Following approval of the 8 January 2018 decree, Italy adopted a national qualifications framework, a tool to define and classify the qualifications issued within the national system of certification of competences, which will make it possible to create the national repertory of education and training qualifications and professional qualifications hereinafter the national repertory).
Thanks to the national qualifications framework, the institutional and technical process for cross-referencing qualifications issued within the national system to one of the eight levels of the European qualifications framework for lifelong learning is defined. In fact, the scope, descriptors and levels of the national qualifications framework are developed in coherence and continuity with European qualifications framework levels. The national qualifications framework and the atlas for jobs and qualifications (hereinafter the job atlas) ([27]The atlas for jobs and qualifications is a classification and information tool created on the basis of the descriptors of the Classification of economic and professional sectors, also pursuant to Art. 8 of Legislative Decree 13/2013 and Art. 3, para. 5 of the Inter-Ministerial Decree of 30 June 2015 and an integral part of the information systems pursuant to Arts. 13 and 15 of Legislative Decree 150/2015.) are the two components of the technical infrastructure of the national repertory.
The competences that compose the national repertory are defined and updated by the education ministry, the labour ministry, other ministries and regions and autonomous provinces that now have the possibility to use the descriptors of the job atlas (processes, activities and expected outcomes) as guideline criteria. These have been developed on a national level in collaboration with the regional authorities and are periodically updated, pursuant to the decree dated 30 June 2015.
As far as the technical investigation part is concerned, this is done via a process conducted by the National institute for public policy analysis further to a request by and in collaboration with stakeholders who are sector experts and subsequently validated by the national technical group established pursuant to the 30 June 2015 decree.
The technical-institutional decision to create a national benchmark – i.e. of a reference tool, organised along the lines of job descriptors, has made it possible to construct a shared system of technical elements around which to establish the processes for assessing the relevance of the needs of the labour market to the competences already described in the national repertory and development of the same, if necessary. The qualifications in the national repertory correspond to a series of elements that constitute the minimum national standard. They are: reference to the public awarding body; description of competences in terms of skills, know-how, autonomy and responsibility; referencing to the economic activity statistical codes (ATECO) and the nomenclature and classification of occupations (CP-ISTAT), in compliance with national statistical system laws; referencing to the national qualifications framework/European qualifications framework.
These elements are compulsory for all qualifications for the purpose of validation and certification within the national system of certification of competences, as well as for the purposes of portability in a European context. Precisely in relation to this last point, the descriptors of the job atlas are referenced to National qualifications framework levels and are the only benchmarks for the process of comparison between the qualifications issued by the different public awarding bodies.
The national system of certification of competences is designed to be integrated with and complementary to the public lifelong learning offer, in order to favour development of the cultural and professional skills acquired by individuals in formal and non-formal learning contexts and the portability of qualifications in both national and European contexts, even in terms of geographical and professional mobility. The entire technical institutional system that has been developed since 2013 is the single benchmark for organisation of assessment tests, basically designed to ascertain the possession of competences, in line with Article 3, para. 1 of Legislative Decree 13 dated 16 January 2013.
Both components of the national repertory (namely the national qualifications framework and the job atlas) are anchored to the definition of competence intended as the proven ability to use – in a work, study or professional and personal development situations – a complex set of skills and know-how acquired in formal, non-formal and informal learning contexts.
The job atlas contains descriptions of one or more expected outcomes for each of the 840 areas of activity which make up the classification of economic and professional sectors. These express the outcome of an activity or a set of activities of a specific area of activity and include indications on the expected product/service, on the service to be provided, on any input elements and on the context and complexities expressed in terms of autonomy and responsibility.
In the same way, the national qualifications framework provides the reference parameter to define and/or evaluate the elements useful for expressing the minimum expected outcomes, in relation to a specific qualification, in terms of what individuals should know and be capable of doing in relation to each of the eight levels that characterise the increasing complexity of learning for each of the descriptors of the competence (know-how, skills, autonomy and responsibility).
As explained above the Italian context is characterised by the presence of multiple institutional players at national and regional levels.
National vocational school programmes that combine general education and VET ([28]Istituti professionali.) fall under the competence of education ministry that lays down general rules and common principle. In the context of school autonomy, schools have the possibility to include specific subjects.
Education and vocational training qualifications, which fall within the competence of the regions, are included in the national register of qualifications. These qualifications are the outcome of a technical and institutional process, which took place at the permanent conference for relations between the State, the regions and the autonomous provinces (a privileged forum for political negotiations between the central government and the regions), with the signing of a State-regions agreement. Any modification to the register requires a debate in the above-mentioned forum.
Below specific information for VET programmes is presented:
Initial VET programmes (IeFP).
The Title V of the current Constitution provides that vocational and training pathways (IeFP) fall under the exclusive competence of the Regions. This means that the State sets ‘common standards’ (Essential levels of performance, LEP, defined by Legislative Decree 226/05) and regions define, by their own legislation, the system of vocational and training pathways taking into account the characteristics and needs of the territory. Regions design the training provision. In 2011 regulations issued by the State-regions conference have introduced several important systemic elements: a set of training standards for basic skills to be developed in the three - and four-year programmes; a set of minimum standards (valid at national level) for technical and vocational skills in relation to the occupational profiles included in the National qualifications register ([29]Repertorio nazionale delle qualifiche.) intermediate and final certifications that are valid at national level.
The national qualifications register created in 2011 contains the national occupational profiles and the corresponding qualifications and programmes or learning pathways, as well as minimum education and training standards (valid at national level). Qualifications leading to a certain national occupational profile need to be described in terms of learning outcomes and to be allocated the corresponding EQF level.
The update of the occupational profiles is made through an institutional process involving also social parties and approved in State-regions conference.
The above-mentioned Legislative Decree 226/05 defines also the essential levels of competence assessment and certification. Regions ensure the fulfilment of essential levels related to the assessment and certification of competencies: every year an examination commission made up of teachers and experts (as established in Article 19 of the decree) evaluate the level of achievement of learning outcomes; at the end of the pathways, students must pass an exam.
Technical and vocational school programmes ([30]Istituti tecnici e istituti professionali.)
The education ministry defines by legislative decree, for each kind of pathway, the areas of the curriculum (i.e. Agricultural, Industry, etc.), the timetable of subjects and the educational cultural and professional profile ([31]Profilo Educativo culturale e professionale P.E.Cu.P.)) of pupils. The educational cultural and professional profile is a document describing the skills, abilities and knowledge that the student must possess at the end of pathways. The purpose is gives references and guideline useful for the defining the curriculum of the pathways.
Technical schools offer pathways in 11 areas allocated in two sectors: economic sector and technological sector ([32]Decreto del Presidente della Repubblica, 15 marzo 2010, n. 88 and Decreto del Presidente della Repubblica 31 luglio 2017, n. 134.).
Vocational schools offer pathways in six areas allocated in two sectors: service sector and industry and craft sector. Each school can decline these courses according to the local context consistent with the priorities indicated by the regions ([33]Decreto Legislativo, 13 aprile 2017, n. 61:
https://www.gazzettaufficiale.it/eli/id/2017/05/16/17G00069/sg).
At the end of both pathways, pupils must pass the State exam that consists of two written test and an oral test. The first written test is common to all pathways of the upper secondary education, while the second is specific for each pathway. The education ministry defines by decree the evaluation grids for the assignment of the exam marks.
Higher technical education and training programmes (IFTS) ([34]Istruzione e formazione tecnica superiore.)
The institution of the higher technical education and training pathways is planned by the regions, within their exclusive competences in the planning of the training offer. At national level a joint Decree (2013) adopted by the education minister and the labour minister (in accordance with the State-regions conference) defines the 20 specialisation areas for the training offer and the minimum standard of skills. Additional skills may be further defined at regional level, based on the analysis of local professional needs and through consultation with institutions and social partners. At the end of pathways, pupils must pass an exam for the assessment of competence acquired. The examination commission is composed taking into account the indications of the region and made up by representatives of the school, university, vocational training and the world of work.
Higher Technical Institutes (ITS) ([35]Istituti di Istruzione Tecnica superiore. More information available at:
http://www.sistemaits.it/istituti-tecnici-superiori-its.php)
Qualifications on offer by higher technical institutes are the result of a strong synergy between different actors: enterprises, universities/centres of scientific and technological research, schools, and local authorities. The qualifications are designed in six technological areas envisaged by Article 7 of the Prime Minister’s Decree of 25 January 2008 (sustainable mobility, new technologies for life, new technologies for ‘Made in Italy’ products, innovative technologies for cultural heritage and tourism, information and communication technologies, energy efficiency) that are considered priorities for the support of the economic development and competitiveness of the Italian production system. For each area, national reference figures are identified to diversify the training offer so that it is consistent with the needs of the territory in which the higher technical institute operates: to date, there are 29 national reference figures. Each higher technical institute. also defines, for each national reference figure, a specific technical professional profile based on the needs of the territory in which it operates. The 29 figures are characterised by a common cultural and professional profile and technical-professional skills. In particular, the course provides the following competences: basic (language, communication and social, scientific and technological, legal and economic, organisational and managerial) and technical-professional competences.
At the end of the courses, learners must pass a final exam for the assessment of the competences acquired through the learning process. The examination board is made up of representatives of the training provider (e.g. school, university, vocational training) and experts coming from the labour market.