hours) for programmes leading to vocational aptitude diploma and technician programmes. This project allows learners to demonstrate the acquisition of required skills in a professional situation. The intermediary and the final integrated projects are a compulsory module for these programmes.

An interim assessment sheet is drawn up at the end of

1. the second academic year of normal four-year training;

2. the first academic year of normal training of three years.

The assessment is based on the learner's results in the compulsory modules as planned in the curriculum from the start. Neither the placement in companies nor the intermediate project is taken into account.

A final assessment is made at the end of the programmes taking into account compulsory modules followed since the interim assessment. Neither the final integrated project nor the intermediate project is taken into account.

Assessments are successful if the following conditions are met:

For a DT (other training durations):

  • 85% success in compulsory modules ([112]Compulsory modules comprise fundamental and complementary modules.);
  • 85% success in compulsory vocational modules;
  • success of all fundamental modules.

For a DT (other training duration of training: one year). For other training periods:

  • 90% success in the compulsory modules of the last two years of training;
  • 90% success of compulsory vocational modules;
  • success of all fundamental modules.
Diplomas/certificates provided

The technician diploma certifies that the holder is competent to perform the trade/profession in question. It differs from the programme leading to the vocational aptitude diploma (DAP) ([113]Diplôme d’aptitude professionnelle (DAP).) by in-depth and diversified competences as well as in-depth general education.

Examples of qualifications

Information not available

Progression opportunities for learners after graduation

Technician programme graduates may progress to the third year of the general upper secondary programme or follow a one-year optional preparatory module allowing them to enter tertiary education.

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([114]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A, 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([115]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([116]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification.

General education subjects

Y

In comparison to the vocational DAP programme, the technician programme offers more in-depth general education

Key competences

Information not available

Application of learning outcomes approach

Y

The major VET reform of 2008 ([117]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) was implemented between 2010/11 and 2013/14. Among the key principles of the reform is also that teaching by subject is replaced with teaching by units and modules. Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Share of learners in this programme type compared with the total number of VET learners

In 2016/17 the number of learners following technician programmes (medium and upper level) was 24.2% ([118]2016/17) of all learners following medium and upper secondary technical education ([119]MENJE (2018a). Les chiffres clés de l’Éducation nationale : statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).The total number of learners in technician programmes (medium and upper level) has slightly increased since 2011/12. At that time 3 378 learners attended technical secondary education programmes, with the number increasing to 3 504 in 2016/17.

EQF 3

Vocational programmes (DAP),

3 years,

WBL % varies

ISCED 353

Vocational programmes leading to a vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) leading to EQF level 3, ISCED 353.
EQF level
3
ISCED-P 2011 level

353

Usual entry grade

12 ([120]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

14 ([121]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

17

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y

School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults (those 18 years old and above), having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to the vocational aptitude diploma DAP ([122]Vocational capacity certificate (certificat de capacité professionnelle, CCP).). This is available both to job holders and seekers registered at the public employment service. Upon proof of certain work experience, a dedicated committee may guide the adult learner to a suitable grade. The committee includes representatives of the education ministry, Vocational Training Service, labour ministry, guidance service of the employment service, Chamber of Commerce, Chamber of Trades and Skilled Crafts, Chamber of Agriculture, and Chamber of Employees.

Theory training takes place in a technical secondary school or at the national continuing vocational training centre. The practical part is apprenticeship in an enterprise. Adult apprentices receive allowances equal to the minimum wage for unskilled workers (EUR 1 922.96, 1 January 2016) as defined in a 2010 regulation ([123]SCL (2010c). Règlement grand-ducal du 17 décembre 2010 portant organisation de l’apprentissage pour adultes. Mémorial A 245, 4075-4085.
http://www.legilux.public.lu/leg/a/archives/2010/0240/a240.pdf#page=4
).

The 2008 reform introduced a modular system for apprenticeship, which guarantees the validity of any module acquired during initial training for a certain period, aiding access to lifelong learning.

Vocational programmes for adults: evening classes

Within vocational programmes, employed adults can attend the first year a vocational aptitude diploma (DAP) as administrative and commercial agent. The theoretical part is provided through evening classes in a technical secondary school or in the national continuing vocational training centre. The practical part is acquired through full-time employment in a company. After the first year DAP evening class, adults can continue the second and third year DAP classes under an adult apprenticeship contract.

Vocational programmes for adults: on-the-job training

The nursing assistant vocational aptitude diploma can be obtained through on-the-job training. This training is suitable for those with some work experience in the care sector, who have not had the opportunity to undertake IVET. The three-year training course leads to a nursing assistant DAP. Applicants must fulfil admission criteria such as professional experience of minimum 2 500 hours in the care sector, an employment contract (minimum 50% part-time) and the agreement of their employer.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)
  • school-based learning;
  • work practice (practical training at school and in-company practice);
  • apprenticeships.

DAP Vocational programmes can be followed in one of three different tracks:

a) the concomitant track (filière concomitante), where learning in school and in an enterprise takes place in parallel throughout the apprenticeship. Depending on the profession, the two parts can be organised as day-release (such as two days per week in school and three days in an enterprise) or block-release (for example, nine weeks at school and nine weeks in enterprise); the allocated time may also vary depending on the profession;

b) the mixed track (filière mixte) which is suitable for some professions. This programme offers theoretical and practical training in school in the first year. After successful completion of the school-based part, training is continued in line with the concomitant track;

c) the full-time track (filière de plein exercice), where all training occurs in an educational institution, with 12 weeks of practical training or more within an apprenticeship or internship contract.

The shares of general education, VET theory and practice in vocational programme curricula vary by trade. Vocational learning ratios (practical training in companies and in vocational training school) for each trade/profession are defined by the education ministry on the advice of professional chambers.

Main providers

Technical secondary schools

Share of work-based learning provided by schools and companies

Varies

Work-based learning type (workshops at schools, in-company training / apprenticeships)

• practical training at school

• in-company practice

Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([124]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaire; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Guidance towards vocational programmes takes place at the end of the last year of lower technical education upon decision of the class council based on the assessment reports of the whole academic year.

Except for admission criteria, there are no differences between apprenticeships for adults and young people. Those aged 18 and above, having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to DAP.

Assessment of learning outcomes

Since the entry into force of the 2008 reform, the technician (also vocational and technical) programmes have been organised into modules. For each module, an assessment framework has been set up. It distinguishes compulsory and optional skills and specifies indicators and minimum standards. At the end of the module, learners take an exam to assess the acquisition of required skills for the module and receive an assessment report (bulletin), which indicates whether the module has been passed (unsuccessful, successful, very successful).

Vocational and technician programmes also foresee integrated projects in the middle (only for vocational programme leading to the vocational aptitude diploma and the technician programme) and at the end ([125]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
). These integrated projects aim to monitor whether the learner has developed the complex skills needed to solve a real or simulated work situation. An integrated project can be spread over a maximum duration of three days (24 hours) for programmes leading to vocational aptitude diploma and technician programmes. This project allows learners to demonstrate the acquisition of required skills in a professional situation. The intermediary and the final integrated projects are a compulsory module for these programmes.

An interim assessment sheet is drawn up at the end of

1. the second academic year of normal four-year training;

2. the first academic year of normal training of three years.

The assessment is based on the learner's results in the compulsory modules as planned in the curriculum from the start. Neither the placement in companies nor the intermediate project is taken into account.

A final assessment is made at the end of the programmes taking into account compulsory modules followed since the interim assessment. Neither the final integrated project nor the intermediate project is taken into account.

Assessments are successful if the following conditions are met:

For a DAP (other training durations):

  • 85% success in compulsory modules ([126]Compulsory modules comprise fundamental and complementary modules.);
  • 85% success in compulsory vocational modules;
  • success in all fundamental modules.

For DAP (other training duration of training: one year). For other training periods:

  • 90% success in the compulsory modules of the last two years of training;
  • 90% success in compulsory vocational modules;
  • success in all fundamental modules.
Diplomas/certificates provided

Graduates receive the vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP). This diploma certifies that the holder has the skills to perform the trade/profession in question as a skilled worker on the labour market. DAP graduates may also progress to the third year of a technician programme in the same field of study, the third year of the technical programme, or enter a master craftsperson programme. Subject to completing supplementary preparatory modules they can also pursue higher technical studies (études techniques supérieures, ISCED 550 or 650).

Examples of qualifications

Hairdresser, assistant nurse, administrative and commercial agent, butcher, bricklayer, architectural drafter, aircraft mechanic.

Progression opportunities for learners after graduation

DAP graduates may progress to the third year of a technician programme in the same field of study, the third year of the technical programme, or enter a master craftsperson programme. Subject to completing supplementary preparatory modules they can also pursue higher technical studies (études techniques supérieures, ISCED 550 or 650).

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([127]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([128]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([129]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification.

General education subjects

Y

The general education for the DAP programme includes a module on citizenship education as well as French or German. In comparison to the curricular of the CCP programme, credit units and modules are more detailed and extensive.

Key competences

Y

The general education for the DAP programme includes a module on citizenship education as well as French or German.

Application of learning outcomes approach

Y

The major VET reform of 2008 ([130]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) was implemented between 2010/11 and 2013/14. Among the key principles of the reform is that teaching by subject is replaced with teaching by units and modules. Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Share of learners in this programme type compared with the total number of VET learners

Vocational programmes (medium and upper level) DAP and CCP are 27.1% ([131]2016/17.) of medium and upper secondary technical education ([132]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in vocational programmes (medium and upper level) has decreased since 2011/12. At that time 4 360 learners attended technical secondary education programme, with the number decreasing to 3 914 in 2016/17.

EQF 2

Vocational programmes (CCP),

3 years,

WBL % varies

ISCED 353

Vocational programmes leading to a vocational capacity certificate (certificat de capacité professionnelle, CCP) leading to EQF level 2, ISCED 353
EQF level
2
ISCED-P 2011 level

353

Usual entry grade

12 ([133]Counting of grades starts from age 4 when children enter pre-school, which is the first grade.)

Usual completion grade

14 ([134]Counting of grades starts from age 4 when children enter pre-school, which is the first grade.)

Usual entry age

15

Usual completion age

17

Length of a programme (years)

3

  
Is it part of compulsory education and training?

Y School attendance is compulsory between 4 and 16 years.

Is it part of formal education and training system?

Y

Is it initial VET?

Y

Is it continuing VET?

N

Is it offered free of charge?

Y

Is it available for adults?

Y

Adults (18 years old and above) having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to CCP. This is available both to job holders and seekers registered at the public employment service. Upon proof of certain work experience, a dedicated committee may guide the adult learner to a suitable grade. The committee includes representatives of the education ministry, Vocational Training Service, labour ministry, guidance service of the employment service, Chamber of Commerce, Chamber of Trades and Skilled Crafts, Chamber of Agriculture, and Chamber of Employees.

Theory training takes place in a technical secondary school or at the national continuing vocational training centre. The practical part is apprenticeship in an enterprise. Adult apprentices receive allowances equal to the minimum wage for unskilled workers (EUR 1 922.96, 1 January 2016) as defined in a 2010 regulation ([135]SCL (2010c). Règlement grand-ducal du 17 décembre 2010 portant organisation de l’apprentissage pour adultes. Mémorial A 245, 4075-4085.
http://www.legilux.public.lu/leg/a/archives/2010/0240/a240.pdf#page=4
).

The 2008 reform introduced a modular system for apprenticeship, which guarantees the validity of any module acquired during initial training for a certain period, aiding access to lifelong learning.

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)
  • school-based learning;
  • work practice (practical training at school and in-company practice);
  • apprenticeships.

Vocational CCP programmes can be followed in the concomitant track (filière concomitante), where learning in school and in an enterprise takes place in parallel throughout the apprenticeship. Depending on the profession, the two parts can be organised as day-release (such as two days per week in school and three days in an enterprise) or block-release scheme (for example, nine weeks at school and nine weeks in an enterprise); the allocated time may also vary depending on the profession;

The shares of general education, VET theory and practice in vocational programme curricula vary by trade. Vocational learning ratios (practical training in companies and in vocational training school) for each trade/profession are defined by the education ministry on the advice of professional chambers.

Main providers
  • Technical secondary schools
  • Companies
Share of work-based learning provided by schools and companies

Varies

Work-based learning type (workshops at schools, in-company training / apprenticeships)
  • practical training at school
  • in-company practice
Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([136]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Guidance towards vocational programmes takes place at the end of the third year of lower technical education upon decision of the Class Council based on the assessment reports of the whole academic year.

Except for admission criteria, there are no differences between apprenticeships for adults and young people. Those 18 years old and above, having left school more than one year before and willing to learn a trade or to change their career, can follow an ‘adult apprenticeship’ leading to CCP.

Assessment of learning outcomes

Since the entry into force of the 2008 reform, the technician (also vocational and technical) programmes have been organised into modules. For each module, an assessment framework has been set up. It distinguishes compulsory and optional skills and specifies indicators and minimum standards. At the end of the module, learners take an exam to assess the acquisition of required skills for the module and receive an assessment report (bulletin), which indicates whether the module has been passed (unsuccessful, successful, very successful).

CCP also foresee integrated projects at the end of the programme ([137]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
). These integrated projects aim to monitor whether the learner has developed the complex skills needed to solve a real or simulated work situation. An integrated project can be spread over a maximum duration of three days (24 hours) for programmes leading to vocational aptitude diploma and technician programmes. For programmes leading to a vocational capacity certificate, the integrated project is spread over a maximum duration of two days. This project allows learners to demonstrate the acquisition of required skills in a professional situation. The intermediary and the final integrated projects are a compulsory module for these programmes.

An interim assessment sheet is drawn up at the end of

  1. the second academic year of normal four-year training;
  2. the first academic year of normal training of three years.

The assessment is based on the learner's results in the compulsory modules as planned in the curriculum from the start. Neither the placement in companies nor the intermediate project is taken into account.

A final assessment is made at the end of the programmes taking into account compulsory modules followed since the interim assessment. Neither the final integrated project nor the intermediate project is taken into account.

Assessments are successful if the following conditions are met, for the CCP: 80% success in compulsory modules.

Diplomas/certificates provided

This apprenticeship programme prepares learners for the labour market and leads to the vocational capacity certificate (certificat de capacité professionnelle, CCP). This certificate attests that the holder has the social and basic practical skills for a trade/profession as a semi-skilled worker. After two years of working experience in this trade/profession, the holder is considered a skilled worker.

Examples of qualifications

Automotive mechanic assistant, florist assistant, gardener assistant, plasterer, sales assistant, hairdresser (at a lower level than if acquired over the DAP programme).

Progression opportunities for learners after graduation

This programme prepares learners for the labour market and leads to the vocational capacity certificate (certificat de capacité professionnelle, CCP). It is designed for learners with learning difficulties who cannot access studies leading to a vocational aptitude diploma (diplôme d’aptitude professionnelle, DAP) or a technician diploma (diplôme de technician, DT). This certificate attests that the holder has the social and basic practical skills for a trade/profession as a semi-skilled worker. After two years of working experience in this trade/profession, the holder is considered a skilled worker. Learners graduating from CCP can progress to the second year of the DAP programme in the same field. By decision of the class council, the learner can even be admitted to the last year of the DAP programme in the same field ([138]SCL (2016e). Règlement grand-ducal du 31 août 2016 portant sur l’évaluation et la promotion des élèves de la formation professionnelle. Mémorial A 187.
http://legilux.public.lu/eli/etat/leg/rgd/2016/08/31/n1/jo
).

Destination of graduates

Information not available

Awards through validation of prior learning

Y

The 2008 legislation ([139]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) reforming VET stipulates that everyone has the right to have his/her prior learning and occupational experience validated to obtain a professional qualification. Validation of prior learning (validation des acquis de l’expérience) is a procedure that recognises the value of learning at school (incomplete qualifications), non-formal and informal learning, and work experience. Individuals who have at least three years (5 000 hours) of paid, unpaid or voluntary work (whether continuous or not) directly related to the requested qualification may request certification from the education ministry ([140]SCL (2010b). Règlement grand-ducal du 11 janvier 2010 portant organisation de la validation des acquis de l’expérience pour la délivrance des brevets, diplômes et certificats prévue au chapitre V de la loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 6.
http://legilux.public.lu/eli/etat/leg/rgd/2010/01/11/n1/jo
). A recent law ([141]SCL (2016c). Loi du 24 août 2016 modifiant la loi modifiée du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 175.
http://legilux.public.lu/eli/etat/leg/loi/2016/08/24/n1/jo
) modifying the 2008 legislation, specifies that during the validation of prior learning the education ministry will offer support to candidates through either collective workshop or personalised interviews with a coach nominated by the Minister. Validation is possible for all VET diplomas and certificates as well as for the master craftsmanship. If all conditions are met, the process leads to a certificate or diploma or to a part thereof. Experience must be directly related to the requested certification. At higher technician certificate level, an ad hoc evaluation committee is set up for each individual asking for recognition of prior learning ([142]SCL (2016b). Loi du 23 juillet 2016 modifiant la loi modifiée du 19 juin 2009 portant organisation de l’enseignement supérieur, fixant les modalités du cycle d’études d’enseignement supérieur aboutissant à la délivrance du brevet de technicien supérieur. Mémorial A 143.
http://www.legilux.public.lu/leg/a/archives/2016/0143/a143.pdf#page=2
).

General education subjects

Y

Key competences

Y

The general education part includes a module on citizenship education.

Application of learning outcomes approach

Y

The major VET reform of 2008 ([143]SCL (2008a). Loi du 19 décembre 2008 portant réforme de la formation professionnelle. Mémorial A 220, 3273-3288.
http://www.legilux.public.lu/leg/a/archives/2008/0220/a220.pdf#page=2
) was implemented between 2010/11 and 2013/14. Among the key principles of the reform is that teaching by subject is replaced with teaching by units and modules. Each module focuses on concrete professional situations; the learning outcomes to be acquired (competences and knowledge) are defined for each module.

Share of learners in this programme type compared with the total number of VET learners

Learners following one of the vocational programmes DAP and CCP (medium and upper level) are 27.1% ([144]2016/17.) of all medium and upper secondary technical education learners ([145]MENJE (2018a). Les chiffres clés de l’Éducation nationale: statistiques et indicateurs 2016-2017 [Key figures of national education: statistics and indicators 2016-17]. Luxembourg: MENJE.
http://www.men.public.lu/fr/actualites/publications/themes-transversaux/statistiques-analyses/chiffres-cles/2016-2017/index.html
).

The total number of learners in vocational programmes (medium and upper level) has decreased since 2011/12. At that time 4 360 learners attended technical secondary education programme, with the number decreasing to 3 914 in 2016/17.

VET available to adults (formal and non-formal)

Click on a programme type to see more info
Programme Types

Optional preparatory module

Optional preparatory module - Modules préparatoires aux études techniques supérieures
EQF level
Not applicable
ISCED-P 2011 level

Not applicable

Usual entry grade

14 or 15 ([146]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual completion grade

15 or 16 ([147]Counting of grades starts from age four when children enter pre-school, which is the first grade.)

Usual entry age

18 or 19

Usual completion age

Not applicable

Length of a programme (years)

Not applicable

  
Is it part of compulsory education and training?

N

Is it part of formal education and training system?

Information not available

Is it initial VET?

Information not available

Is it continuing VET?

Information not available

Is it offered free of charge?

Y

Is it available for adults?

Y

ECVET or other credits

Information not available

Learning forms (e.g. dual, part-time, distance)

- school-based learning (English, German, French and Maths)

Main providers

Information not available

Share of work-based learning provided by schools and companies

Information not available

Work-based learning type (workshops at schools, in-company training / apprenticeships)

Information not available

Main target groups

Programmes are available for young people and also for adults.

The mediator for school maintenance, inclusion and integration was set up mid-2018 ([148]SCL (2018b). Loi du 18 juin 2018 portant: (1) institution d’un service de médiation au maintien, à l’inclusion et à l’intégration scolaires; (2) modification de la loi modifiée du 6 février 2009 relative à l’obligation scolaire. Mémorial A 548.
http://legilux.public.lu/eli/etat/leg/loi/2018/06/18/a548/jo
). The mediator's role is to deal with complaints about learners at risk of dropping out of school, the inclusion of learners with special educational needs and the integration of children from immigrant backgrounds into the mainstream school system.

Entry requirements for learners (qualification/education level, age)

Learners must have graduated from a technician programme or hold a vocational aptitude diploma (DAP) to enter these optional preparatory modules.

Assessment of learning outcomes

Information not available

Diplomas/certificates provided

In order to certify access to higher technical studies in the corresponding specialty, learners must have passed all the preparatory modules in a language (German, French or English) and all the preparatory modules in mathematics as described in the timetable of the curricula concerned.

Examples of qualifications

Not applicable

Progression opportunities for learners after graduation

Successful completion of the optional preparatory modules provides the graduates access to tertiary programmes.

Destination of graduates

Information not available

Awards through validation of prior learning

Information not available

General education subjects

Information not available

Key competences

Information not available

Application of learning outcomes approach

Information not available

Share of learners in this programme type compared with the total number of VET learners

Information not available.